Document Overview
Document Overview This article covers the RoHS Verification of Conformity issued for the ETENWOLF S7 tire inflator pump. The document confirms that the product has been tested and found compliant with the EU RoHS Directive 2011/65/EU and its amendment (EU) 2015/863. Document Type: RoHS Verification…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This article covers the RoHS Verification of Conformity issued for the ETENWOLF S7 tire inflator pump. The document confirms that the product has been tested and found compliant with the EU RoHS Directive 2011/65/EU and its amendment (EU) 2015/863.
- Document Type: RoHS Verification of Conformity
- Reference Number: WTH25X04079095C
- Registration Number: WTH25X04079095
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Date of Issue: 2025-04-23
- Scope: Determination of levels of ten regulated hazardous substances in electrotechnical products, covering lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), DEHP, DBP, BBP, and DIBP.
The certificate is issued on a voluntary basis and refers solely to the sample submitted for testing. It does not imply assessment of the entire production line and does not permit use of the test laboratory logo. CE marking may be affixed to demonstrate compliance with the applicable regulations.
Product Information
The product certified under this RoHS document is the ETENWOLF Vortex S7 Tire Inflator, a portable inflator pump designed for automotive and outdoor use.
| Field | Details |
|---|---|
| Sample Name | Inflator Pump |
| Model Number | S7 |
| Reference Model Number | NA |
| Brand | ETENWOLF |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The S7 is engineered to meet stringent environmental and safety standards for global markets, including the European Union. RoHS compliance is a key requirement for electrotechnical consumer products sold within the EU.
Key Details
The certification covers the ten regulated substances defined under the RoHS Directive and its amendment. The table below summarizes each substance and its relevance to the directive.
| Regulated Substance | Abbreviation | RoHS Threshold (max) |
|---|---|---|
| Lead | Pb | 0.1% (1000 ppm) |
| Mercury | Hg | 0.1% (1000 ppm) |
| Cadmium | Cd | 0.01% (100 ppm) |
| Hexavalent Chromium | Cr(VI) | 0.1% (1000 ppm) |
| Polybrominated Biphenyls | PBB | 0.1% (1000 ppm) |
| Polybrominated Diphenyl Ethers | PBDE | 0.1% (1000 ppm) |
| Bis(2-ethylhexyl) phthalate | DEHP | 0.1% (1000 ppm) |
| Dibutyl phthalate | DBP | 0.1% (1000 ppm) |
| Benzyl butyl phthalate | BBP | 0.1% (1000 ppm) |
| Diisobutyl phthalate | DIBP | 0.1% (1000 ppm) |
Technical documentation was prepared in accordance with EN IEC 63000:2018, which defines the technical documentation requirements for evaluating electrotechnical products with respect to the restriction of hazardous substances. All ten substances were tested and confirmed within permissible limits, enabling CE marking to be affixed to the S7.
Standards & Compliance
Testing was carried out by Waltek Testing Group against the following IEC standards for determination of regulated substance levels in electrotechnical products:
| Standard | Scope |
|---|---|
| IEC 62321-3-1:2013 | Screening – X-ray fluorescence spectrometry |
| IEC 62321-4:2013+AMD1:2017 CSV | Mercury determination by CV-AAS, CV-AFS, ICP-OES and ICP-MS |
| IEC 62321-5:2013 | Cadmium, lead and chromium by AAS, AFS, ICP-OES and ICP-MS; chromium(VI) by photometric methods |
| IEC 62321-7-1:2015 | Hexavalent chromium – colorimetric method for polymer and electronics |
| IEC 62321-7-2:2017 | Hexavalent chromium – speciation of chromium in corrosion-protected coatings |
| IEC 62321-6:2015 | Polybrominated biphenyls and polybrominated diphenyl ethers by GC-MS |
| IEC 62321-8:2017 | Phthalates (DEHP, BBP, DBP, DIBP) in polymers by GC-MS |
Compliance with these standards provides the presumption of conformity with the essential requirements of RoHS Directive 2011/65/EU. The verification also satisfies the technical documentation requirements of EN IEC 63000:2018, supporting the affixing of the CE marking on the product.
Validity & Certification Body
The Verification of Conformity bearing Reference No. WTH25X04079095C was issued on 2025-04-23 and signed by Jandy So, GM of Waltek Testing Group (Shenzhen) Co., Ltd.
- Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
- Website: www.waltek.com.cn
- Telephone: +86-755-33663308
- Fax: +86-755-33663309
- Email: [email protected]
This certificate is issued on a voluntary basis. It applies exclusively to the sample submitted for evaluation and should not be interpreted as an ongoing conformity assessment of the full production line. The test laboratory logo may not be used in connection with this certificate. Manufacturers are advised to monitor for updates to the RoHS Directive and re-evaluate compliance accordingly.
Frequently Asked Questions
- What does the RoHS certificate for the ETENWOLF S7 confirm?
-
The RoHS certificate (Reference No. WTH25X04079095C) confirms that the ETENWOLF S7 tire inflator has been tested by Waltek Testing Group and found compliant with EU RoHS Directive 2011/65/EU and amendment (EU) 2015/863. All ten regulated hazardous substances — including lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs, and four phthalates — were confirmed below the maximum permitted thresholds.
- Which testing standards were used to evaluate the S7 for RoHS compliance?
-
Seven IEC standards were applied: IEC 62321-3-1:2013, IEC 62321-4:2013+AMD1:2017 CSV, IEC 62321-5:2013, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-6:2015, and IEC 62321-8:2017. These cover screening, heavy metal determination, hexavalent chromium speciation, brominated flame retardants, and phthalates analysis.
- Can the ETENWOLF S7 be legally sold in the European Union?
-
RoHS compliance is one of the mandatory requirements for placing electrotechnical products on the EU market. The S7 has satisfied RoHS testing requirements, and CE marking may be affixed. However, other applicable EU Directives must also be observed and verified separately before the product is placed on the EU market.
- Does this certificate cover all units of the S7 in production?
-
No. As stated by Waltek Testing Group, this Verification of Conformity refers only to the specific sample submitted for testing. It does not constitute an assessment of the entire production run. Manufacturers should implement quality control processes to ensure ongoing compliance across all production units.
Related Documents
For a complete compliance profile of the ETENWOLF S7 tire inflator, the following related certification and test documents are typically required or recommended for global market access:
- CE Declaration of Conformity — Full EU market access document covering all applicable directives (LVD, EMC, RoHS).
- REACH Compliance Report — Confirms absence of Substances of Very High Concern (SVHCs) per REACH Regulation (EC) No 1907/2006.
- FCC Declaration of Conformity — Required for US market entry; covers electromagnetic emissions for electronic devices.
- UN 38.3 Test Report — Required if the S7 contains a lithium-ion battery, covering transport safety per UN 38.3.
- KC Certification — Required for the South Korean market under the KC Mark framework.
- IEC 62321 Series Test Reports — Underlying laboratory test reports supporting the RoHS substance determination results referenced in certificate WTH25X04079095C.
Document Pages
