Document Overview
Document Overview This article covers the CE Low Voltage Directive (LVD) certification document issued for the ETENWOLF S1 portable tire inflator. The certification was conducted under the framework of EU LVD Directive 2014/35/EU, which establishes essential safety requirements for electrical equipment operating within certain voltage…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This article covers the CE Low Voltage Directive (LVD) certification document issued for the ETENWOLF S1 portable tire inflator. The certification was conducted under the framework of EU LVD Directive 2014/35/EU, which establishes essential safety requirements for electrical equipment operating within certain voltage limits.
The issuing body is Waltek Testing Group (Shenzhen) Co., Ltd., an accredited independent testing laboratory. The certification document is dated January 5, 2026, and applies to the tire pump product under model designation S1.
- Registration No.: WTH25X12333146
- Reference No.: WTH25X12333146J
- Document Type: CE-LVD Compliance Verification
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Issue Date: 2026-01-05
- Applicable Directive: LVD 2014/35/EU
Product Information
The product certified in this document is the ETENWOLF S1, a compact portable tire inflator designed for household and similar use. It is manufactured and supplied by Guangdong Bestek Technology Co., Ltd., based in Heyuan City, Guangdong, China.
| Field | Details |
|---|---|
| Product Name | Tire Pump |
| Model No. | S1 |
| Trade Name | — |
| Rated Voltage | 5 V |
| Rated Current | 2.0 A |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The S1 operates at a low voltage of 5 V / 2.0 A, placing it squarely within the scope of the LVD directive and making CE marking applicable to this product category.
Key Details
The following table summarizes the core certification data extracted from the original compliance document for the ETENWOLF S1.
| Parameter | Value |
|---|---|
| Registration No. | WTH25X12333146 |
| Reference No. | WTH25X12333146J |
| Certification Type | CE – Low Voltage Directive (LVD) |
| Applicable EU Directive | LVD 2014/35/EU |
| Product Category | Household and similar electrical appliances |
| Rated Technical Data | 5 V, 2.0 A |
| Test Standards Applied | EN IEC 60335-1:2023+A11:2023; EN 62233:2008 |
| Compliance Result | Compliant |
| Certification Date | 2026-01-05 |
| Authorized Signatory | Jandy So (Manager, Waltek Testing Group) |
The test report(s) referenced within this document confirm that the S1 meets all essential safety requirements under the LVD directive. Following preparation of the required technical documentation and EU Declaration of Conformity (DoC), the CE marking may be affixed to the product under the sole responsibility of the manufacturer.
Note: The compliance assessment is based on one or several specimens of the product and does not constitute an assessment of the entire production batch.
Standards & Compliance
The ETENWOLF S1 was tested against the following harmonized European standards, which provide presumption of conformity with the essential requirements of EU LVD Directive 2014/35/EU:
| Standard | Title | Scope |
|---|---|---|
| EN IEC 60335-1:2023+A11:2023 | Household and similar electrical appliances – Safety – Part 1: General requirements | Defines general safety requirements for household and similar electrical appliances with rated voltage up to 250 V for single-phase and 480 V for other appliances. |
| EN 62233:2008 | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure | Specifies measurement methods to evaluate human exposure to electromagnetic fields generated by household electrical appliances. |
Compliance with these harmonized standards under the CE LVD Directive 2014/35/EU ensures that the product meets the fundamental safety objectives required for lawful sale and distribution within the European Economic Area (EEA). The CE marking on the product communicates this conformity to end users and market authorities.
Validity & Certification Body
The CE-LVD compliance verification for the ETENWOLF S1 was issued on January 5, 2026. As is standard for CE compliance verifications of this type, the validity is subject to the continued compliance of the product with the applicable standards and directive requirements. Any significant design change to the product would necessitate re-testing and re-issuance.
The certification was issued by Waltek Testing Group (Shenzhen) Co., Ltd., a recognized independent testing and certification laboratory operating under the Waltek registered trademark.
| Field | Details |
|---|---|
| Laboratory Name | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Website | http://www.waltek.com.cn |
| Telephone | +86-755-3366 3308 |
| Fax | +86-755-3366 3309 |
| [email protected] | |
| Authorized Signatory | Jandy So, Manager |
| Document Version | Ver.08.25 |
| Issue Date | 2026-01-05 |
Waltek Testing Group uses the WALTEK registered trademark. Reproduction or utilization of this verification document requires prior approval from Waltek. Integral publication of this verification together with its adjoining test reports is permitted.
Frequently Asked Questions
- What does the CE-LVD certification mean for the ETENWOLF S1?
-
CE-LVD certification confirms that the ETENWOLF S1 portable tire inflator has been tested and found to comply with the EU Low Voltage Directive 2014/35/EU. This means the product meets essential electrical safety requirements and is authorized to bear the CE marking, allowing it to be legally sold throughout the European Economic Area (EEA).
- Which test standards were used to certify the ETENWOLF S1?
-
The S1 was tested against two harmonized European standards: EN IEC 60335-1:2023+A11:2023 (general safety requirements for household electrical appliances) and EN 62233:2008 (measurement of electromagnetic fields with regard to human exposure). Both standards are recognized as providing presumption of conformity with LVD 2014/35/EU.
- Who issued the CE-LVD certificate for the S1 and when?
-
The CE-LVD compliance verification (Registration No. WTH25X12333146) was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on January 5, 2026, and was signed by Manager Jandy So. Waltek is an accredited independent testing laboratory based in Shenzhen, China.
- Does CE-LVD certification cover the entire production of the S1?
-
No. The compliance assessment is based on one or several specimens of the ETENWOLF S1 submitted for testing and does not imply conformity assessment of the whole production. The manufacturer retains sole responsibility for ensuring that all units placed on the market conform to the tested specification and the applicable EU directive requirements.
Related Documents
For a complete compliance picture of the ETENWOLF S1 portable tire inflator, the following related certification documents are relevant and may be available:
- CE-EMC Certificate – Electromagnetic Compatibility testing under Directive 2014/30/EU, complementing the LVD certification for full CE marking compliance.
- EU Declaration of Conformity (DoC) – The manufacturer’s formal declaration that the S1 meets all applicable EU directives, required before CE marking can be affixed.
- RoHS Compliance Certificate – Confirms the S1 complies with EU RoHS Directive 2011/65/EU restricting hazardous substances in electrical and electronic equipment.
- UN 38.3 Battery Test Report – If the S1 incorporates a lithium battery, a UN 38.3 transport test report is required for safe shipping classification.
- FCC Declaration of Conformity – Required for sale in the United States market, covering radio frequency emissions compliance under FCC regulations.
- KC Certification – Required for sale in South Korea, covering electrical safety and EMC requirements under KC marking regulations.
Document Pages
