Document Overview
Document Overview This document is a RoHS Verification of Conformity issued by Waltek Testing Group (Shenzhen) Co., Ltd. on August 7, 2025. The certificate confirms compliance with the European Union’s RoHS Directive 2011/65/EU and its amendment (EU) 2015/863, which restricts the use of hazardous substances…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This document is a RoHS Verification of Conformity issued by Waltek Testing Group (Shenzhen) Co., Ltd. on August 7, 2025. The certificate confirms compliance with the European Union’s RoHS Directive 2011/65/EU and its amendment (EU) 2015/863, which restricts the use of hazardous substances in electrical and electronic equipment.
The verification allows the use of CE marking to demonstrate regulatory compliance. The certificate applies to the submitted sample and was issued on a voluntary basis following completion of technical documentation according to EN IEC 63000:2018 requirements.
Registration Number: WTH25X07183756
Reference Number: WTH25X07183756C
Product Information
The certified product is an inflator pump manufactured by Guangdong Bestek Technology Co., LTD and marketed under the ETENWOLF brand.
| Specification | Details |
|---|---|
| Product Name | Inflator Pump |
| Model Number | S6C |
| Manufacturer | Guangdong Bestek Technology Co., LTD |
| Manufacturing Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R.China |
| Brand | ETENWOLF (via Guangdong Bestek Technology) |
The S6C inflator pump is designed for portable inflation applications and has been tested for hazardous substance compliance to meet international market requirements.
Key Details
The RoHS certification verifies that the S6C inflator pump has been tested for ten regulated hazardous substances and found to be in compliance with maximum concentration values established by EU regulations.
Regulated Substances Tested
| Substance Category | Specific Substances | Compliance Status |
|---|---|---|
| Heavy Metals | Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr VI) | ✓ Compliant |
| Flame Retardants | Polybrominated Biphenyls (PBB), Polybrominated Diphenyl Ethers (PBDE) | ✓ Compliant |
| Phthalates | DEHP (Bis(2-ethylhexyl) phthalate), DBP (Dibutyl phthalate), BBP (Benzyl butyl phthalate), DIBP (Diisobutyl phthalate) | ✓ Compliant |
All tested substances were found to be below the maximum concentration values permitted under RoHS 2011/65/EU and amendment (EU) 2015/863.
Standards & Compliance
The S6C inflator pump was tested according to the following international electrotechnical standards for determination of regulated substance levels:
- IEC 62321-3-1:2013 – Screening of lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
- IEC 62321-4:2013+AMD1:2017 CSV – Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
- IEC 62321-5:2013 – Cadmium, lead and chromium in polymers and electronics by AAS, AFS, ICP-OES and ICP-MS
- IEC 62321-6:2015 – Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)
- IEC 62321-7-1:2015 – Hexavalent chromium – Presence in colored polymers and paints on metals by colorimetry
- IEC 62321-7-2:2017 – Hexavalent chromium – Determination in polymers and electronics by colorimetric method
- IEC 62321-8:2017 – Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), with thermal desorption or solvent extraction
Technical documentation was prepared in accordance with EN IEC 63000:2018 requirements for assessment of electrical and electronic products with respect to the restriction of hazardous substances.
The product is eligible for CE marking based on demonstrated compliance with essential requirements of the applicable EU directive.
Validity & Certification Body
Issuing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Contact Information:
- Tel: +86-755-33663308
- Fax: +86-755-33663309
- Email: [email protected]
- Website: www.waltek.com.cn
Date of Issue: August 7, 2025
Authorized Signatory: Jandy So, GM
Important Notice: This Verification of Conformity confirms compliance with the listed requirements on a voluntary basis. The certification refers only to the sample submitted for testing and does not imply an assessment of the entire production process. The certificate does not permit the use of the test laboratory’s logo on products or marketing materials.
Manufacturers and distributors should ensure ongoing compliance throughout production and maintain technical documentation as required by applicable directives.
Frequently Asked Questions
What does RoHS certification mean for the S6C inflator pump?
RoHS certification confirms that the S6C inflator pump has been tested and verified to contain restricted hazardous substances below the maximum concentration values set by EU Directive 2011/65/EU. This means the product can be legally sold in European markets and meets environmental safety standards for electrical equipment.
Which hazardous substances are restricted under RoHS?
RoHS restricts ten substances: four heavy metals (lead, mercury, cadmium, hexavalent chromium), two flame retardants (PBB and PBDE), and four phthalates (DEHP, DBP, BBP, DIBP). The S6C has been tested for all ten substances and found compliant with maximum concentration limits.
Is this certification valid for all S6C units produced?
This certificate applies to the specific sample submitted for testing in August 2025. While it demonstrates the product design’s compliance, manufacturers must maintain consistent production processes and materials to ensure all units meet RoHS requirements. Regular compliance monitoring is recommended for ongoing production.
Can the S6C display the CE mark based on this RoHS certificate?
Yes, the certificate states that CE marking can be affixed to demonstrate compliance with RoHS Directive requirements, provided that technical documentation has been prepared according to EN IEC 63000:2018 and all other relevant EU directives have been observed. However, manufacturers should ensure full compliance with all applicable directives before applying CE marking.
Related Documents
For comprehensive compliance documentation of the S6C inflator pump, the following related certification documents may be relevant:
- REACH Certification – EU regulation on Registration, Evaluation, Authorization and Restriction of Chemicals, complementing RoHS by addressing additional substances of very high concern (SVHC)
- CE Declaration of Conformity – Comprehensive declaration covering all applicable EU directives including Low Voltage Directive (LVD), Electromagnetic Compatibility (EMC), and RoHS
- Battery Safety Certifications – If the inflator pump contains lithium batteries, relevant certifications may include UN38.3 transport testing, IEC 62133 battery safety, and UL listings
- FCC Certification – For electromagnetic emissions compliance if the product is marketed in the United States
- Product Safety Testing – General product safety standards such as IEC 60335 for household electrical appliances or relevant pump-specific safety standards
- IP Rating Documentation – Ingress protection ratings (IEC 60529) if the product claims water or dust resistance
Obtaining multiple compliance certifications demonstrates commitment to product safety, environmental responsibility, and market access across different regulatory regions.
Document Pages
