ETENWOLF S5C Inflator Pump CE-LVD Test Report | WTH25X07183673J

Document Overview

Document Overview This page presents the CE Low Voltage Directive (CE-LVD) test report for the ETENWOLF S5C inflator pump, issued by Waltek Testing Group (Shenzhen) Co., Ltd. The report covers safety and electromagnetic field evaluation in accordance with applicable EU harmonised standards for household and…

Document type
Certification Report
Prepared by
Michelle Torres
Published
Last reviewed
Topics
European Union: CE / RoHS / REACH / WEEE

Document Overview

This page presents the CE Low Voltage Directive (CE-LVD) test report for the ETENWOLF S5C inflator pump, issued by Waltek Testing Group (Shenzhen) Co., Ltd. The report covers safety and electromagnetic field evaluation in accordance with applicable EU harmonised standards for household and similar electrical appliances.

Field Detail
Document Type CE-LVD Test Report
Reference Number WTH25X07183673J
Test Report Form No. WTX_EN IEC 60335_1_2023B
Issuing Body Waltek Testing Group (Shenzhen) Co., Ltd.
Date of Receipt of Sample 2025-07-14
Date of Test 2025-07-14 to 2025-07-26
Date of Issue 2025-07-27
Overall Test Result Pass

The test report is valid only for the sample(s) tested. It may not be reproduced in part without prior written permission from Waltek Testing Group. The report is invalid without the specific stamp of the test institute and the signatures of the approver.

Product Information

The ETENWOLF S5C inflator pump is a portable inflation tool intended for household and indoor use only. It is classified as a Class III appliance powered via a DC connector, with no mains supply connection.

Attribute Detail
Product Name Inflator Pump
Model Number S5C
Applicant Guangdong Bestek Technology Co., Ltd.
Manufacturer Guangdong Bestek Technology Co., Ltd.
Manufacturer Address No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China
Country of Origin Made in China
Supply Connection DC Connector
Equipment Class Class III
Installation & Use Portable appliance, indoor use only
Water Ingress Protection IPX0 (no special protection)

The rated input covers multiple voltage and current combinations as detailed below:

  • 5 V / 3 A
  • 9 V / 3 A
  • 12 V / 2.5 A
  • 15 V / 2 A
  • 20 V / 1.5 A

Note: LED lights integrated into the product are not evaluated within the scope of this report.

Key Details

The following table summarises the key clause-level test verdicts recorded during the evaluation of the S5C inflator pump against EN IEC 60335-1:2023+A11:2023.

Clause Requirement / Test Area Verdict
5 General Conditions for the Tests Pass
6 Classification Pass
6.1 Protection Against Electric Shock — Class III Pass
6.2 Protection Against Harmful Ingress of Water — IPX0 N/A
7 Marking and Instructions Pass
7.1 Rated Voltage / Current / Manufacturer Identification on Label Pass
7.1 Class III Symbol (battery-powered appliance exemption applies) Pass

Additional label requirements for EU market placement:

  • Minimum CE mark height: 5 mm
  • Minimum WEEE mark height: 7 mm
  • Name and address of the importer must be affixed on the product when placed on the EU market
  • No subcontracting of test items to other laboratories was declared

The test verdicts use the following notation throughout the report: P = Pass, F = Fail, N/A = Not Applicable.

Standards & Compliance

The S5C inflator pump was evaluated against the following harmonised European standards as part of the CE-LVD certification process:

Standard Title Scope
EN IEC 60335-1:2023+A11:2023 Household and Similar Electrical Appliances — Safety — Part 1: General Requirements Primary safety standard covering construction, marking, protection against electric shock, mechanical hazards, and thermal safety for household appliances
EN 62233:2008 Measurement Methods for Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human Exposure Defines measurement methods for electromagnetic fields (EMF) to assess human exposure from household and similar appliances

Both standards are harmonised under the EU Low Voltage Directive (LVD) 2014/35/EU and the EU EMF Directive 2013/35/EU. Compliance with these standards supports the affixing of the CE marking on the product for EU market placement.

Validity & Certification Body

The test report was prepared and issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory based in China. Full issuing body details are as follows:

Field Detail
Laboratory Name Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Website http://www.waltek.com.cn
Address 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
Telephone +86-755-33663308
Fax +86-755-33663309
Email [email protected]
Prepared By John Zhong, Project Engineer
Approved By Harvid Wei, Manager
Report Total Pages 129 pages

The report reference number WTH25X07183673J was issued on 2025-07-27. The test results are valid exclusively for the sample(s) tested during the period 2025-07-14 to 2025-07-26. Any design or manufacturing change to the product may require re-evaluation. The report is invalid without the official stamp of Waltek Testing Group and the authorised signatures of the preparer and approver.

