What does REACH SVHC compliance mean for the ETENWOLF HB1 air pump?

REACH is the EU regulation EC No 1907/2006 on chemicals. SVHC compliance means none of the 251 SVHC substances on the ECHA Candidate List were detected above 0.1% by weight in any component of the ETENWOLF HB1, confirming the product is safe and legal to import and sell in the EU and EEA.

Which parts of the HB1 were tested and how many samples were examined?

54 individual material samples were grouped into four test groups: T01 (17 metal components), T02 (19 non-metal components including plastics and rubber), T03 (17 electronic and PCB-related components), and T04 (1 battery cell). All groups returned ND (Not Detected) for every SVHC substance tested.

What does ND (Not Detected) mean in the REACH test report?

ND means the substance concentration is below the laboratory reporting limit (RL), which is set at or below the 0.1% w/w regulatory threshold. An ND result confirms the sample does not trigger any REACH notification or disclosure obligation for that substance.

Does this REACH SVHC report expire and when should it be renewed?

The report does not have a formal expiry date, but ECHA updates the SVHC Candidate List periodically. Manufacturers should monitor ECHA updates and commission a new report when newly listed substances could affect their product materials. Report WTH25X09256007C reflects the Candidate List as of the testing period 2025-09-25 to 2025-09-29.

REACH SVHC Test Report for ETENWOLF HB1 Air Pump (Mini) — Report No. WTH25X09256007C

Document Overview

Document Overview This page presents the findings of a REACH SVHC (Substances of Very High Concern) test report issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory. The document is classified as a chemical compliance test report under European Commission Regulation…

Document type: Certification Report
Prepared by: Michelle Torres
Published: July 22, 2026
Last reviewed: July 22, 2026
Topics: European Union: CE / RoHS / REACH / WEEE

Document Overview

This page presents the findings of a REACH SVHC (Substances of Very High Concern) test report issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory. The document is classified as a chemical compliance test report under European Commission Regulation (EC) No 1907/2006 (REACH).

Report Number: WTH25X09256007C
Document Type: REACH SVHC Test Report
Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
Date of Issue: 2025-10-16
Testing Period: 2025-09-25 to 2025-09-29
Date of Sample Receipt: 2025-09-25
Scope: Determination of 251 Substances of Very High Concern (SVHC) and 4 potential substances listed on the ECHA Candidate List as published at https://echa.europa.eu/candidate-list-table

Overall Test Conclusion: According to the specified scope and analytical techniques applied, the concentrations of all SVHC substances, potential substances, and SVHC-intended compounds are less than 0.1% (w/w) in all submitted sample groups. This confirms compliance with the REACH regulation threshold for articles.

Product Information

The tested product is the ETENWOLF HB1 compact air pump, marketed under the PUMP MINI/A3/HiPUMP model designation. This portable inflation device is designed for versatile inflation tasks and represents a core product line within the ETENWOLF inflation tools range.

Field	Detail
Sample Name	AIR PUMP
Model Number	PUMP MINI / A3 / HiPUMP
Reference Model Number	NA
Brand	ETENWOLF (HB1)
Applicant	Guangdong Bestek Technology Co., LTD
Applicant Address	No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China
Manufacturer	Guangdong Bestek Technology Co., LTD
Manufacturer Address	No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China

The ETENWOLF HB1 is composed of a broad range of material types including metals (casings, coils, contacts, solder), non-metallic polymers and rubbers (shells, wire jackets, soft plastics), electronic components (PCB, SMD components, LED, ICs), and an integrated battery cell. All 54 identified sample parts across four test groups were evaluated for SVHC content.

Key Details

The testing laboratory divided the product samples into four test groups (T01–T04) based on material category. Each group was analysed against the full ECHA Candidate List of 251 SVHC substances plus 4 potential substances. All groups returned a result of ND (Not Detected).

