Document Overview
Document Overview This document is a CE Low Voltage Directive (LVD) certification statement issued by Waltek Testing Group (Shenzhen) Co., Ltd., a recognized third-party testing laboratory. It confirms that the product identified below has been evaluated against the applicable harmonised European standards and found to…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This document is a CE Low Voltage Directive (LVD) certification statement issued by Waltek Testing Group (Shenzhen) Co., Ltd., a recognized third-party testing laboratory. It confirms that the product identified below has been evaluated against the applicable harmonised European standards and found to comply with EU Directive LVD 2014/35/EU.
- Document Type: CE-LVD Compliance Statement
- Registration No.: WTH25X07182968
- Reference No.: WTH25X07182968J
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Issue Date: 2025-07-17
- Applicable Directive: LVD 2014/35/EU
- Scope: Household and similar electrical appliances – General requirements and electromagnetic field measurement with regard to human exposure
Product Information
The certified product is the ETENWOLF Air3, a compact portable blowing pump designed for inflation applications. It is manufactured and supplied by Guangdong Bestek Technology Co., Ltd., the applicant of record for this certification.
| Field | Details |
|---|---|
| Product Name | Portable Blowing Pump |
| Model No. | Air3 |
| Trademark | — |
| Rated Voltage | 5 V |
| Rated Current | 2.0 A |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The following table summarises the critical compliance data extracted from the certification document for the Air3.
| Item | Value |
|---|---|
| Registration No. | WTH25X07182968 |
| Reference No. | WTH25X07182968J |
| Certification Type | CE-LVD (Low Voltage Directive) |
| EU Directive | 2014/35/EU |
| Test Standard 1 | EN IEC 60335-1:2023+A11:2023 |
| Test Standard 2 | EN 62233:2008 |
| Rated Input | 5 V DC, 2.0 A |
| Issue Date | 2025-07-17 |
| Authorised Signatory | Jandy So (Manager, Waltek Testing Group) |
| CE Marking | Permitted under manufacturer’s sole responsibility following preparation of technical documentation and EU Declaration of Conformity |
Note: This statement is based on a single evaluation of a product sample and does not imply assessment of the entire production run. All other relevant EU Directives must also be observed by the manufacturer.
Standards & Compliance
The Air3 was tested against the following harmonised European standards, which provide a presumption of conformity with the essential requirements of LVD Directive 2014/35/EU.
- EN IEC 60335-1:2023+A11:2023 — Household and similar electrical appliances, Part 1: General requirements. This standard covers safety requirements including protection against electric shock, energy hazards, mechanical hazards, and thermal hazards for household electrical appliances.
- EN 62233:2008 — Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure. This standard defines procedures for measuring EMF emissions to assess compliance with human exposure limits.
Compliance with these harmonised standards satisfies the essential health and safety requirements of LVD 2014/35/EU. The manufacturer must also prepare the EU Declaration of Conformity and compile the required technical documentation before affixing the CE marking.
Validity & Certification Body
The certification statement was issued on 2025-07-17 and is valid subject to the product continuing to meet the tested standards without design modification. Any change to product design, materials, or electrical ratings may require re-evaluation.
- Issuing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
- Website: www.waltek.com.cn
- Tel: +86-755-3366 3308
- Fax: +86-755-3366 3309
- Email: [email protected]
- Authorised Signatory: Jandy So, Manager
- Document Version: Ver.09.24
- Trademark Notice: WALTEK is a registered trademark; utilisation requires prior approval.
This statement covers the specific product sample submitted for testing and does not constitute a product certification covering ongoing production. Manufacturers are responsible for ensuring production consistency with the tested sample.
Frequently Asked Questions
- What does CE-LVD certification mean for the ETENWOLF Air3?
-
CE-LVD certification confirms that the Air3 has been tested against EU Low Voltage Directive 2014/35/EU requirements. It means the product meets the essential safety requirements for electrical equipment, covering protection against electric shock, overheating, and electromagnetic field exposure, allowing it to be legally placed on the European market with the CE mark.
- Which specific standards were used to test the Air3?
-
The Air3 was tested against two harmonised standards: EN IEC 60335-1:2023+A11:2023, which covers general safety requirements for household and similar electrical appliances, and EN 62233:2008, which covers measurement of electromagnetic fields with regard to human exposure. Both tests were carried out by Waltek Testing Group under registration number WTH25X07182968.
- Is the CE mark on the Air3 self-declared or third-party verified?
-
The CE marking for the Air3 is affixed under the sole responsibility of the manufacturer, Guangdong Bestek Technology Co., Ltd., following third-party testing by Waltek Testing Group. The test results provide a presumption of conformity with LVD 2014/35/EU. The manufacturer must also prepare the EU Declaration of Conformity and maintain the technical documentation file.
- Does this certification cover all units of the Air3 in production?
-
No. This certification statement is based on a single evaluation of a product sample. It does not imply assessment of the entire production. Manufacturers are responsible for ensuring that all production units are consistent with the tested sample to maintain valid CE compliance.
Related Documents
For a complete compliance profile of the ETENWOLF Air3 portable blowing pump, the following related certification and documentation types are typically required or recommended alongside the CE-LVD statement:
- CE-EMC Certificate — Electromagnetic Compatibility Directive 2014/30/EU testing to ensure the Air3 does not cause or suffer from electromagnetic interference.
- CE-RED Certificate — If the Air3 incorporates any wireless or Bluetooth connectivity, Radio Equipment Directive 2014/53/EU compliance would be required.
- RoHS Compliance Report — RoHS Directive 2011/65/EU restricts hazardous substances in electrical equipment sold in the EU.
- REACH Declaration — REACH Regulation (EC) No 1907/2006 compliance documentation for chemical substances used in the product.
- EU Declaration of Conformity (DoC) — The manufacturer’s formal declaration referencing all applicable EU directives and harmonised standards, required before CE marking is affixed.
- UN 38.3 Test Report — If the Air3 contains a lithium battery, UN 38.3 transport testing documentation is required for air freight compliance.
Document Pages
