Document Overview
Document Overview This test report certifies that the ETENWOLF S1 portable tire inflator complies with the EU WEEE Directive 2012/19/EU (Waste Electrical and Electronic Equipment). Issued by Waltek Testing Group (Shenzhen) Co., Ltd., report number WTH25X12333153C confirms that the product meets all recovery and recycling…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This test report certifies that the ETENWOLF S1 portable tire inflator complies with the EU WEEE Directive 2012/19/EU (Waste Electrical and Electronic Equipment). Issued by Waltek Testing Group (Shenzhen) Co., Ltd., report number WTH25X12333153C confirms that the product meets all recovery and recycling requirements for electrical equipment.
Key Report Details:
- Report Number: WTH25X12333153C
- Issue Date: December 25, 2025
- Testing Period: December 15-23, 2025
- Test Result: PASS
- Testing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
- Laboratory Location: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao’an District, Shenzhen, Guangdong, China
Product Information
The certified product is the S1 tire pump, a portable inflation device manufactured by Guangdong Bestek Technology Co., LTD.
| Attribute | Details |
|---|---|
| Product Name | Tire Pump |
| Model Number | S1 |
| Product Weight | 413.72 grams |
| WEEE Category | ANNEX III – Category 5: Small Equipment |
| Manufacturer | Guangdong Bestek Technology Co., LTD |
| Manufacturing Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R.China |
Key Details
The S1 tire inflator achieved exceptional results in recovery and recycling assessments, significantly exceeding the minimum targets established by the WEEE Directive 2012/19/EU.
| Assessment Metric | Minimum Target | Achieved Result | Compliance Status |
|---|---|---|---|
| Recovered Rate | 75% | 83.80% | ✓ PASS |
| Re-use and Recycled Rate | 55% | 74.10% | ✓ PASS |
Disassembly Analysis:
- Connection Components: 13 screws, 2 cells, 0 glue connections
- Disassembly Time: 30 minutes (December 13, 2025)
- PCB Components Identified: 3 circuit boards with dimensions ranging from 2.20cm×1.40cm to 14.20cm×5.20cm
- Total PCB Weight: 25.17 grams
The disassembly procedure followed treatment requirements under Annex II of the WEEE Directive, using manual operation and standard disassembly tools to simulate real-world treatment facility scenarios.
Standards & Compliance
This certification demonstrates compliance with European Union environmental regulations governing the disposal and recycling of electrical and electronic equipment.
Applicable Standards:
- EU WEEE Directive 2012/19/EU – Waste Electrical and Electronic Equipment regulations
- Article 8(2) – Selective treatment requirements for materials and components
- Annex II – Treatment requirements for waste electrical and electronic equipment
- Annex III – Category classification for equipment types
- Annex VII – Selective treatment for materials and components of WEEE
Testing Methodology:
The assessment followed a comprehensive disassembly and materials analysis process to determine recovery and recycling potential. The testing laboratory conducted manual disassembly using standard tools to separate components including PCBs, batteries, plastic housings, and metal parts. Each component was weighed and categorized according to its potential for reuse, recycling, or recovery. The S1 model achieved results that exceed the minimum targets applicable by category from August 15, 2018.
Validity & Certification Body
Issuing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
Waltek Testing Group is an accredited testing facility specializing in environmental compliance, product safety, and regulatory testing for electrical and electronic equipment. The laboratory maintains certifications and accreditations to conduct WEEE assessments in accordance with EU requirements.
Laboratory Contact Information:
- Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao’an District, Shenzhen, Guangdong, China
- Telephone: +86-755-33663308
- Fax: +86-755-33663309
- Email: [email protected]
- Website: http://www.waltek.com.cn
Report Authorization:
This report was signed and authorized by Hugo Chen on behalf of Waltek Testing Group (Shenzhen) Co., Ltd. The report is valid only when issued in full with the laboratory’s official stamp and authorized signatures. Partial reproduction without written permission is not permitted.
Important Notes:
- Results shown refer only to the specific sample tested (Sample Receipt Date: December 15, 2025)
- Applicant name, address, and sample information provided by the applicant
- Report cannot be reproduced except in full without prior written permission
- Report is invalid without specific stamp and authorized signatures
Frequently Asked Questions
What does WEEE compliance mean for the ETENWOLF S1?
WEEE compliance means the S1 tire inflator has been tested and certified to meet European Union requirements for electrical waste management. The product achieved an 83.80% recovery rate and 74.10% recycling rate, both significantly exceeding the minimum thresholds of 75% and 55% respectively. This demonstrates that the product is designed for environmentally responsible end-of-life disposal and material recovery.
Which WEEE category does the S1 belong to?
The S1 portable tire inflator is classified under ANNEX III, Category 5: Small Equipment according to the WEEE Directive 2012/19/EU. This category applies to equipment with external dimensions not exceeding 50 cm, which includes portable inflation devices and similar small electrical products.
How easy is it to disassemble and recycle the S1?
The S1 is designed for efficient disassembly and recycling. The product uses 13 screws and contains 2 battery cells with no glue connections, allowing for complete disassembly in approximately 30 minutes using standard tools. The simple mechanical connection design facilitates component separation at recycling facilities, contributing to its high 74.10% recycling rate.
Is this WEEE certificate valid for sale in the European Union?
Yes, report WTH25X12333153C demonstrates that the S1 meets the recovery and recycling requirements established by EU WEEE Directive 2012/19/EU. This is one of several certifications typically required for legal sale of electrical products in EU member states. Manufacturers must also comply with other EU directives such as CE marking, RoHS, and REACH requirements.
Related Documents
For comprehensive compliance documentation for the ETENWOLF S1 portable tire inflator, consider reviewing these related certification types:
- CE Marking Certification – Confirms conformity with EU health, safety, and environmental protection standards
- RoHS Compliance Report – Restriction of Hazardous Substances directive compliance for electrical equipment
- REACH Compliance – Registration, Evaluation, Authorization and Restriction of Chemicals regulation
- UN38.3 Battery Testing – Transportation safety testing for lithium battery components
- FCC Certification – Federal Communications Commission approval for US market access
- Product Safety Testing – IEC/EN electrical safety standards compliance
- EMC Testing Report – Electromagnetic compatibility assessment
- Environmental Testing – Temperature, humidity, and durability performance validation
These complementary certifications work together to ensure the S1 meets global regulatory requirements for manufacturing, transportation, sales, and end-of-life management across international markets.
Document Pages
