CE-LVD Certification for ETENWOLF C2 Wireless Portable Tire Pump – Waltek Verification

Document Overview

Document Overview This document is a CE Low Voltage Directive (LVD) Verification Statement issued by Waltek Testing Group (Shenzhen) Co., Ltd., a recognized third-party testing laboratory. The verification confirms that the product complies with the requirements of EU Directive LVD 2014/35/EU. Registration No.: WTH25X09239215 Reference…

Document type
Certification Report
Prepared by
Michelle Torres
Published
Last reviewed
Topics
European Union: CE / RoHS / REACH / WEEE

Document Overview

This document is a CE Low Voltage Directive (LVD) Verification Statement issued by Waltek Testing Group (Shenzhen) Co., Ltd., a recognized third-party testing laboratory. The verification confirms that the product complies with the requirements of EU Directive LVD 2014/35/EU.

  • Registration No.: WTH25X09239215
  • Reference No.: WTH25X09239215J
  • Document Type: CE-LVD Verification Statement
  • Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
  • Issue Date: 2025-09-25
  • Scope: Compliance verification for a wireless portable tire pump against applicable EU harmonised standards under the Low Voltage Directive

Product Information

The certified product is the ETENWOLF C2 Wireless Portable Tire Pump, manufactured by Guangdong Bestek Technology Co., Ltd. The device is a battery-powered, cordless inflation tool designed for household and similar use cases.

Field Details
Product Name Wireless Portable Tire Pump
Model No. C2
Trade Name
Rated Input 5 V, 2.0 A
Applicant Guangdong Bestek Technology Co., LTD
Manufacturer Guangdong Bestek Technology Co., LTD
Manufacturer Address No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China

Key Details

The C2 was tested against the listed harmonised standards and found to be in full compliance. The verification statement is based on one or several representative specimens of the product and does not constitute an assessment of the entire production line. After preparation of the required technical documentation and the EU Declaration of Conformity, the CE marking may be affixed to the product under the sole responsibility of the manufacturer.

Item Value
Registration No. WTH25X09239215
Reference No. WTH25X09239215J
Applicable EU Directive LVD 2014/35/EU
Rated Voltage / Current 5 V / 2.0 A
Test Specimen Basis Single or multiple specimens; not a full production assessment
CE Marking Responsibility Manufacturer (Guangdong Bestek Technology Co., LTD)
Authorised Signatory Jandy So, Manager
Statement Date 2025-09-25

Standards & Compliance

The ETENWOLF C2 was evaluated against the following harmonised European standards, which provide presumption of conformity with the essential requirements of EU Directive LVD 2014/35/EU:

Standard Title
EN IEC 60335-1:2023+A11:2023 Household and similar electrical appliances – Safety – Part 1: General requirements
EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure

These standards are recognised under EU harmonisation legislation as establishing the technical baseline for product safety and electromagnetic field measurement compliance in consumer electrical appliances.

Validity & Certification Body

The verification statement was issued on 2025-09-25 and signed by Jandy So, Manager at Waltek Testing Group (Shenzhen) Co., Ltd. No explicit expiry date is stated in the document; however, CE-LVD compliance should be re-evaluated if the product design, materials, or applicable standards are revised.

  • Testing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
  • Website: www.waltek.com.cn
  • Tel: +86-755-3366 3308
  • Fax: +86-755-3366 3309
  • Email: [email protected]
  • Trademark Notice: WALTEK is a registered trademark. Use of the verification statement requires prior approval. Integral publication of the verification and adjoining reports is permitted.

Frequently Asked Questions

What does CE-LVD certification mean for the ETENWOLF C2?

CE-LVD certification confirms that the ETENWOLF C2 Wireless Portable Tire Pump has been tested and verified to meet the essential safety requirements of EU Low Voltage Directive 2014/35/EU. This allows the product to be legally placed on the European market and carry the CE marking.

Which standards were used to test the C2 tire pump?

The C2 was tested against EN IEC 60335-1:2023+A11:2023, covering general safety requirements for household electrical appliances, and EN 62233:2008, which covers electromagnetic field measurement with respect to human exposure.

Who issued the CE-LVD verification for the C2?

The verification was issued by Waltek Testing Group (Shenzhen) Co., Ltd., a third-party testing laboratory. The statement carries Registration No. WTH25X09239215 and was signed by Manager Jandy So on 2025-09-25.

Does this certificate cover the entire production run of the C2?

No. As stated in the verification document, the test results are based on one or several representative specimens. They do not constitute an assessment of the entire production. The manufacturer remains solely responsible for ensuring ongoing conformity and affixing the CE marking.

Related Documents

For a complete compliance picture of the ETENWOLF C2 Wireless Portable Tire Pump, the following related certification and compliance documents are recommended:

  • CE-EMC Certificate – Electromagnetic Compatibility compliance under EU Directive 2014/30/EU
  • CE-RED Certificate – Radio Equipment Directive compliance (if the device includes wireless communication features)
  • EU Declaration of Conformity (DoC) – Manufacturer’s self-declaration covering all applicable CE directives
  • RoHS Compliance Report – Restriction of hazardous substances verification under EU Directive 2011/65/EU
  • REACH Statement – Declaration confirming compliance with REACH regulation (EC) No 1907/2006 on chemical substances
  • UN38.3 Test Report – Battery transport safety certification if the product includes a lithium battery pack

Document Pages

Document Page 1