Summary of Test Results by Group

Group No.	Material Category	Result (%,w/w)	RL (%,w/w)
T01	Metal components	ND	—
T02	Non-metal components (plastics, rubber, magnets)	ND	—
T03	Electronic / PCB components and battery parts	ND	—
T04	Battery cell	ND	—

T01 — Metal Components (Sample Details)

Sample No.	Description	Materials Description
5	Metal	Black cladding metal
8	Metal	Silvery metal shell
9	Metal	Coppery metal
10	Metal	Silvery metal axle
11	Metal	Coppery metal coil
12	Metal	Coppery metal sheet
15	Metal	Silvery metal wire core
17	Metal	Silvery metal shell (switch)
18	Metal	Golden cladding metal button (switch)
20	Metal	Silvery metal sheet (switch)
22	Metal	Silvery metal (switch)
24	Metal	Silvery metal shell
26	Metal	Golden cladding metal PIN
36	Metal	Solder
40	Metal	Silvery metal sheet (battery)
41	Metal	Solder (battery)
43	Metal	Silvery metal wire core (battery)

T02 — Non-Metal Components (Sample Details)

Sample No.	Description	Materials Description
1	Nonmetal	White plastic
2	Nonmetal	White plastic shell
3	Nonmetal	Black rubber
4	Nonmetal	Transparent rubber
6	Nonmetal	Beige plastic
7	Nonmetal	Silvery magnet
13	Nonmetal	Black plastic
14	Nonmetal	White plastic wire jacket
16	Nonmetal	Black plastic wire jacket
19	Nonmetal	Yellow plastic adhesive tape (switch)
21	Nonmetal	Black plastic base (switch)
23	Nonmetal	Transparent soft plastic
25	Nonmetal	Black plastic
48	Nonmetal	Black plastic
49	Nonmetal	Black soft plastic
50	Nonmetal	Black soft plastic
51	Nonmetal	Black plastic
52	Nonmetal	Black soft plastic
53	Nonmetal	Black plastic

T03 — Electronic / PCB and Battery Housing Components

Sample No.	Description	Materials Description
27	Nonmetal	Black diode SMD
28	Nonmetal	Brown capacitor SMD
29	Nonmetal	Black triode SMD
30	Nonmetal	Black IC SMD
31	Nonmetal	Yellow glue
32	Nonmetal	Black IC SMD
33	Nonmetal	White resistance SMD
34	Nonmetal	Black IC SMD
35	Nonmetal	Green cladding PCB board (tested as a whole)
37	Nonmetal	Yellow LED
38	Nonmetal	Blue plastic film (battery)
39	Nonmetal	Black plastic label (battery)
42	Nonmetal	Black plastic wire jacket (battery)
44	Nonmetal	Red plastic wire jacket (battery)
45	Nonmetal	Black soft plastic tube
46	Nonmetal	Yellow plastic shell
47	Nonmetal	Red plastic shell

T04 — Battery Cell

Sample No.	Description	Materials Description
54	Cell	Battery

ND = Not Detected. All substance concentrations are below the reporting limit (RL). Results are calculated based on the minimum weight of mixed components.

Standards & Compliance

The ETENWOLF HB1 was tested against the ECHA SVHC Candidate List in accordance with European Commission Regulation (EC) No 1907/2006 (REACH). The test scope covered 251 officially listed SVHC substances and 4 additional potential substances identified by ECHA.

Applicable Regulation

Regulation / Standard	Description
EC No 1907/2006 (REACH)	Registration, Evaluation, Authorisation and Restriction of Chemicals — EU chemical safety regulation
ECHA Candidate List	251 SVHC + 4 potential substances as listed at echa.europa.eu/candidate-list-table

