Document Overview
Document Overview This page presents the Identification and Classification Report for Transport of Goods issued under the UN Manual of Tests and Criteria, Part III, Sub-section 38.3, confirming that the ETENWOLF Air3 portable air pump is not subject to dangerous goods regulations when shipped by…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- International Transportation: CB / MSDS / UN38.3
Document Overview
This page presents the Identification and Classification Report for Transport of Goods issued under the UN Manual of Tests and Criteria, Part III, Sub-section 38.3, confirming that the ETENWOLF Air3 portable air pump is not subject to dangerous goods regulations when shipped by sea or air.
| Field | Detail |
|---|---|
| Document Type | Identification and Classification Report for Transport of Goods |
| Issued Number | SEKSZ202506082857 |
| Applicable Regulation | IMDG CODE (Amdt 42-24) / UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.8 Sub-section 38.3 |
| Classification Outcome | Not Subject to These Regulations (Not Restricted) |
| Issuing Body | Beijing DGM Air Transport Technology Development Co., Ltd. |
| Issued Date | 2025-06-09 |
| Identification Date | 2025-06-08 to 2025-06-09 |
| Validity | Valid within one year of issue date (until 2026-06-09) |
The report was reviewed and stamped by an Appraiser, Checker, and Approver at Beijing DGM Air Transport Technology Development Co., Ltd., fulfilling all procedural requirements for a legally valid transport classification document.
Product Information
The ETENWOLF Air3 is a compact portable air pump designed for on-the-go inflation tasks. It contains an integrated lithium-ion battery pack that powers the pump without requiring an external power source.
| Attribute | Specification |
|---|---|
| Product Name (English) | Portable Air Pump Air3 |
| Battery Model / Group | 1S1P-1300 |
| Battery Chemistry | Single Cell Lithium-ion (Li-ion) |
| Nominal Voltage | 3.7 V |
| Rated Capacity | 1300 mAh |
| Watt-hour Rating | 4.81 Wh |
| Battery Configuration | Pack Battery / Cell Classification |
| Battery Appearance | Yellow, Prismatic |
| Battery Dimensions | 37.0 × 37.0 × 19.0 mm |
| Battery Mass | 33.7 g |
| Lithium Content | N/A (Li-ion, not metallic lithium) |
| Number of Batteries per Package | 72 pieces |
| Packing Type | Contained in equipment |
| Applicant / Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The classification report evaluated the Air3 battery pack against all mandatory inspection criteria defined under IMDG CODE Special Provision 188 and the UN Manual of Tests and Criteria. The table below records each inspection item and its result.
| Inspection Item | Requirement | Result |
|---|---|---|
| Watt-hour Rating | Must be less than 20 Wh per cell / battery | 4.81 Wh — Conform |
| UN38.3 Type Testing | Each battery type must have passed all tests in UN Manual of Tests and Criteria, Part III, Sub-section 38.3 | Conform |
| Quality Management Programme | Batteries must be manufactured under a certified quality management programme | Conform |
| Battery Safety Status | Batteries must not be recalled, waste, or destined for recycling/disposal | Conform |
| 1.2 m Drop Test | Each package must withstand a 1.2 m drop in any orientation | Not Applicable |
| Package Marking (SP 188) | Package must be appropriately marked per Special Provision 188 | Conform |
| Consignment Documentation | Each consignment must be accompanied by a document stating: package contains lithium-ion cells/batteries; handle with care, flammability hazard if damaged; special procedures if package is damaged; telephone number for additional information | Not Applicable |
The battery is described as a single-cell lithium-ion type, yellow and prismatic in shape, measuring 37.0 × 37.0 × 19.0 mm. Based on all inspection results, the goods qualify as Not Restricted under IMDG CODE Special Provision 188 and may be shipped as non-dangerous goods.
Standards & Compliance
The ETENWOLF Air3 battery pack was tested and classified against the following international transport regulations and standards.
| Standard / Regulation | Description |
|---|---|
| IMDG CODE (Amdt 42-24) | International Maritime Dangerous Goods Code — governs the safe transport of dangerous goods by sea |
| UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.8, Sub-section 38.3 | Defines the test series (T1–T8) required to classify lithium batteries for transport purposes |
| IMDG Special Provision 188 | Specifies conditions under which small lithium batteries contained in equipment may be transported as non-dangerous goods |
The UN38.3 test series covers eight individual tests. All applicable tests were conducted by Waltek Testing Group Co., Ltd. using Test Report Number WTH25D05129163B, dated 2025-06-05. Results are summarised below.
| Test | Test Name | Result |
|---|---|---|
| T1 | Altitude Simulation | Pass |
| T2 | Thermal Test | Pass |
| T3 | Vibration | Pass |
| T4 | Shock | Pass |
| T5 | External Short Circuit | Pass |
| T6 | Impact / Crush | Pass |
| T7 | Overcharge | Pass |
| T8 | Forced Discharge | Pass |
All eight tests were passed, satisfying the requirements of UN38.3.3.1(f) or UN38.3.3.2(d) and UN38.3.3.1(g) as applicable.
