Document Overview
Document Overview This document is a CE Electromagnetic Compatibility (EMC) Certification issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited third-party testing laboratory. The certificate confirms that the product identified below has been evaluated against the applicable harmonised European standards and found to…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This document is a CE Electromagnetic Compatibility (EMC) Certification issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited third-party testing laboratory. The certificate confirms that the product identified below has been evaluated against the applicable harmonised European standards and found to comply with the essential requirements of the EU EMC Directive 2014/30/EU.
- Registration Number: WTH25H07183677
- Reference Number: WTH25H07183677E
- Document Type: CE-EMC Compliance Certificate
- Issuing Body: Waltek Testing Group HCT (Shenzhen) Co., Ltd.
- Issue Date: July 25, 2025
- Scope: Electromagnetic compatibility — emission, immunity, harmonic current limits, and voltage fluctuation limits for the S6 inflator pump
Product Information
The certified product is the ETENWOLF Vortex S6 Heavy Duty Cordless Inflator, a portable inflator pump designed for heavy-duty cordless inflation tasks. Below are the full product and applicant details as recorded in the certificate.
| Field | Details |
|---|---|
| Product Name | Inflator Pump |
| Model | S6 |
| Trade Mark | N/A |
| Applicant / Holder | Guangdong Bestek Technology Co., LTD |
| Manufacturer | Guangdong Bestek Technology Co., LTD |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Input Rating | Type-C PD3.0 PD45W: DC 5V/3A, DC 9V/3A, DC 12V/3A, DC 15V/3A, DC 20V/2.25A |
| Output Rating (Type-C) | Type-C PD3.0 PD45W: DC 5V/3A, DC 9V/3A, DC 12V/3A, DC 15V/3A, DC 20V/2.25A |
| Output Rating (USB-A) | DC 5V/2.4A |
Key Details
The ETENWOLF Vortex S6 was subjected to a full suite of EMC tests covering both conducted and radiated emissions as well as immunity performance. The table below summarises the test standards applied and the compliance outcome.
| Standard | Scope | Result |
|---|---|---|
| EN IEC 55014-1: 2021 | EMC — Emission requirements for household appliances, electric tools and similar apparatus (CISPR 14-1:2016 + COR1:2016) | Pass |
| EN IEC 55014-2: 2021 | EMC — Immunity requirements for household appliances, electric tools and similar apparatus — Product family standard (CISPR 14-2:2015) | Pass |
| EN IEC 61000-3-2: 2019+A1:2021 | EMC — Limits for harmonic current emissions (equipment input current ≤16 A per phase) | Pass |
| EN 61000-3-3: 2013+A2:2021 | EMC — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems (rated current ≤16 A per phase, not subject to conditional connection) | Pass |
The test results confirm full compliance with the essential EMC requirements. The certificate authorises the affixing of the CE marking on the equipment following preparation of the required technical documentation and Declaration of Conformity.
Standards & Compliance
The ETENWOLF Vortex S6 was tested against the following harmonised European standards, each of which provides a presumption of conformity with the essential requirements of the EU EMC Directive 2014/30/EU.
- EN IEC 55014-1: 2021 — Electromagnetic compatibility: Requirements for household appliances, electric tools and similar apparatus. Part 1: Emission. Based on CISPR 14-1:2016 + COR1:2016. This standard defines limits and test methods for radio-frequency disturbances generated by the product.
- EN IEC 55014-2: 2021 — Electromagnetic compatibility: Requirements for household appliances, electric tools and similar apparatus. Part 2: Immunity — Product family standard. Based on CISPR 14-2:2015. This standard specifies immunity requirements to ensure the product operates correctly in the presence of electromagnetic disturbances.
- EN IEC 61000-3-2: 2019+A1:2021 — Electromagnetic compatibility (EMC). Part 3-2: Limits for harmonic current emissions for equipment with input current up to and including 16 A per phase. This ensures the product does not inject excessive harmonic currents into the public power supply network.
- EN 61000-3-3: 2013+A2:2021 — Electromagnetic compatibility (EMC). Part 3-3: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤16 A per phase and not subject to conditional connection.
Compliance with these standards satisfies the EMC essential requirements under EU Directive 2014/30/EU. Other applicable EU Directives must also be observed where relevant.
Validity & Certification Body
The certificate was issued on July 25, 2025, and is signed by Tony Wu, General Manager of Waltek Testing Group HCT (Shenzhen) Co., Ltd. The statement is based on a single evaluation of the product sample; it does not constitute an assessment of the entire production run.
| Field | Details |
|---|---|
| Certificate Issue Date | July 25, 2025 |
| Signatory | Tony Wu, General Manager |
| Testing Laboratory | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Laboratory Tel | 0755-84616666 |
| Service Tel | 400-0066-989 |
| Laboratory Email | [email protected] |
| Directive | EU EMC Directive 2014/30/EU |
| Validity Note | Based on sample evaluation; does not imply assessment of whole production |
Following this certification, the manufacturer may affix the CE marking to the equipment after completing the required technical documentation and issuing a Declaration of Conformity in accordance with the EMC Directive.
Frequently Asked Questions
- What does the CE-EMC certificate WTH25H07183677E confirm for the ETENWOLF Vortex S6?
- Certificate WTH25H07183677E confirms that the ETENWOLF Vortex S6 has been independently tested by Waltek Testing Group HCT (Shenzhen) Co., Ltd. and found compliant with EU EMC Directive 2014/30/EU. It passed all four applicable harmonised standards covering emission, immunity, harmonic current limits, and voltage fluctuation limits.
- Which EU Directive applies to this CE-EMC certification?
- The applicable directive is EU EMC Directive 2014/30/EU. This directive establishes essential requirements for electromagnetic compatibility of electrical and electronic equipment placed on the European market.
- Does CE-EMC certification mean the ETENWOLF Vortex S6 is safe for use in Europe?
- CE-EMC compliance confirms the product meets electromagnetic compatibility requirements under EU Directive 2014/30/EU. For full market access in Europe, additional directives may apply depending on the product category — for example, the Low Voltage Directive or Battery Directive. The certificate itself notes that other relevant directives must also be observed.
- What is the significance of the EN IEC 55014 series for an inflator pump?
- The EN IEC 55014 series specifically covers household appliances and electric tools, making it the directly relevant product family standard for the ETENWOLF Vortex S6 inflator. Part 1 addresses radio-frequency emissions from the device, while Part 2 addresses the device’s ability to operate correctly when exposed to external electromagnetic disturbances.
Related Documents
The following certification types are relevant for a cordless inflator pump such as the ETENWOLF Vortex S6 and complement this CE-EMC certificate:
- CE-LVD (Low Voltage Directive 2014/35/EU) — Covers electrical safety requirements for equipment operating within the specified voltage ranges. Typically tested against EN IEC 62368-1 or EN IEC 60335 series.
- CE-RED (Radio Equipment Directive 2014/53/EU) — Applicable if the product incorporates any wireless communication functions such as Bluetooth or Wi-Fi.
- UN 38.3 Battery Transport Test Report — Required for the lithium-ion battery pack powering the cordless inflator, confirming safe transport under international regulations.
- RoHS Compliance Certificate — Confirms restriction of hazardous substances in electrical and electronic equipment under EU Directive 2011/65/EU.
- REACH Compliance Declaration — Addresses the presence of Substances of Very High Concern (SVHCs) under the EU REACH Regulation (EC) No 1907/2006.
- FCC Part 15 Certificate — Required for sale in the United States market, covering unintentional electromagnetic emissions from digital devices.
Document Pages