Frequently Asked Questions

What does the CE-LVD certification mean for the S5C inflator pump?

CE-LVD (Low Voltage Directive) certification means the ETENWOLF S5C inflator pump has been independently tested and found to comply with EU safety requirements for electrical appliances, specifically EN IEC 60335-1:2023+A11:2023. It confirms the product meets essential health and safety requirements needed for legal sale in the European Economic Area.

Which test standards were applied to the S5C and why?

Two standards were applied: EN IEC 60335-1:2023+A11:2023 for general electrical safety of household appliances, and EN 62233:2008 for measuring electromagnetic field exposure. Both are required for CE marking under the LVD and EMF Directives for this product category.

What is the equipment class of the S5C and why does it matter?

The S5C is classified as a Class III appliance, meaning it operates on safety extra-low voltage (SELV) supplied via a DC connector. Class III classification eliminates the risk of electric shock from mains voltage contact, making it a safer category of appliance for end users.

Are the LED lights on the S5C covered by this test report?

No. The test report explicitly states that LED lights integrated into the S5C inflator pump are not evaluated within this report’s scope. A separate evaluation may be required for LED-specific compliance depending on the target market requirements.

Related Documents

For a complete compliance picture for the ETENWOLF S5C inflator pump, the following related certification and compliance documents are recommended:

  • CE-EMC Test Report — Electromagnetic Compatibility testing under Directive 2014/30/EU, typically covering EN 55014-1 and EN 55014-2 for household appliances
  • CE Declaration of Conformity (DoC) — The manufacturer’s formal declaration referencing all applicable EU Directives and harmonised standards, required for EU market placement
  • UN 38.3 Battery Safety Report — If the S5C includes an integrated rechargeable battery, UN 38.3 transport testing is required for air and ground shipping compliance
  • RoHS Compliance Report — Restriction of Hazardous Substances testing confirming the product is free from restricted substances under EU Directive 2011/65/EU
  • REACH SVHC Declaration — Confirms the product does not contain Substances of Very High Concern above threshold limits under EU REACH Regulation (EC) No 1907/2006
  • FCC / KC Radio / EMC Certification — If the product is sold in the United States or South Korea, corresponding FCC or KC certification documents will be required

Document Pages

Document Page 1
Document Page 2
Document Page 3
Document Page 4
Document Page 5
Document Page 6
Document Page 7
Document Page 8
Document Page 9
Document Page 10
Document Page 11
Document Page 12
Document Page 13
Document Page 14
Document Page 15
Document Page 16
Document Page 17
Document Page 18
Document Page 19
Document Page 20
Document Page 21
Document Page 22
Document Page 23
Document Page 24
Document Page 25
Document Page 26
Document Page 27
Document Page 28
Document Page 29
Document Page 30
Document Page 31
Document Page 32
Document Page 33
Document Page 34
Document Page 35
Document Page 36
Document Page 37
Document Page 38
Document Page 39
Document Page 40
Document Page 41
Document Page 42
Document Page 43
Document Page 44
Document Page 45
Document Page 46
Document Page 47
Document Page 48
Document Page 49
Document Page 50
Document Page 51
Document Page 52
Document Page 53
Document Page 54
Document Page 55
Document Page 56
Document Page 57
Document Page 58
Document Page 59
Document Page 60
Document Page 61
Document Page 62
Document Page 63
Document Page 64
Document Page 65
Document Page 66
Document Page 67
Document Page 68
Document Page 69
Document Page 70
Document Page 71
Document Page 72
Document Page 73
Document Page 74
Document Page 75
Document Page 76
Document Page 77
Document Page 78
Document Page 79
Document Page 80
Document Page 81
Document Page 82
Document Page 83
Document Page 84
Document Page 85
Document Page 86
Document Page 87
Document Page 88
Document Page 89
Document Page 90
Document Page 91
Document Page 92
Document Page 93
Document Page 94
Document Page 95
Document Page 96
Document Page 97
Document Page 98
Document Page 99
Document Page 100
Document Page 101
Document Page 102
Document Page 103
Document Page 104
Document Page 105
Document Page 106
Document Page 107
Document Page 108
Document Page 109
Document Page 110
Document Page 111
Document Page 112
Document Page 113
Document Page 114
Document Page 115
Document Page 116
Document Page 117
Document Page 118
Document Page 119
Document Page 120
Document Page 121
Document Page 122
Document Page 123
Document Page 124
Document Page 125
Document Page 126
Document Page 127
Document Page 128
Document Page 129