UN38.3 Air Transport Identification and Classification Report — ETENWOLF HB1 Air Pump PUMP MINI Lithium-ion Battery

Document Overview

Document Overview This page presents the Identification and Classification Report for Air Transport of Goods issued for the ETENWOLF HB1 Air Pump PUMP MINI and its contained lithium-ion battery pack. The report was issued by Beijing DGM Air Transport Technology Development Co., Ltd. (DGM China),…

Document type
Certification Report
Prepared by
Michelle Torres
Published
Last reviewed
Topics
International Transportation: CB / MSDS / UN38.3

Document Overview

This page presents the Identification and Classification Report for Air Transport of Goods issued for the ETENWOLF HB1 Air Pump PUMP MINI and its contained lithium-ion battery pack. The report was issued by Beijing DGM Air Transport Technology Development Co., Ltd. (DGM China), a recognised Dangerous Goods Management authority responsible for air transport classification under IATA Dangerous Goods Regulations (DGR).

Field Detail
Report Number PEKSZ202510308891
Document Type Identification and Classification Report for Air Transport
Issuing Body Beijing DGM Air Transport Technology Development Co., Ltd.
Effective / Issued Date 2025-10-30
Applicant Guangdong Bestek Technology Co., LTD
Scope Air transport classification of lithium-ion battery contained in equipment
Validity Valid within the calendar year the applicable IATA DGR edition is in force

The report confirms that the product and its battery have been assessed against current UN Manual of Tests and Criteria requirements and IATA DGR packing instruction provisions, qualifying the goods for commercial air transport.

Product Information

The product covered by this report is the ETENWOLF HB1 Air Pump, marketed under the sub-model name PUMP MINI. The pump contains an integrated lithium-ion battery pack with the following technical characteristics.

Parameter Value
Product Name Air Pump PUMP MINI
Battery Pack Model 1S1P-1100
Battery / Cell Classification Single Cell Li-ion Battery
Configuration 1S1P (1 series, 1 parallel)
Nominal Voltage 3.7 V
Rated Capacity 1100 mAh
Watt-hour Rating 4.07 Wh
Cell Size 19.4 × 33.7 mm (blue cylinder)
Net Mass per Package (120 cells) 3.144 kg
Number of Cells per Package 120
Lithium Content N/A (lithium-ion type)
Manufacturer Guangdong Bestek Technology Co., LTD
Manufacturer Address No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China

The battery is a lithium-ion cell of the cylindrical blue type. The HB1 PUMP MINI is classified as lithium-ion batteries contained in equipment for air transport purposes, meaning the battery is installed inside the pump device during shipment.

Key Details

The classification assessment and UN38.3 test summary for the HB1 battery pack are documented below. All eight sub-tests required by UN38.3 were performed and passed.

UN38.3 Test Results Summary

Test Description Result
T.1 Altitude Simulation Pass
T.2 Thermal Test Pass
T.3 Vibration Pass
T.4 Shock Pass
T.5 External Short Circuit Pass
T.6 Impact / Crush Pass
T.7 Overcharge Pass
T.8 Forced Discharge Pass

Air Transport Classification

Field Detail
UN/ID Number UN3481 (PI 967 Section II — Lithium-ion batteries contained in equipment)
Packing Instruction PI 967, Section II
Passenger and Cargo Aircraft Permitted
Cargo Aircraft Only Permitted
Subsidiary Risk None
Packing Group N/A

Additional Declaration Conditions

  • The batteries are not returned-to-manufacturer, waste, or disposal-purpose batteries.
  • Batteries are manufactured under a quality management programme as described in UN38.3 Section 3.9.2.6.1(e).
  • Each package has been assessed and is capable of withstanding a force equivalent to the total mass of identical packages stacked to a height of 3 m for a duration of 24 hours.
  • Batteries and cells must be protected to prevent short circuits, and the equipment must have an effective means of preventing accidental activation.
  • Each package is marked with the required battery mark.

Test Laboratory

Field Detail
Test Lab Waltek Testing Group Co., Ltd.
Lab Address No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China
Test Report Number PEKSZ202510308891
Date of Test Report 2025-10
UN Manual Edition Used UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.8, Subsection 38.3
Tel +86-769-2267 6998
Email [email protected]
Website www.waltek.com.cn

Standards & Compliance

The HB1 PUMP MINI battery pack has been evaluated against the following international standards and regulatory frameworks.

