What does REACH SVHC compliance mean for the S5C inflator pump?

REACH SVHC compliance means that none of the 252 currently listed Substances of Very High Concern were detected above the 0.1% w/w threshold in any component of the S5C inflator pump. This confirms the product can be placed on the EU market without SVHC communication obligations under REACH Regulation (EC) No 1907/2006.

Which substances were tested in Report WTH25X07183752C?

Report WTH25X07183752C tested for all 250 confirmed SVHC substances plus 2 potential substances listed on the ECHA Candidate List as of the testing date (July–August 2025). All homogeneous material groups from the S5C — metals, plastics, rubbers, PCB components, wire jackets, and solder — were individually analysed.

What does 'ND' mean in the REACH SVHC test results?

ND stands for Not Detected, meaning the concentration of the tested substance is below the reporting limit of 0.1% weight by weight (w/w). An ND result across all groups confirms the product does not require SVHC disclosure under REACH Article 33.

Does the REACH SVHC test report expire and when should it be renewed?

REACH SVHC test reports do not have a mandated expiry date, but should be renewed whenever the ECHA Candidate List is updated with new substances, product materials change, or a new supplier is introduced. The ECHA typically updates the Candidate List twice a year, so manufacturers should monitor updates and retest as needed.

ETENWOLF S5C Inflator Pump – REACH SVHC Test Report WTH25X07183752C

Document Overview

Document Overview This page presents the findings of REACH Substances of Very High Concern (SVHC) Test Report WTH25X07183752C, issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-08-07. The report was prepared in accordance with European Commission Regulation (EC) No 1907/2006 (REACH) to determine whether…

Document type: Certification Report
Prepared by: Michelle Torres
Published: July 22, 2026
Last reviewed: July 22, 2026
Topics: European Union: CE / RoHS / REACH / WEEE

Document Overview

This page presents the findings of REACH Substances of Very High Concern (SVHC) Test Report WTH25X07183752C, issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-08-07. The report was prepared in accordance with European Commission Regulation (EC) No 1907/2006 (REACH) to determine whether the product contains any of the 250 Substances of Very High Concern (SVHC) plus 2 potential substances listed on the ECHA Candidate List.

The scope of this test covers all homogeneous material groups extracted from the submitted product sample, spanning both metallic and non-metallic components. The conclusion confirms that no SVHC substance was detected above the 0.1% (w/w) threshold in any of the ten tested groups.

Report Number: WTH25X07183752C
Document Type: REACH SVHC Test Report
Issuing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
Date of Issue: 2025-08-07
Regulatory Framework: EC Regulation 1907/2006 (REACH), ECHA Candidate List (252 substances)
Overall Conclusion: All substances Not Detected (ND) — concentrations below 0.1% w/w

Product Information

The tested product is the ETENWOLF S5C inflator pump, manufactured and supplied by Guangdong Bestek Technology Co., Ltd. The S5C is a portable electric inflation tool designed for inflating tires, sports equipment, and other inflatable items.

Field	Details
Sample Name	Inflator Pump
Model Number	S5C
Reference Model	NA
Brand	NA (marketed under ETENWOLF)
Applicant	Guangdong Bestek Technology Co., Ltd.
Applicant Address	No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China
Manufacturer	Guangdong Bestek Technology Co., Ltd.
Manufacturer Address	No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China
Date of Sample Receipt	2025-07-14 & 2025-07-29
Testing Period	2025-07-14 ~ 2025-07-21 & 2025-07-29 ~ 2025-08-04

Key Details

The laboratory dissected the S5C sample into individual homogeneous materials and organised them into ten test groups (T01–T10). Each group was analysed for all 252 listed SVHC substances. The table below summarises the group-level results, followed by a breakdown of representative materials within each group.

Summary Test Results

Group No.	Substances Tested	Result (%, w/w)	Reporting Limit (%, w/w)
T01	250 SVHC + 2 potential substances	ND	0.1
T02	250 SVHC + 2 potential substances	ND	0.1
T03	250 SVHC + 2 potential substances	ND	0.1
T04	250 SVHC + 2 potential substances	ND	0.1
T05	250 SVHC + 2 potential substances	ND	0.1
T06	250 SVHC + 2 potential substances	ND	0.1
T07	250 SVHC + 2 potential substances	ND	0.1
T08	250 SVHC + 2 potential substances	ND	0.1
T09	250 SVHC + 2 potential substances	ND	0.1
T10	250 SVHC + 2 potential substances	ND	0.1

