UN38.3 Test Summary Certificate – ETENWOLF X5PRO Jump Starter with Air Compressor

Document Overview

Document Overview This article presents the official UN38.3 Test Summary issued for the ETENWOLF X5PRO Jump Starter with Air Compressor. UN38.3 is the internationally recognised series of tests defined in the United Nations Manual of Tests and Criteria that lithium batteries must pass before they…

Document type
Certification Report
Prepared by
Michelle Torres
Published
Last reviewed
Topics
International Transportation: CB / MSDS / UN38.3

Document Overview

This article presents the official UN38.3 Test Summary issued for the ETENWOLF X5PRO Jump Starter with Air Compressor. UN38.3 is the internationally recognised series of tests defined in the United Nations Manual of Tests and Criteria that lithium batteries must pass before they can be transported safely by air, sea, or land.

  • Document Type: UN38.3 Test Summary (正本 / Original)
  • Unique Test Report ID: WTH25D12334288B
  • Issue Date: 2026-01-14
  • Reference Edition: UN Manual of Tests and Criteria, Revision 8
  • Issuing Laboratory: Waltek Testing Group Co., Ltd. (深圳沃特检验集团股份有限公司)
  • Signatory: 秦林伟 (Deval Qin), Designated Reviewer

Product Information

The X5PRO is a multi-function Jump Starter with integrated Air Compressor (多合一启充宝) manufactured under the ETENWOLF brand. It is designed for emergency vehicle jump-starting and tyre inflation, powered by a lithium-ion battery pack.

Attribute Detail
Model Number X5 PRO
Product Name Jump Starter with Air Compressor (多合一启充宝)
Battery Type Lithium Ion Battery
Rated Voltage 14.8 V
Rated Capacity 1500 mAh
Rated Energy 22.2 Wh
Physical Shape Almost Cuboid (近长方体)
Approximate Mass 824.8 g

Manufacturer: Guangdong Bestek Technology Co., Ltd. (广东贝仕达克科技有限公司), No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China. Tel: 0762-3429081. Email: [email protected].

Key Details

The following table lists every test conducted under UN38.3 Revision 8 and the corresponding result for the X5PRO battery pack.

Test Item UN38.3 Section Result
Altitude Simulation (高度模拟) T.1 Pass
Thermal Test (温度试验) T.2 Pass
Vibration (振动) T.3 Pass
Shock (冲击) T.4 Pass
External Short Circuit (外部短路) T.5 Pass
Impact / Crush (撞击 / 挤压) T.6 Pass
Overcharge (过充电) T.7 Pass
Forced Discharge (强制放电) T.8 Pass

All eight required UN38.3 test items were completed with a Pass result, confirming the battery is safe for transport under the applicable dangerous goods regulations.

Standards & Compliance

The testing was conducted in accordance with the requirements of the United Nations Recommendations on the Transport of Dangerous Goods — Manual of Tests and Criteria, Revision 8. This standard governs the safe transport classification of lithium metal and lithium-ion cells and batteries globally.

  • Standard Applied: UN38.3 (Rev. 8)
  • Battery Classification: Lithium Ion Battery
  • Transport Applicability: Air (IATA), Sea (IMDG), Road/Rail (ADR/RID)
  • Energy Threshold: 22.2 Wh — below the 100 Wh threshold for single battery transport exemptions
  • All test procedures follow the individual test method descriptions in sections T.1 through T.8 of the UN Manual of Tests and Criteria, Revision 8

Validity & Certification Body

The test summary was issued on 2026-01-14 and bears unique report identification number WTH25D12334288B. UN38.3 test reports do not carry a fixed expiry date but are valid as long as the product design and cell chemistry remain unchanged. Any modification to the battery design, chemistry, or rated parameters requires re-testing.

Testing Laboratory: Waltek Testing Group Co., Ltd. (深圳沃特检验集团股份有限公司)

  • Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China
  • Tel: +86-769-2267 6998
  • Email: [email protected]
  • Website: www.waltek.com.cn
  • Signatory: 秦林伟 (Deval Qin), Designated Reviewer
  • Document Pages: Page 1 of 1

Frequently Asked Questions

What does UN38.3 certification mean for the X5PRO?
UN38.3 is a mandatory international safety standard for lithium batteries intended for transport. The X5PRO passing all eight tests confirms its lithium-ion battery can be safely shipped by air, sea, and ground freight without posing a hazardous risk under normal transport conditions.
Which revision of UN38.3 was used for this test?
The testing was conducted under Revision 8 of the UN Manual of Tests and Criteria, which is the most current revision referenced in this report issued on 2026-01-14.
Who issued the UN38.3 test report for the X5PRO?
The report (ID: WTH25D12334288B) was issued by Waltek Testing Group Co., Ltd., an accredited third-party testing laboratory based in Dongguan, Guangdong, China. The designated reviewer is 秦林伟 (Deval Qin).
Does the X5PRO battery require special packaging for air shipment?
Yes. Even with a valid UN38.3 certificate, lithium-ion batteries must comply with IATA Dangerous Goods Regulations packaging requirements. The X5PRO battery at 22.2 Wh falls below the 100 Wh per-battery threshold, but carriers may still require specific labelling and documentation including this test summary.

Related Documents

The following certification and compliance documents are relevant to the X5PRO Jump Starter with Air Compressor and are recommended for a complete regulatory dossier:

  • CE Declaration of Conformity — Required for sale in the European Economic Area, covering Low Voltage Directive and EMC Directive compliance.
  • FCC ID Certificate — Required for the US market, confirming electromagnetic compatibility of the device’s electronic components.
  • RoHS Compliance Report — Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) per EU RoHS Directive 2011/65/EU.
  • REACH SVHC Declaration — Confirms compliance with REACH Regulation (EC) No 1907/2006 regarding substances of very high concern.
  • IEC 62133 Battery Safety Test Report — Covers additional safety requirements for portable sealed secondary lithium cells and batteries per IEC standards.
  • MSDS / Safety Data Sheet — Material safety data sheet for the lithium-ion battery pack, required by most freight carriers alongside the UN38.3 summary.
  • KC Certification — Required for the South Korean market, covering electrical safety and EMC requirements.

Document Pages

Document Page 1