Document Overview
Document Overview This page presents the Identification and Classification Report for Transport of Goods issued under the IMDG CODE (Amendment 42-24) and the UN Manual of Tests and Criteria, Part III, Sub-section 38.3 (ST/SG/AC.10/11/Rev.8). The report was issued by Beijing DGM Air Transport Technology Development…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- International Transportation: CB / MSDS / UN38.3
Document Overview
This page presents the Identification and Classification Report for Transport of Goods issued under the IMDG CODE (Amendment 42-24) and the UN Manual of Tests and Criteria, Part III, Sub-section 38.3 (ST/SG/AC.10/11/Rev.8). The report was issued by Beijing DGM Air Transport Technology Development Co., Ltd. (DGM China), a recognized dangerous-goods identification authority.
| Field | Detail |
|---|---|
| Issued Number | SEKSZ202601290283ZP520001 |
| Identification Date | 2026-01-29 |
| Issuing Body | Beijing DGM Air Transport Technology Development Co., Ltd. |
| Applicable Regulation | IMDG CODE (Amdt 42-24), UN38.3 (ST/SG/AC.10/11/Rev.8) |
| Classification Result | Not Subject to These Regulations (Not Restricted) |
| Identification Purpose | Determination of dangerous goods or not-restricted status |
The document confirms that the product is exempt from dangerous-goods transport restrictions when the conditions of IMDG CODE Special Provision 188 are fully observed. This report is valid within the year of issuance and is only binding when signed by the inspector, checker, and approver, and stamped by DGM China.
Product Information
The product covered by this report is the ETENWOLF X5 PRO Jump Starter with Air Compressor, manufactured by Guangdong Bestek Technology Co., Ltd. It combines a lithium-ion battery pack with a built-in air compressor capable of reaching a maximum working pressure of 160 PSI / 11.0 Bar.
| Specification | Value |
|---|---|
| Product Model | X5 PRO |
| Product Name | Jump Starter with Air Compressor |
| Battery Chemistry | Lithium-Ion (Li-ion) |
| Nominal Voltage | 14.8 V |
| Rated Capacity | 1500 mAh |
| Watt-Hour Rating | 22.2 Wh |
| Dimensions | 168.0 × 114.7 × 67.4 mm |
| Gross Weight per Package | 14.8 kg (10 units per package) |
| Unit Mass | 824.8 g |
| Appearance | Black, almost cuboid |
| Max. Working Pressure | 160 PSI / 11.0 Bar |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Support Phone | (+1) 866-720-9226 |
| Support Email | [email protected] |
Key Details
The following section summarises the core findings of the classification report for the X5 PRO, including UN38.3 test results, packaging requirements, and transport conditions.
UN38.3 Test Summary
| Test | Test Code | Result |
|---|---|---|
| Altitude Simulation | T1 | Pass |
| Thermal Test | T2 | Pass |
| Vibration | T3 | Pass |
| Shock | T4 | Pass |
| External Short Circuit | T5 | Pass |
| Impact / Crush | T6 | Pass |
| Overcharge | T7 | Pass |
| Forced Discharge | T8 | Pass |
Test Report Reference
| Field | Detail |
|---|---|
| Test Report Number | WTH25D12334288B |
| Date of Test Report | 2026-01-14 |
| Edition of UN Manual Used | ST/SG/AC.10/11/Rev.8, Sub-section 38.3 |
| Testing Laboratory | Waltek Testing Group Co., Ltd. |
| Lab Address | No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China |
| Lab Tel | +86-769-2267 6998 |
| Lab Email | [email protected] |
| Lab Website | www.waltek.com.cn |
Transport and Packaging Conditions
- The watt-hour rating of 22.2 Wh is below the 100 Wh threshold, qualifying the battery as not restricted under IMDG CODE Special Provision 188.
- Each package must withstand a 1.2 m drop test in any orientation.
- Batteries must be individually packed to prevent short circuits under normal transport conditions and placed in strong outer packagings.
- Each consignment must be accompanied by a document stating: the package contains lithium-ion batteries; the package must be handled with care; a flammability hazard exists if the package is damaged; special procedures must be followed in the event of damage, including inspection and repacking if necessary; and a telephone number for additional information must be provided.
- Packages must be appropriately marked in accordance with IMDG CODE Special Provision 188.
- These batteries are not being returned to the manufacturer for safety reasons, are not waste lithium batteries, and are not being shipped for recycling or disposal.
- Batteries are manufactured under a quality management programme.
