Document Overview
Document Overview This article covers the official CB Test Certificate issued for the ETENWOLF P100 Li-ion Battery Pack. The CB scheme (IECEE Certification Body scheme) is an international system that facilitates mutual recognition of safety test results among participating countries, reducing duplicated testing when entering…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- International Transportation: CB / MSDS / UN38.3
Document Overview
This article covers the official CB Test Certificate issued for the ETENWOLF P100 Li-ion Battery Pack. The CB scheme (IECEE Certification Body scheme) is an international system that facilitates mutual recognition of safety test results among participating countries, reducing duplicated testing when entering global markets.
| Field | Detail |
|---|---|
| Certificate Type | CB Test Certificate |
| Certificate Number | CBS 131666 0002 Rev. 00 |
| Issuing Body | TÜV SÜD PSB Pte Ltd (National Certification Body) |
| Document Reference | SG PSB-BT-06401, Page 1 of 1 |
| Issue Date | 2025-05-29 |
| Authorized Signatory | Chenghong Zhu |
| Test Report Reference | 211-282250531-000 |
The certificate confirms that a sample of the product was tested and found to be in conformity with the applicable IEC standards listed below. The test report number 211-282250531-000 forms an integral part of this certificate.
Product Information
The certified product is the ETENWOLF P100 inflation tool, which incorporates the following Li-ion battery pack as its power source.
| Attribute | Value |
|---|---|
| Product Category | Batteries (Li-ion Battery Pack) |
| Model / Type Reference | 1S1P-1500 |
| Nominal Voltage | 3.7 V d.c. |
| Rated Capacity | 1500 mAh |
| Cell Configuration | 1 Series, 1 Parallel (1S1P) |
The applicant, manufacturer, and factory are all registered under Guangdong Bestek Technology Co., LTD., located at No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, 517099 Heyuan City, Guangdong, People’s Republic of China. This confirms a vertically integrated supply chain with a single responsible entity across design, manufacture, and production.
Key Details
The following table consolidates all critical certification data extracted from the CB Test Certificate for the ETENWOLF P100 battery pack.
| Parameter | Detail |
|---|---|
| Certificate Number | CBS 131666 0002 Rev. 00 |
| Revision | Rev. 00 (initial issue) |
| Test Report Number | 211-282250531-000 |
| Document ID | SG PSB-BT-06401 |
| Issue Date | 2025-05-29 |
| Product Type | Li-ion Battery Pack |
| Model Reference | 1S1P-1500 |
| Nominal Voltage | 3.7 V d.c. |
| Rated Capacity | 1500 mAh |
| Applicable Standard (Primary) | IEC 62133-2:2017 |
| Applicable Standard (Amendment) | IEC 62133-2:2017/AMD1:2021 |
| Conformity Result | In conformity |
| National Differences | See test report 211-282250531-000 for details |
| Applicant | Guangdong Bestek Technology Co., LTD. |
| Manufacturer | Guangdong Bestek Technology Co., LTD. |
| Factory | Guangdong Bestek Technology Co., LTD. |
| Factory Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, 517099 Heyuan City, Guangdong, China |
Standards & Compliance
The ETENWOLF P100 Li-ion Battery Pack was tested against the following international standards administered by the IEC (International Electrotechnical Commission).
| Standard | Title / Scope | Role |
|---|---|---|
| IEC 62133-2:2017 | Safety requirements for portable sealed secondary lithium cells and batteries – Part 2: Lithium systems | Primary standard |
| IEC 62133-2:2017/AMD1:2021 | Amendment 1 to IEC 62133-2:2017, incorporating updated safety test requirements for lithium systems | Mandatory amendment |
IEC 62133-2 covers a comprehensive set of safety evaluations for lithium portable battery systems, including tests for continuous low-rate charge, vibration, external short circuit, free fall, thermal abuse, crushing, and overcharge protection. Compliance with AMD1:2021 ensures the product meets the most current revision of these requirements. National differences, where applicable to specific member countries, are documented in the associated test report 211-282250531-000.
Validity & Certification Body
The CB Test Certificate CBS 131666 0002 Rev. 00 was issued on 2025-05-29 and is valid subject to continued compliance with the IECEE CB scheme rules, including factory surveillance and any product changes being reported to the certification body.
| Field | Detail |
|---|---|
| Certification Body | TÜV SÜD PSB Pte Ltd |
| Body Address | 15 International Business Park, TÜV SÜD @ IBP, Singapore 609937 |
| Scheme | IECEE CB Scheme (International) |
| Certificate Issue Date | 2025-05-29 |
| Authorized Signatory | Chenghong Zhu |
| Certificate Revision | Rev. 00 |
TÜV SÜD PSB Pte Ltd is an accredited National Certification Body (NCB) operating under the IECEE CB scheme. The CB scheme allows manufacturers to obtain a single test report and certificate that is recognized by NCBs in over 50 participating countries, streamlining market access across regions including Europe, Asia-Pacific, and the Americas.
Frequently Asked Questions
- What does the CB Test Certificate for the ETENWOLF P100 certify?
- The CB Test Certificate CBS 131666 0002 certifies that the ETENWOLF P100 Li-ion Battery Pack (model 1S1P-1500, 3.7 V, 1500 mAh) has been tested by TÜV SÜD PSB and found to be in conformity with IEC 62133-2:2017 and its Amendment 1 (2021), which are the international safety standards for portable lithium battery systems.
- Which standards were applied during testing?
- The battery pack was evaluated against IEC 62133-2:2017 and IEC 62133-2:2017/AMD1:2021. These standards define safety requirements including overcharge, short circuit, crush, drop, vibration, and thermal abuse tests specifically for lithium cell and battery systems.
- Can this CB certificate be used to support market approvals in other countries?
- Yes. The IECEE CB scheme is recognized by National Certification Bodies in more than 50 countries. The CB Test Certificate and accompanying test report (211-282250531-000) can be submitted to other NCBs to obtain national certifications without repeating full testing, though national differences noted in the test report may require supplementary evaluation.
- Who issued this certificate and where is the issuing body located?
- The certificate was issued by TÜV SÜD PSB Pte Ltd, an accredited National Certification Body located at 15 International Business Park, TÜV SÜD @ IBP, Singapore 609937. The authorized signatory is Chenghong Zhu.
Related Documents
The following certification types are commonly associated with Li-ion battery products such as the ETENWOLF P100 and are recommended for global market compliance.
- UN 38.3 Test Report – Required for the transport of lithium batteries by air, sea, and road under UN38.3 regulations. Covers altitude simulation, thermal testing, vibration, shock, external short circuit, impact, overcharge, and forced discharge.
- CE Declaration of Conformity – Required for placing battery-containing products on the European market, referencing applicable EU directives such as the Battery Regulation and Low Voltage Directive.
- FCC ID Certification – Required for electronic products sold in the United States, covering radio frequency emissions and unintentional radiator requirements under FCC Part 15.
- KC Certification – Required for products entering the South Korean market under the KC safety scheme, applicable to lithium batteries under KC 62133.
- RoHS Compliance Report – Confirms restriction of hazardous substances in electrical and electronic equipment per RoHS Directive 2011/65/EU, required across the EU and many other markets.
- REACH Statement – Documents compliance with the EU REACH regulation regarding substances of very high concern (SVHCs) in the product and its components.
Document Pages
