Document Overview
Document Overview This page presents the full CE Electromagnetic Compatibility (EMC) test report for the ETENWOLF Vortex S6 cordless inflator pump. The report was issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited third-party electromagnetic compatibility laboratory located in Longgang District, Shenzhen, Guangdong,…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This page presents the full CE Electromagnetic Compatibility (EMC) test report for the ETENWOLF Vortex S6 cordless inflator pump. The report was issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited third-party electromagnetic compatibility laboratory located in Longgang District, Shenzhen, Guangdong, China.
| Field | Detail |
|---|---|
| Document Type | CE-EMC Test Report |
| Reference Number | WTH25H07183677E |
| Test Report Form No. | TRF EN IEC 55014-1: 2021-EMC-001-V01 |
| Internal Form Reference | HCT/RF-23-21 |
| Issuing Laboratory | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Date of Sample Receipt | 2025-07-11 |
| Date of Testing | 2025-07-15 to 2025-07-17 |
| Date of Issue | 2025-07-25 |
| Overall Test Result | Pass |
The report covers conducted disturbance at mains terminals, disturbance power in the frequency range, and radiated disturbances, verifying that the product meets all applicable EMC limits required for CE marking in the European Economic Area.
Product Information
The Equipment Under Test (EUT) evaluated in this report is the ETENWOLF Vortex S6 heavy-duty cordless inflator pump, manufactured and supplied by Guangdong Bestek Technology Co., Ltd.
| Field | Detail |
|---|---|
| Product Name | Inflator Pump |
| Model Number | S6 |
| Brand | ETENWOLF |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Applicant / Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The ETENWOLF Vortex S6 is a heavy-duty cordless inflator designed for inflating car tires, bicycle tires, sports equipment, and other inflatable items. As a motor-driven electrical appliance, it is subject to EMC requirements under the relevant European harmonised standards to ensure it does not cause harmful electromagnetic interference and maintains adequate immunity in its intended operating environment.
Key Details
The test report reference WTH25H07183677E covers three primary EMC test categories as defined by the applicable standards. The following table summarises each test module, the governing standard clause, and the recorded outcome.
| Test Category | Standard Reference | Report Section | Result |
|---|---|---|---|
| Conducted Disturbance at Mains Terminals | EN IEC 55014-1: 2021 | Section 3 | Pass |
| Disturbance Power in the Frequency Range | EN IEC 55014-1: 2021 | Section 4 | Pass |
| Radiated Disturbances | EN IEC 55014-1: 2021 | Section 5 | Pass |
| Harmonic Current Emissions | EN IEC 61000-3-2: 2019+A1:2021 | Section 6 | Pass |
| Voltage Fluctuations and Flicker | EN 61000-3-3: 2013+A2:2021 | Section 7 | Pass |
For each test category, the laboratory documented the measurement uncertainty, applicable limits, EUT setup configuration, instrument setup, test procedure, test equipment list, and detailed test data. The report spans 63 pages in total. Preparation was carried out by Snow Zeng and approved by Tony Wu at Waltek Testing Group HCT (Shenzhen) Co., Ltd.
Standards & Compliance
The ETENWOLF Vortex S6 was evaluated against the following harmonised European standards, which are cited in support of CE marking under the EMC Directive 2014/30/EU.
| Standard | Title / Scope | Applicability |
|---|---|---|
| EN IEC 55014-1: 2021 | Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 1: Emission | Conducted and radiated emission limits for motor-operated appliances |
| EN IEC 55014-2: 2021 | Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 2: Immunity | Immunity requirements for motor-operated appliances |
| EN IEC 61000-3-2: 2019+A1:2021 | Electromagnetic compatibility — Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) | Harmonic current emissions at the mains port |
| EN 61000-3-3: 2013+A2:2021 | Electromagnetic compatibility — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems | Voltage fluctuation and flicker limits |
All four standards are harmonised under the EMC Directive and listed in the Official Journal of the European Union. A passing result against this standard suite is a prerequisite for affixing the CE mark and placing the product on the European market.