Standards & Compliance
The X5 PRO battery has been evaluated against internationally recognised transport safety standards. All applicable tests were conducted by Waltek Testing Group Co., Ltd.
| Standard / Regulation | Scope | Result |
|---|---|---|
| UN38.3 (ST/SG/AC.10/11/Rev.8) | Lithium battery transport safety testing (T1–T8) | All tests passed |
| IMDG CODE (Amdt 42-24) | International Maritime Dangerous Goods Code — sea transport classification | Not Restricted, per Special Provision 188 |
Per UN38.3.3.1(f) and UN38.3.3.1(g) (and their respective equivalents UN38.3.3.2(d) and UN38.3.3.2(e)), the battery type has been proved to meet all required test criteria. The UN number, hazard class, and packing group fields are marked as not applicable (“/”) because the product is classified as non-restricted.
Validity & Certification Body
Report Validity
This identification and classification report is valid for one year from the date of issuance (2026-01-29). The report is rendered invalid in the event of illegal transfer, reproduction, embezzlement, impersonation, modification, or tampering in any media form. Reproduction without written approval from DGM China is prohibited.
Issuing Authority — DGM China
| Field | Detail |
|---|---|
| Full Name | Beijing DGM Air Transport Technology Development Co., Ltd. |
| Address | 249, Haisa Building, Beijing 101300, P.R. China |
| Tel | 010-69479673 |
| Fax | 010-69479621 |
| Website | www.dgmchina.com.cn |
| [email protected] |
Testing Laboratory — Waltek Testing Group
| Field | Detail |
|---|---|
| Full Name | Waltek Testing Group Co., Ltd. |
| Address | No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China |
| Tel | +86-769-2267 6998 |
| [email protected] | |
| Website | www.waltek.com.cn |
Frequently Asked Questions
- Is the ETENWOLF X5 PRO battery classified as dangerous goods for sea transport?
-
No. The X5 PRO battery has a watt-hour rating of 22.2 Wh, which is well below the 100 Wh threshold defined in IMDG CODE Special Provision 188. As confirmed by DGM China in report SEKSZ202601290283ZP520001, the product is classified as “Not Subject to These Regulations” for sea transport, provided all packaging and documentation conditions are met.
- Which UN38.3 tests did the X5 PRO battery pass?
-
The battery passed all eight mandatory tests: T1 Altitude Simulation, T2 Thermal Test, T3 Vibration, T4 Shock, T5 External Short Circuit, T6 Impact/Crush, T7 Overcharge, and T8 Forced Discharge. Testing was conducted by Waltek Testing Group Co., Ltd. under test report number WTH25D12334288B, dated 2026-01-14.
- What packaging and documentation requirements apply when shipping the X5 PRO?
-
Each unit must be individually packed to prevent short circuits and placed in a strong outer packaging capable of passing a 1.2 m drop test. Every shipment must include a document stating that the package contains lithium-ion batteries, that it must be handled with care, that a flammability hazard exists if damaged, and that a telephone number for additional information is provided. Packages must also carry the markings required by IMDG CODE Special Provision 188.
- How long is the UN38.3 classification report valid for the X5 PRO?
-
The report issued by DGM China (No. SEKSZ202601290283ZP520001, issued 2026-01-29) is valid for one year from its issue date. The report becomes invalid if it is transferred, reproduced, or modified without written authorisation from DGM China.
Related Documents
The following certification and compliance documents are relevant to the X5 PRO Jump Starter with Air Compressor and are recommended to support global market access and regulatory requirements.
- UN38.3 Air Transport Summary — A separate UN38.3 summary specifically for air freight (IATA DGR), covering the same battery cell type under ICAO/IATA dangerous-goods regulations.
- CE Declaration of Conformity — Required for sale in the European Economic Area, covering Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC) under CE marking requirements.
- FCC Declaration of Conformity — Required for sale in the United States under FCC Part 15 rules, covering radio frequency emissions of any wireless or electronic components.
- RoHS Compliance Certificate — Confirms restriction of hazardous substances in electrical and electronic equipment per RoHS Directive 2011/65/EU.
- REACH SVHC Declaration — Confirms the product does not contain substances of very high concern above threshold levels per REACH Regulation (EC) No 1907/2006.
- IEC 62133 Battery Safety Test Report — Covers secondary lithium-ion cell and battery safety per IEC 62133-2, required for many retail and e-commerce platform listings.
- KC Certification — Required for sale in South Korea, covering electrical safety and EMC under KC marking requirements administered by the Korea Agency for Technology and Standards.
- MSDS / Safety Data Sheet — Material Safety Data Sheet for the lithium-ion battery pack, required by many freight forwarders and carriers as supporting documentation alongside the UN38.3 report.
Document Pages