Representative Material Breakdown by Group

Group	Material Category	Example Components
T01	Metal	Black cladding metal sheet, silvery metal sheets, silvery metal ring, black cladding metal screws (×7), gray cladding metal shells, silvery metal rod
T02	Metal	Silvery metal shell, dark metal gear, silvery metal ring, coppery metal coil, silvery metal stator, coppery metal rings, silvery metal axle, solder, golden metal sheet
T03	Metal	Silvery metal springs, coppery metals, silvery metal tube, solder, silvery metal shell, golden cladding metal PIN, silvery metal wire core
T04	Metal	Solder, silvery metal body, switch components (sheets, button, body, PIN), capacitor shell & PIN, coppery metal coil (inductance), black cladding metal spring
T05	Nonmetal	Orange plastic shell, gray plastic shell, black plastic shell, black rubber ×2, black plastic fan, beige plastic, gray magnet, yellow plastic gaskets, wire jackets (red/black)
T06	Nonmetal	Black rubber ×3, white plastic, wire jackets (black/red/white/blue), blue plastic film, black sponge, black thermistor body, black plastic film
T07	Nonmetal	Black cladding PCB board, yellow LED, and additional PCB-associated nonmetal components
T08–T10	Mixed	Additional metallic and nonmetal subcomponents (details in full report pages 8–38)

ND = Not Detected. All results are below the reporting limit of 0.1% (w/w), confirming compliance with the REACH SVHC concentration threshold for articles.

Standards & Compliance

The testing was conducted using a combination of in-house methods and internationally recognised analytical reference standards. The S5C inflator pump was evaluated against the full ECHA Candidate List of SVHC substances under REACH Regulation (EC) No 1907/2006.

Applicable Test Methods

Standard / Method	Scope
In-house method (Waltek)	Primary extraction and screening framework
EPA 3550C:2007	Ultrasonic extraction for semi-volatile organic compounds
US EPA 8270D:2018	GC/MS analysis of semi-volatile organic compounds
US EPA 3052:1996	Microwave-assisted acid digestion of siliceous and organically based matrices
US EPA 3050B:1996	Acid digestion of sediments, sludges, and soils
US EPA 6010D:2018	ICP-OES for elemental analysis
BS EN ISO 14362-1:2017	Azo colorants — determination of aromatic amines derived from azo colourants (Part 1)
BS EN ISO 14362-3:2017	Azo colorants — detection of aromatic amines in specific cases (Part 3)
ISO 17234-1:2020	Restricted azo colorants in leather
ISO 17234-2:2011	4-aminoazobenzene in leather
ISO 17353:2004	Organotin compounds in water
AfPS GS 2019:01 PAK	Polycyclic aromatic hydrocarbons (PAH) in consumer products

Regulatory Threshold

Under REACH Article 59, substances on the Candidate List present in articles at concentrations above 0.1% weight by weight (w/w) trigger communication and notification obligations. All 252 tested substances in the S5C were found below this threshold (Not Detected), confirming the product is fully compliant.

Validity & Certification Body

The test report was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing and certification laboratory based in Shenzhen, China. The report was signed on behalf of the laboratory by Hugo Chen.

Field	Details
Report Number	WTH25X07183752C
Date of Issue	2025-08-07
Testing Period	2025-07-14 ~ 2025-07-21 & 2025-07-29 ~ 2025-08-04
Sample Receipt Dates	2025-07-14 & 2025-07-29
Laboratory	Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Address	1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
Laboratory Website	http://www.waltek.com.cn
Laboratory Tel	+86-755-33663308
Laboratory Fax	+86-755-33663309
Laboratory Email	[email protected]
Signed By	Hugo Chen, Waltek Testing Group (Shenzhen) Co., Ltd.
Report Coverage	38 pages total

Note: REACH SVHC test reports do not carry a fixed expiry date in the same manner as type-approval certificates. However, reports should be reviewed whenever the ECHA Candidate List is updated or product materials change. The ECHA Candidate List is updated periodically; this report reflects the list as of the testing dates in July–August 2025, covering 252 substances (250 confirmed SVHC + 2 potential).

Frequently Asked Questions

What does REACH SVHC compliance mean for the S5C inflator pump?: REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) is a European Union regulation that controls the use of hazardous chemical substances. SVHC (Substances of Very High Concern) are chemicals identified as particularly harmful to human health or the environment. For the S5C, compliance means that none of the 252 currently listed SVHC substances were detected above the 0.1% w/w threshold in any component of the product, making it safe to place on the EU market without SVHC communication obligations.
Which substances were tested in Report WTH25X07183752C?: Report WTH25X07183752C tested for all 250 confirmed SVHC substances plus 2 potential substances listed on the ECHA Candidate List as of the testing date. The ECHA Candidate List is the official reference maintained at echa.europa.eu/candidate-list-table. Every homogeneous material group from the S5C — including metals, plastics, rubbers, PCB components, wire jackets, and solder — was individually analysed.
What does ‘ND’ mean in the test results?: ‘ND’ stands for Not Detected. It means that the concentration of the tested substance in that material group is below the method’s reporting limit, which in this case is 0.1% weight by weight (w/w). An ND result across all groups confirms the product does not require SVHC disclosure under REACH Article 33.
Does this report expire, and when should it be renewed?: REACH SVHC test reports do not have a mandated expiry date, but best practice is to renew testing whenever: (1) the ECHA Candidate List is updated with new substances, (2) the product’s materials or components change, or (3) a new supplier is introduced. Since the ECHA updates the Candidate List periodically (typically twice a year), manufacturers should monitor updates and commission retesting as needed to maintain current compliance documentation.