Validity & Certification Body
The test report was issued on 2025-07-25 and is valid as issued by the testing laboratory. Certification validity is subject to the applicant maintaining the product in the tested configuration. Any design, component, or manufacturing changes that could affect electromagnetic performance would require re-evaluation.
| Field | Detail |
|---|---|
| Issuing Laboratory | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Laboratory Address | Building B, Tianji Industrial Park, 1/F. & 2/F. & 3/F., No.30-9, Laiyin Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, China |
| Laboratory Website | http://www.hct-test.com |
| Service Telephone | 400-0066-989 |
| Service Email | [email protected] |
| Report Prepared By | Snow Zeng |
| Report Approved By | Tony Wu |
| Date of Issue | 2025-07-25 |
| Report Total Pages | 63 |
Waltek Testing Group HCT is part of the Waltek Testing Group, a multinational testing, inspection, and certification organisation with laboratories accredited to international standards. The Shenzhen facility holds accreditation for EMC, safety, and radio testing relevant to CE, FCC, and other international market certifications.
Frequently Asked Questions
- What does the CE-EMC test report WTH25H07183677E confirm about the ETENWOLF Vortex S6?
-
Report WTH25H07183677E confirms that the ETENWOLF Vortex S6 cordless inflator pump passed all electromagnetic compatibility emission and immunity tests required for CE marking. The tests were conducted at Waltek Testing Group HCT (Shenzhen) Co., Ltd. between 2025-07-15 and 2025-07-17, and the report was issued on 2025-07-25.
- Which EMC standards were applied in testing the S6 inflator?
-
The S6 was tested against four harmonised European standards: EN IEC 55014-1: 2021 and EN IEC 55014-2: 2021 for emission and immunity of household appliances and electric tools, EN IEC 61000-3-2: 2019+A1:2021 for harmonic current emissions, and EN 61000-3-3: 2013+A2:2021 for voltage fluctuations and flicker.
- Is the ETENWOLF Vortex S6 approved for sale in Europe?
-
The CE-EMC test report is one of the required technical documents supporting the CE Declaration of Conformity for the ETENWOLF Vortex S6. A passing EMC result, combined with the applicable safety certifications, allows the manufacturer to affix the CE mark and legally place the product on the European Economic Area market.
- Who manufactured the S6 inflator and who conducted the EMC testing?
-
The ETENWOLF Vortex S6 is manufactured by Guangdong Bestek Technology Co., Ltd., located in Heyuan City, Guangdong, China. The EMC testing was independently conducted by Waltek Testing Group HCT (Shenzhen) Co., Ltd., a third-party accredited laboratory in Shenzhen, China.
Related Documents
The CE-EMC test report is one component of the full technical documentation package required for CE marking. The following related certification and compliance documents are relevant for the ETENWOLF Vortex S6 inflator pump.
- CE-LVD (Low Voltage Directive) Test Report — Electrical safety evaluation under EN 62368-1 or EN 60335 series, required alongside EMC for full CE compliance of motor-driven appliances.
- CE Declaration of Conformity (DoC) — The manufacturer’s formal declaration referencing all applicable directives and harmonised standards, required for CE marking.
- FCC Test Report — Electromagnetic compatibility certification required for sale in the United States market, covering conducted and radiated emissions per FCC Part 15 or Part 18.
- UN 38.3 Battery Transport Test Report — If the S6 includes a built-in lithium-ion battery, a UN 38.3 transport certification is required for international shipping compliance.
- RoHS Compliance Report — Confirms the product and its components comply with EU RoHS Directive 2011/65/EU restrictions on hazardous substances.
- REACH SVHC Declaration — Documents that substances of very high concern under the REACH Regulation (EC) No 1907/2006 are below threshold levels in the product.
- KC Certification — Electromagnetic compatibility and safety certification required for the South Korean market under the KC mark scheme.
Document Pages