Test Methods Applied

Method Reference	Scope
EPA 3550C:2007	Ultrasonic extraction for solid/semi-solid matrices
US EPA 8270D:2018	GC/MS analysis of semi-volatile organic compounds
US EPA 3052:1996	Microwave assisted acid digestion of siliceous and organically based matrices
US EPA 3050B:1996	Acid digestion of sediments, sludges, and soils
US EPA 6010D:2018	Inductively coupled plasma — optical emission spectrometry (ICP-OES)
BS EN ISO 14362-1:2017	Determination of certain aromatic amines derived from azo dyes — Part 1
BS EN ISO 14362-3:2017	Determination of certain aromatic amines derived from azo dyes — Part 3
ISO 17234-1:2020	Chemical tests for coloured leather — determination of certain azo colorants
ISO 17234-2:2011	Chemical tests for leather — determination of 4-aminoazobenzene
ISO 17353:2004	Water quality — determination of selected organotin compounds
AfPS GS 2019:01 PAK	Polycyclic aromatic hydrocarbons (PAH) testing in consumer articles

The measurement workflow followed a standard chain: sampling → sample pretreatment by acid digestion and solvent extraction → instrumental analysis → data evaluation. An in-house method was applied with reference to the above published standards.

Validity & Certification Body

The test report was prepared and issued by Waltek Testing Group (Shenzhen) Co., Ltd., a professional third-party testing and certification organisation with extensive experience in consumer product chemical compliance for global markets.

Field	Detail
Report Number	WTH25X09256007C
Date of Issue	2025-10-16
Testing Period	2025-09-25 to 2025-09-29
Sample Receipt Date	2025-09-25
Signed By	Hugo Chen, Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Name	Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Address	1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
Telephone	+86-755-33663308
Fax	+86-755-33663309
Email	[email protected]
Website	http://www.waltek.com.cn

REACH SVHC test reports do not carry a fixed expiry date in the same manner as type certifications. However, the report reflects the ECHA Candidate List as it stood at the time of testing. As ECHA periodically updates the Candidate List, manufacturers and importers are advised to monitor updates and retest when new substances are added that may be relevant to their product materials.

Under Article 7(2) and Article 33 of REACH, EU and EEA suppliers of articles containing SVHC above 0.1% (w/w) are required to notify ECHA and provide information to customers and consumers on request within 45 days. This report confirms that no such obligation is triggered for the ETENWOLF HB1 at the time of testing.

Frequently Asked Questions

What does REACH SVHC compliance mean for the ETENWOLF HB1 air pump?: REACH is the European Union regulation on the Registration, Evaluation, Authorisation and Restriction of Chemicals (EC No 1907/2006). SVHC (Substances of Very High Concern) are chemicals identified by the European Chemicals Agency (ECHA) as having serious hazardous properties, such as being carcinogenic, mutagenic, or toxic to reproduction. Compliance means that none of the 251 SVHC substances (plus 4 potential substances) on the ECHA Candidate List were detected above 0.1% by weight in any part of the ETENWOLF HB1, confirming the product is safe to sell and import in the EU and EEA.
Which parts of the HB1 were tested, and how many samples were examined?: A total of 54 individual material samples were extracted from the product and grouped into four test groups: T01 (17 metal components including shells, coils, contacts, and solder), T02 (19 non-metal components including plastics, rubber, and magnets), T03 (17 electronic and PCB-related components including SMD parts, LED, PCB board, and battery housing materials), and T04 (1 battery cell). All groups returned ND (Not Detected) results for every SVHC substance.
What does ND (Not Detected) mean in this report?: ND means Not Detected — the substance concentration in the tested sample is below the laboratory’s reporting limit (RL) for that substance. Reporting limits vary by substance and analytical method, but all are set at or below the 0.1% (w/w) regulatory threshold defined by REACH. A result of ND therefore confirms the sample does not trigger any REACH notification or disclosure obligation for that substance.
Does this REACH SVHC report expire, and when should it be renewed?: The report itself does not carry a formal expiry date. However, ECHA updates the SVHC Candidate List periodically — typically one to two times per year — by adding newly identified hazardous substances. Manufacturers and importers should monitor ECHA updates and commission a new test report when materials in their products could be affected by newly listed substances. Report WTH25X09256007C reflects the Candidate List as assessed during the testing period of 2025-09-25 to 2025-09-29.