Document Overview
Document Overview This article covers the CE Low Voltage Directive (LVD) certification document issued for the ETENWOLF P100 Ball Pump. The certification was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited testing laboratory based in Shenzhen, China. The document confirms that the product…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This article covers the CE Low Voltage Directive (LVD) certification document issued for the ETENWOLF P100 Ball Pump. The certification was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited testing laboratory based in Shenzhen, China. The document confirms that the product has been evaluated against the applicable harmonised standards and found in compliance with EU Directive 2014/35/EU (LVD), authorising the affixing of the CE marking under the manufacturer’s sole responsibility.
- Document Type: CE-LVD Compliance Statement
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Issue Date: 2025-04-28
- Registration No.: WTH25X04098553
- Reference No.: WTH25X04098553J
- Scope: Household and similar electrical appliances — safety and electromagnetic field exposure evaluation
Product Information
The certified product is the ETENWOLF P100 Ball Pump, an electrically powered inflation device designed for household and similar use. Full product details as recorded in the certification document are listed below.
| Field | Detail |
|---|---|
| Product Name | Ball Pump |
| Model No. | P100 |
| Trademark | — |
| Rated Voltage | 5 V |
| Rated Current | 1.5 A |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The certification statement is based on physical sample testing conducted by Waltek Testing Group. The key documentary references and evaluation findings are summarised in the table below.
| Item | Value |
|---|---|
| Registration No. | WTH25X04098553 |
| Reference No. | WTH25X04098553J |
| Applicable Directive | LVD 2014/35/EU |
| Test Result | Compliant — CE marking may be affixed |
| Evaluation Basis | Single sample evaluation; does not imply assessment of whole production |
| Authorised Signatory | Jandy So, Manager |
| Date of Issue | 2025-04-28 |
The referred test reports confirm that the P100 meets the essential safety requirements of the LVD Directive. The manufacturer is responsible for preparing the necessary technical documentation and EU Declaration of Conformity before affixing the CE marking to the product.
Standards & Compliance
The ETENWOLF P100 Ball Pump was tested against the following harmonised European standards, which provide presumption of conformity with the essential requirements of EU Directive 2014/35/EU.
| Standard | Title | Scope |
|---|---|---|
| EN IEC 60335-1:2023+A11:2023 | Household and Similar Electrical Appliances — Safety — Part 1: General Requirements | Primary safety standard covering electrical, mechanical, thermal, and functional safety requirements for household appliances |
| EN 62233:2008 | Measurement Methods for Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human Exposure | Specifies methods for measuring electromagnetic field (EMF) emissions to assess human exposure limits |
Compliance with these harmonised standards satisfies the essential health and safety requirements of the LVD Directive. The manufacturer must also observe any other relevant EU Directives applicable to the product before placing it on the European market.
Validity & Certification Body
The compliance statement was issued on 2025-04-28 and is valid for the specific product sample evaluated. As noted in the document, this statement is based on a single sample evaluation and does not constitute an assessment of the entire production batch. Ongoing compliance remains the responsibility of the manufacturer.
- Issuing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
- Website: http://www.waltek.com.cn
- Telephone: +86-755-3366 3308
- Fax: +86-755-3366 3309
- Email: [email protected]
- Document Version: Ver. 09.24
- Authorised Signatory: Jandy So, Manager
- Date Signed: 2025-04-28
Waltek Testing Group is a registered trademark organisation. Utilisation and application of the certification mark requires prior approval from Waltek.
Frequently Asked Questions
- What does the CE-LVD certification mean for the P100 Ball Pump?
- CE-LVD certification confirms that the ETENWOLF P100 Ball Pump has been tested and found compliant with EU Low Voltage Directive 2014/35/EU. This allows the CE marking to be affixed on the product, indicating it meets the essential safety requirements for sale in the European Economic Area.
- Which test standards were applied to the P100?
- The P100 was tested against EN IEC 60335-1:2023+A11:2023 for general household appliance safety and EN 62233:2008 for electromagnetic field measurement relative to human exposure.
- Who conducted the testing and issued the certificate?
- Testing and the compliance statement were conducted by Waltek Testing Group (Shenzhen) Co., Ltd., an independent accredited laboratory based in Shenzhen, China. The document was signed by Jandy So, Manager, on 2025-04-28.
- Does this certificate cover all production units of the P100?
- No. As stated in the certification document, the compliance statement is based on a single sample evaluation. It does not imply an assessment of the whole production. The manufacturer, Guangdong Bestek Technology Co., Ltd., bears sole responsibility for ensuring ongoing conformity across all production units.
Related Documents
For a complete regulatory compliance profile of the ETENWOLF P100 Ball Pump, the following related certification and test report types are recommended.
- CE-EMC Certificate — Electromagnetic Compatibility testing under EU Directive 2014/30/EU, complementing the LVD certification for full CE marking compliance.
- CE Declaration of Conformity (DoC) — The manufacturer’s formal declaration referencing all applicable EU Directives and harmonised standards, required before CE marking is affixed.
- RoHS Compliance Report — Confirms restriction of hazardous substances under EU RoHS Directive 2011/65/EU, applicable to electrical and electronic equipment.
- REACH SVHC Declaration — Documents compliance with REACH Regulation (EC) No 1907/2006 regarding substances of very high concern.
- FCC Declaration of Conformity — Required for market access in the United States, covering radio frequency emissions.
- UN 38.3 Test Report — If the product incorporates a lithium battery, a UN 38.3 transport test report is required for international shipping compliance.
Document Pages
