Document Overview
Document Overview This article covers the RoHS Verification of Conformity issued for the ETENWOLF V3 Air Inflator. The document confirms compliance with the European Union’s Restriction of Hazardous Substances Directive RoHS 2011/65/EU and its amendment (EU) 2015/863. Document Type: Verification of Conformity (RoHS Certificate) Issuing…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This article covers the RoHS Verification of Conformity issued for the ETENWOLF V3 Air Inflator. The document confirms compliance with the European Union’s Restriction of Hazardous Substances Directive RoHS 2011/65/EU and its amendment (EU) 2015/863.
- Document Type: Verification of Conformity (RoHS Certificate)
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Date of Issue: 2025-06-17
- Scope: Determination of levels of ten regulated hazardous substances in electrotechnical products
- Reference Number: WTH25X05129148C
- Registration Number: WTH25X05129148
The certificate states that CE marking may be affixed to demonstrate compliance with the applicable regulations, following preparation of the required technical documentation per EN IEC 63000:2018.
Product Information
The certified product is the ETENWOLF V3 Air Inflator, an electrotechnical inflation tool manufactured and supplied by Guangdong Bestek Technology Co., Ltd.
| Field | Details |
|---|---|
| Sample Name | Air Inflator |
| Model Number | V3 |
| Reference Model Number | NA |
| Brand | NA (marketed under ETENWOLF) |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The RoHS directive restricts the use of ten hazardous substances in electrical and electronic equipment. The V3 Air Inflator was tested and found compliant with all applicable substance limits. The ten regulated substances assessed are listed below.
| # | Substance | Abbreviation |
|---|---|---|
| 1 | Lead | Pb |
| 2 | Mercury | Hg |
| 3 | Cadmium | Cd |
| 4 | Hexavalent Chromium | Cr(VI) |
| 5 | Polybrominated Biphenyls | PBB |
| 6 | Polybrominated Diphenyl Ethers | PBDE |
| 7 | Bis(2-ethylhexyl) phthalate | DEHP |
| 8 | Dibutyl phthalate | DBP |
| 9 | Benzylbutyl phthalate | BBP |
| 10 | Diisobutyl phthalate | DIBP |
The four phthalates (DEHP, DBP, BBP, DIBP) were added to the restricted substances list under amendment (EU) 2015/863, effective July 2019. All ten substances were tested and found within permissible limits for the V3 unit submitted as a sample.
Standards & Compliance
Testing was conducted in accordance with the following IEC standards. These standards are internationally recognised and provide presumption of conformity with RoHS 2011/65/EU.
| Standard | Scope |
|---|---|
| IEC 62321-3-1:2013 | Screening — X-ray fluorescence spectrometry |
| IEC 62321-4:2013+AMD1:2017 CSV | Mercury determination — CV-AAS, CV-AFS, ICP-OES, ICP-MS |
| IEC 62321-5:2013 | Cadmium, lead, and chromium in polymers and electronics; cadmium and lead in metals |
| IEC 62321-6:2015 | Polybrominated biphenyls and polybrominated diphenyl ethers in polymers |
| IEC 62321-7-1:2015 | Hexavalent chromium in colorless and colored corrosion-protected coatings |
| IEC 62321-7-2:2017 | Hexavalent chromium in polymers and electronics |
| IEC 62321-8:2017 | Phthalates in polymers by GC-MS |
| EN IEC 63000:2018 | Technical documentation for assessment of electrical and electronic products with respect to the restriction of hazardous substances |
The test results provide grounds for affixing the CE marking on the product to demonstrate regulatory compliance in the European market.
Validity & Certification Body
This Verification of Conformity was signed by Jandy So, GM, and issued on 2025-06-17 by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory.
| Field | Details |
|---|---|
| Certificate Reference No. | WTH25X05129148C |
| Registration No. | WTH25X05129148 |
| Date of Issue | 2025-06-17 |
| Signed By | Jandy So, GM |
| Issuing Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Laboratory Website | http://www.waltek.com.cn |
| Telephone | +86-755-33663308 |
| Fax | +86-755-33663309 |
| [email protected] |
Important notice: This Verification of Conformity confirms compliance on a voluntary basis and refers only to the specific sample submitted for testing. It does not imply an assessment of the entire production run and does not permit use of the Waltek test lab logo.
Frequently Asked Questions
- What does the RoHS certificate for the V3 Air Inflator confirm?
-
The RoHS certificate confirms that the ETENWOLF V3 Air Inflator was tested and found compliant with EU Directive 2011/65/EU and its amendment (EU) 2015/863. All ten restricted hazardous substances — including lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs, and four phthalates — were found within permissible limits in the tested sample.
- Which testing laboratory issued the V3 RoHS certificate?
-
The certificate was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing and certification body based in Shenzhen, China. The certificate reference number is WTH25X05129148C, issued on 2025-06-17.
- Can the CE marking be used based on this RoHS certificate?
-
Yes. According to the certificate, CE marking may be affixed to demonstrate compliance, provided the necessary technical documentation has been prepared in accordance with EN IEC 63000:2018. Other relevant EU Directives must also be observed alongside the RoHS Directive.
- Does this certificate cover all units of the V3 Air Inflator in production?
-
No. As stated in the certificate, this Verification of Conformity refers only to the specific sample submitted for testing. It does not imply an assessment of the entire production run and should not be interpreted as a blanket approval for all manufactured units.
Related Documents
For a complete compliance picture of the ETENWOLF V3 Air Inflator, the following related certification and test documents are recommended:
- CE Declaration of Conformity — Formal declaration covering all applicable EU directives including Low Voltage Directive (LVD) and EMC Directive, required for CE marking in the European market.
- EMC Test Report — Electromagnetic compatibility testing to verify the V3 does not cause or suffer from electromagnetic interference.
- UN 38.3 Battery Test Report — If the V3 includes a lithium battery, a UN 38.3 transport safety test report is required for air and sea freight compliance.
- REACH SVHC Declaration — Substance of Very High Concern screening under the REACH Regulation (EC) No 1907/2006 for full chemical compliance disclosure.
- FCC / IC Certification — Radio frequency and electrical safety approvals required for sale in the United States and Canada.
- KC Certification — South Korean electrical safety certification required for distribution in the Republic of Korea market.
Document Pages