Validity & Certification Body
The classification report was issued by Beijing DGM Air Transport Technology Development Co., Ltd., an accredited dangerous goods identification and classification body operating under Chinese civil aviation and maritime transport regulations.
| Field | Detail |
|---|---|
| Issuing Authority | Beijing DGM Air Transport Technology Development Co., Ltd. |
| Address | Beijing, P.R. China (Postal Code: 101300) |
| Telephone | 010-69479673 |
| Fax | 010-69479621 |
| Website | www.dgmchina.com.cn |
| [email protected] | |
| Test Laboratory | Waltek Testing Group Co., Ltd. |
| Test Lab Address | No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China |
| Test Lab Tel | +86-769-2267 6998 |
| Test Lab Website | www.waltek.com.cn |
| Test Report Number | WTH25D05129163B |
| Date of Test Report | 2025-06-05 |
| Classification Report Issued | 2025-06-09 |
| Validity Period | One year from date of issue — valid until 2026-06-09 |
The report bears the official stamp of Beijing DGM Air Transport Technology Development Co., Ltd. and is signed by an Appraiser, Checker, and Approver, meeting all requirements for legal validity. Duplication of the report without written approval from DGM China is strictly prohibited.
Frequently Asked Questions
- Is the ETENWOLF Air3 considered a dangerous good for shipping purposes?
-
No. The Air3 is classified as Not Subject to These Regulations under IMDG CODE Special Provision 188. Its lithium-ion battery (1S1P-1300, 4.81 Wh) is well below the 20 Wh threshold, allowing it to be transported as a non-dangerous good both by sea and by air, subject to standard packaging and documentation conditions.
- What is the UN38.3 classification report number for the Air3, and when does it expire?
-
The report number is SEKSZ202506082857, issued on 2025-06-09 by Beijing DGM Air Transport Technology Development Co., Ltd. The report is valid for one year and expires on 2026-06-09. A new classification assessment will be required after that date.
- Which tests did the Air3 battery pass under UN38.3?
-
The Air3 battery (model 1S1P-1300) passed all eight UN38.3 tests: Altitude Simulation (T1), Thermal Test (T2), Vibration (T3), Shock (T4), External Short Circuit (T5), Impact/Crush (T6), Overcharge (T7), and Forced Discharge (T8). Testing was carried out by Waltek Testing Group Co., Ltd. under report number WTH25D05129163B, dated 2025-06-05, using the UN Manual of Tests and Criteria ST/SG/AC.10/11/Rev.8.
- Who is the manufacturer of the Air3 and its battery pack?
-
The Air3 is manufactured by Guangdong Bestek Technology Co., Ltd., located at No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China. Guangdong Bestek is both the applicant and the manufacturer listed on the UN38.3 classification report.
Related Documents
For a complete compliance and regulatory package for the ETENWOLF Air3, the following related certification and test documents are relevant and recommended:
- CE Declaration of Conformity — required for sale in the European Economic Area, covering Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC) under IEC standards.
- FCC Declaration of Conformity — required for the US market, confirming compliance with FCC Part 15 electromagnetic emissions rules.
- KC Certification — required for the South Korean market, covering electrical safety and EMC requirements under Korean Standards.
- RoHS Compliance Report — confirms the product is free from restricted hazardous substances (lead, mercury, cadmium, etc.) under EU RoHS Directive 2011/65/EU.
- REACH SVHC Declaration — confirms no Substances of Very High Concern are present above 0.1% w/w threshold under REACH Regulation (EC) No 1907/2006.
- IEC 62133 Battery Safety Test Report — covers safety requirements for portable sealed secondary lithium cells and batteries, complementing UN38.3 test results.
- MSDS / Safety Data Sheet for Lithium-ion Battery — required by many freight forwarders and carriers alongside the UN38.3 report for documentation of chemical and safety properties.
Document Pages