Standard / Regulation Description Role in This Report
UN38.3 (ST/SG/AC.10/11/Rev.8) UN Manual of Tests and Criteria, Part III, Sub-section 38.3 — Lithium Metal and Lithium-ion Batteries Primary test standard; all 8 tests passed
IATA Dangerous Goods Regulations (DGR) — Current Edition International Air Transport Association rules governing air shipment of dangerous goods including lithium batteries Classification and packing instruction basis (PI 967 Section II)
IATA PI 967, Section II Packing instruction for lithium-ion batteries contained in equipment (<100 Wh per battery) Applicable packing instruction confirmed

The report was issued in compliance with the terms and conditions of DGM China, which requires the applicant to provide true and accurate samples and data. The classification is based solely on the sample provided by the applicant (Guangdong Bestek Technology Co., LTD) and is the responsibility of DGM China only for that sample.

Validity & Certification Body

Validity Period

This identification and classification report is valid within the calendar year in which the applicable edition of the IATA Dangerous Goods Regulations is in force. The report was issued on 2025-10-30 and is therefore valid for the 2025 IATA DGR edition year. It must be renewed when a new IATA DGR edition takes effect.

The report becomes invalid if any of the following occurs: illegal transfer, reproduction, embezzlement, impersonation, modification, or tampering in any media form. It is only valid after being signed by the inspector, checker, and approver, and stamped by DGM China. Duplication without DGM China’s written approval is prohibited.

Issuing Authority

Field Detail
Issuing Body Beijing DGM Air Transport Technology Development Co., Ltd. (DGM China)
Address Altitude 101300, Beijing, China
Tel 010-69479673
Fax 010-69479621
Website www.dgmchina.com.cn
Email [email protected]

Applicant on Record

Field Detail
Applicant / Consignor Guangdong Bestek Technology Co., LTD
Address No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China
Tel 0762-3429081
Email [email protected]

Frequently Asked Questions

What does the UN38.3 certification mean for the ETENWOLF HB1 air pump battery?

UN38.3 is the internationally recognised test standard for lithium batteries intended for transport. It requires batteries to pass eight specific safety tests — covering altitude simulation, thermal extremes, vibration, shock, external short circuit, impact or crush, overcharge, and forced discharge. The HB1 PUMP MINI battery pack (1S1P-1100, 3.7 V, 4.07 Wh) passed all eight tests, confirming it is safe for commercial air transport.

Can the HB1 PUMP MINI be shipped on passenger aircraft?

Yes. According to report PEKSZ202510308891, the HB1 battery qualifies under IATA PI 967 Section II, which permits carriage on both passenger and cargo aircraft, subject to standard IATA DGR conditions such as short-circuit protection and anti-activation measures.

How long is the UN38.3 report valid?

The report is valid within the calendar year of the IATA Dangerous Goods Regulations edition under which it was issued. Report PEKSZ202510308891, issued on 2025-10-30, is valid for the 2025 IATA DGR year. Shippers should verify currency when a new IATA DGR edition is released.

Which test laboratory performed the UN38.3 tests for the HB1 battery?

The UN38.3 tests were conducted by Waltek Testing Group Co., Ltd., located at No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China. The tests were completed in October 2025 using the UN Manual of Tests and Criteria, ST/SG/AC.10/11/Rev.8, Subsection 38.3.

Related Documents

For complete regulatory compliance of the HB1 PUMP MINI across all markets and transport modes, the following certification documents are typically required alongside this UN38.3 report.

  • IEC 62133 Battery Safety Certificate — Confirms electrochemical safety of the lithium-ion cell under standard use and abuse conditions, required for many consumer electronics markets.
  • CE Declaration of Conformity (LVD / EMC) — Required for sale in the European Economic Area; covers low-voltage safety and electromagnetic compatibility of the pump device.
  • FCC ID Certification — Required for the US market; covers radio frequency emissions and equipment authorisation.
  • RoHS Compliance Certificate — Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) in the product and battery, required for EU and many global markets.
  • REACH SVHC Declaration — Confirms absence or declaration of substances of very high concern under EU REACH regulation.
  • KC Certification (Korea) — Required for sale in the Republic of Korea; covers electrical safety and EMC of the battery and device.
  • MSDS / Safety Data Sheet — Material Safety Data Sheet for the lithium-ion battery, often required by freight forwarders alongside the UN38.3 report for air shipment documentation.

Document Pages

Document Page 1
Document Page 2
Document Page 3
Document Page 4
Document Page 5
Document Page 6