Document Overview
Document Overview This article covers the official CE Electromagnetic Compatibility (EMC) test report issued for the S6C inflator pump manufactured by Guangdong Bestek Technology Co., Ltd. under the ETENWOLF brand. The report was prepared and issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This article covers the official CE Electromagnetic Compatibility (EMC) test report issued for the S6C inflator pump manufactured by Guangdong Bestek Technology Co., Ltd. under the ETENWOLF brand. The report was prepared and issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited electromagnetic compatibility testing laboratory operating under internal procedure reference HCT/RF-23-21.
- Reference Number: WTH25H07183680E
- Document Type: CE-EMC Test Report
- Test Report Form Number: TRF EN IEC 55014-1: 2021-EMC-001-V01
- Date of Sample Receipt: 2025-07-11
- Date of Testing: 2025-07-15 to 2025-07-17
- Date of Issue: 2025-07-25
- Overall Test Result: Pass
The report confirms that the S6C inflator pump meets the electromagnetic compatibility requirements applicable to household and similar electrical appliances under the CE marking framework for the European market.
Product Information
The Equipment Under Test (EUT) evaluated in this report is the S6C inflator pump, a portable motorized inflation device designed for automotive, sports, and household inflation applications.
| Field | Details |
|---|---|
| Product Name | Inflator Pump |
| Model Number | S6C |
| Brand | ETENWOLF |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Applicant Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The S6C is classified as a household and similar electrical appliance for the purposes of the applicable EMC standards, requiring evaluation of both conducted and radiated electromagnetic emissions as well as immunity to voltage fluctuations and harmonics on the mains supply.
Key Details
The following table summarizes the core test parameters and administrative details recorded in report WTH25H07183680E.
| Parameter | Value |
|---|---|
| Reference Number | WTH25H07183680E |
| Internal Procedure Reference | HCT/RF-23-21 |
| Test Report Form | TRF EN IEC 55014-1: 2021-EMC-001-V01 |
| Test Standards Applied | EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A2:2021 |
| Sample Receipt Date | 2025-07-11 |
| Test Period | 2025-07-15 to 2025-07-17 |
| Issue Date | 2025-07-25 |
| Test Result | Pass |
| Prepared By | Snow Zeng |
| Approved By | Tony Wu |
| Testing Laboratory | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Laboratory Address | Building B, Tianji Industrial Park, 1/F. & 2/F. & 3/F., No.30-9, Laiyin Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, China |
| Laboratory Tel | 0755-84616666 |
| Service Tel | 400-0066-989 |
| Laboratory Email | [email protected] |
The report spans 56 pages and includes general product information, test standards, test summary, test methodology, facility details, and full measurement data across all applicable EMC test categories.
Standards & Compliance
The S6C inflator pump was evaluated against the following harmonized European standards applicable to household and similar electrical appliances under the CE marking directive for electromagnetic compatibility:
| Standard | Scope |
|---|---|
| EN IEC 55014-1:2021 | Electromagnetic disturbances — Requirements for household appliances, electric tools, and similar apparatus — Part 1: Emission |
| EN IEC 55014-2:2021 | Electromagnetic disturbances — Requirements for household appliances, electric tools, and similar apparatus — Part 2: Immunity |
| EN IEC 61000-3-2:2019+A1:2021 | Electromagnetic compatibility (EMC) — Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
| EN 61000-3-3:2013+A2:2021 | Electromagnetic compatibility (EMC) — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems |
Compliance with these standards demonstrates that the S6C does not generate excessive electromagnetic interference and maintains functional performance in the presence of typical electromagnetic disturbances, satisfying the essential requirements of the EU EMC Directive 2014/30/EU for CE marking.
Validity & Certification Body
The test report WTH25H07183680E was issued on 2025-07-25 by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an established third-party testing and certification laboratory based in Shenzhen, China, operating as part of the Waltek Testing Group network.
- Issuing Laboratory: Waltek Testing Group HCT (Shenzhen) Co., Ltd.
- Laboratory Address: Building B, Tianji Industrial Park, 1/F. & 2/F. & 3/F., No.30-9, Laiyin Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, China
- Issue Date: 2025-07-25
- Report Validity: The report is valid as issued for the specific product model, configuration, and sample tested. Any design or component changes to the S6C may require re-evaluation.
- Prepared By: Snow Zeng
- Approved By: Tony Wu
- Contact: [email protected] | Tel: 400-0066-989
CE-EMC test reports of this type support the Declaration of Conformity required for lawful placement of the S6C on the European Economic Area market. The report does not carry an expiration date in the conventional sense but is tied to the tested product configuration as documented within the 56-page report body.
Frequently Asked Questions
- What does the CE-EMC test result of Pass mean for the S6C inflator pump?
-
A Pass result means the S6C inflator pump met all electromagnetic emission and immunity limits defined by EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021, and EN 61000-3-3:2013+A2:2021. The device neither emits excessive electromagnetic interference nor is it susceptible to common electromagnetic disturbances, making it compliant with the EU EMC Directive 2014/30/EU.
- Which laboratory conducted the CE-EMC testing for the S6C?
-
The testing was conducted by Waltek Testing Group HCT (Shenzhen) Co., Ltd., located in Longgang District, Shenzhen, China. The report reference number is WTH25H07183680E, issued on 2025-07-25. The laboratory can be contacted at [email protected] or by calling 400-0066-989.
- What standards were used to test the S6C inflator pump for EMC compliance?
-
The S6C was tested against four harmonized European standards: EN IEC 55014-1:2021 (emissions), EN IEC 55014-2:2021 (immunity), EN IEC 61000-3-2:2019+A1:2021 (harmonic current emissions), and EN 61000-3-3:2013+A2:2021 (voltage fluctuations and flicker).
- Does this report cover CE safety certification as well as EMC?
-
No. Report WTH25H07183680E covers CE-EMC compliance only. CE marking for a product like the S6C inflator pump may also require separate evaluations under the Low Voltage Directive (LVD) and potentially the Machinery Directive, depending on the product’s electrical and mechanical characteristics. Refer to related documents for other applicable certifications.
Related Documents
The following certification and compliance document types are typically required or recommended for a product such as the S6C inflator pump to support full market access across key global regions:
- CE-LVD (Low Voltage Directive): Covers electrical safety requirements under Directive 2014/35/EU, complementing this EMC report for full CE marking.
- CE Declaration of Conformity (DoC): The formal declaration citing this report (WTH25H07183680E) as evidence of EMC compliance under Directive 2014/30/EU.
- FCC Part 15B Report: Required for the US market, covering unintentional emitter EMC limits for electronic devices.
- KC Certification (KCC): South Korea market EMC and safety certification required for electrical appliances.
- RoHS Compliance Report: Confirms restriction of hazardous substances in electrical and electronic equipment for EU and other markets.
- REACH Declaration: Substance compliance documentation relevant for the EU chemical regulatory framework.
- UN38.3 Test Report: Applicable if the S6C model variant includes a lithium battery, covering transport safety requirements.
Document Pages
