Document Overview
Document Overview This article covers the Supplier’s Declaration of Conformity (SDoC) issued under the Federal Communications Commission (FCC) framework for the ETENWOLF P100 Ball Pump. The declaration was prepared and signed by Waltek Testing Group (Shenzhen) Co., Ltd., an FCC-designated test firm holding FCC Designation…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- North America: FCC / UL
Document Overview
This article covers the Supplier’s Declaration of Conformity (SDoC) issued under the Federal Communications Commission (FCC) framework for the ETENWOLF P100 Ball Pump. The declaration was prepared and signed by Waltek Testing Group (Shenzhen) Co., Ltd., an FCC-designated test firm holding FCC Designation No. CN5010 and Test Firm Registration No. 125990. The document reference number is WTH25X04098554E (Registration No. WTH25X04098554), and it was formally issued on 2025-04-23. The scope of this SDoC confirms that the P100 Ball Pump was evaluated against the applicable electromagnetic interference and emission requirements mandated by the FCC for unintentional radiators placed on the US market.
Product Information
The product covered by this certification is the ETENWOLF P100 Ball Pump, a portable inflation tool designed for inflating sports balls and similar equipment. Key identification details are listed below.
| Field | Details |
|---|---|
| Product Name | Ball Pump |
| Model | P100 |
| Trade Name | — |
| Applicant | Guangdong Bestek Technology Co., LTD |
| Manufacturer | Guangdong Bestek Technology Co., LTD |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Ratings | Refer to the test report |
Test samples were evaluated in an engineering configuration. The final production units must carry labelling compliant with FCC Section 15.19(a) requirements before being marketed in the United States.
Key Details
The following table summarises the critical certification data extracted from the FCC-SDoC document.
| Parameter | Value |
|---|---|
| Reference No. | WTH25X04098554E |
| Registration No. | WTH25X04098554 |
| Document Type | FCC Supplier’s Declaration of Conformity (SDoC) |
| Issuing Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| FCC Designation No. | CN5010 |
| Test Firm Registration No. | 125990 |
| Test Standard | 47 CFR FCC Part 15, Subpart B |
| Measurement Procedure | ANSI C63.4:2014 and ANSI C63.4a-2017 |
| Compliance Result | Compliant |
| Signed By | Jandy So, General Manager |
| Date of Issue | 2025-04-23 |
The declaration statement is based on a single evaluation of the submitted sample and does not imply an assessment of the entire production batch. A FCC Conformity Letter of Authorization for marketing may be required for the final product when needed.
Standards & Compliance
The P100 Ball Pump was tested and found compliant with the following regulatory standards and measurement procedures.
- 47 CFR FCC Part 15, Subpart B — Unintentional Radiators: This subpart establishes technical standards limiting the radio frequency (RF) emissions from digital devices and other electronic equipment that may unintentionally generate radio frequency energy. Compliance ensures the product does not cause harmful interference to licensed radio services.
- ANSI C63.4:2014 — American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. This is the primary measurement methodology referenced in the SDoC.
- ANSI C63.4a-2017 — Amendment to ANSI C63.4:2014, incorporating updated measurement procedures and clarifications applicable to the test scope.
- FCC Section 15.19(a) Labelling Requirements — The final product label must include the required FCC compliance statement or logo as specified under this section before the product enters the US market.
Specific test configurations and detailed measurement results are published by Waltek Testing Group (Shenzhen) Co., Ltd. and are available as part of the full test report package associated with Registration No. WTH25X04098554.
Validity & Certification Body
The SDoC was issued on 2025-04-23 and signed by Jandy So, General Manager of Waltek Testing Group (Shenzhen) Co., Ltd. FCC SDoC documents do not carry a fixed expiry date; however, the declaration remains valid only as long as the product design, components, and construction remain unchanged from the tested engineering sample. Any modifications that could affect RF emissions performance would require re-evaluation and a new declaration.
The issuing body details are as follows:
| Field | Details |
|---|---|
| Laboratory Name | Waltek Testing Group (Shenzhen) Co., Ltd. |
| FCC Designation No. | CN5010 |
| Test Firm Registration No. | 125990 |
| Telephone | +86-755-33663308 |
| Fax | +86-755-33663309 |
| Website | http://www.waltek.com.cn |
| [email protected] | |
| Signatory | Jandy So, General Manager |
| Date Signed | 2025-04-23 |
Frequently Asked Questions
- What does FCC-SDoC mean for the P100 Ball Pump?
- FCC-SDoC stands for Supplier’s Declaration of Conformity. It means the manufacturer, Guangdong Bestek Technology Co., LTD, has had the P100 Ball Pump independently tested by an FCC-designated laboratory — Waltek Testing Group — and confirmed that it meets the radio frequency emission limits set out in 47 CFR Part 15, Subpart B. This allows the product to be legally sold and marketed in the United States.
- Which test standards were used to certify the P100?
- The P100 was tested against 47 CFR FCC Part 15, Subpart B, using measurement procedures defined in ANSI C63.4:2014 and its amendment ANSI C63.4a-2017. These standards cover radio-noise emission measurements from low-voltage electrical and electronic equipment.
- Does this SDoC cover the entire production run of the P100?
- No. As stated in the document, the declaration is based on a single evaluation of the submitted engineering sample. It does not imply assessment of the whole production. Manufacturers are responsible for ensuring production units conform to the same design and construction as the tested sample.
- What labelling must the P100 carry under FCC rules?
- The final product must carry labelling that complies with FCC Section 15.19(a). This typically includes a statement confirming the device complies with Part 15 of the FCC Rules, and that it may not cause harmful interference and must accept any interference received. A FCC Conformity Letter of Authorization may also be required for marketing, depending on the distribution channel and final product configuration.
Related Documents
For a comprehensive compliance profile of the P100 Ball Pump, the following related certification and documentation types are recommended:
- CE Declaration of Conformity — Required for sale in the European Economic Area, covering applicable directives such as the Low Voltage Directive (LVD) and EMC Directive.
- RoHS Compliance Certificate — Confirms restriction of hazardous substances including lead, mercury, and cadmium, required under EU RoHS Directive 2011/65/EU.
- REACH SVHC Declaration — Addresses the presence or absence of Substances of Very High Concern under REACH Regulation (EC) No 1907/2006.
- UN38.3 Test Report — If the P100 contains or is shipped with lithium batteries, a UN38.3 transportation safety test report is required for air and ground freight compliance.
- KC Certification — Required for the South Korean market under the KC mark framework, covering safety and EMC requirements for electrical products.
- Full FCC Test Report — The detailed measurement data and test configurations supporting this SDoC, published by Waltek Testing Group under Registration No. WTH25X04098554.
Document Pages
