Document Overview
Document Overview This article presents the official UN38.3 Test Summary for the ETENWOLF P100 lithium-ion battery pack. The document was issued by Waltek Testing Group Co., Ltd. (深圳沃特检验集团股份有限公司), an accredited third-party testing laboratory located in Dongguan, Guangdong, China. UN38.3 is the mandatory international standard governing…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- International Transportation: CB / MSDS / UN38.3
Document Overview
This article presents the official UN38.3 Test Summary for the ETENWOLF P100 lithium-ion battery pack. The document was issued by Waltek Testing Group Co., Ltd. (深圳沃特检验集团股份有限公司), an accredited third-party testing laboratory located in Dongguan, Guangdong, China.
UN38.3 is the mandatory international standard governing the transport of lithium batteries by air, sea, and road. It is defined within the United Nations Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria. Compliance with UN38.3 Revision 8 was applied for this assessment.
- Document Type: UN38.3 Test Summary (测试概要)
- Issuing Body: Waltek Testing Group Co., Ltd.
- Unique Test Report ID: WTH25D04093611B
- Issue Date: 2025-04-27
- Standard Revision: Manual of Tests and Criteria, Revision 8 (Rev.8)
- Scope: Full UN38.3 battery transport safety qualification covering 8 required test items
Product Information
The battery pack evaluated in this report is designed for use in the ETENWOLF P100 inflation tool. Below are the complete product and manufacturer details as recorded in the test summary.
| Field | Detail |
|---|---|
| Product Model | 1S1P-1500 |
| Battery Name | Li-ion Battery Pack (锂离子电池组) |
| Battery Type | Lithium Ion Battery (1S1P configuration) |
| Rated Voltage | 3.7 V |
| Rated Capacity | 1500 mAh |
| Rated Energy | 5.55 Wh |
| Physical Shape | Prismatic (棱柱形) |
| Approximate Mass | 55.3 g |
| Manufacturer Name | Guangdong Bestek Technology Co., LTD (广东贝仕达克科技有限公司) |
| Manufacturer Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Manufacturer Tel | 0762-3429081 |
| Manufacturer Email | [email protected] |
Key Details
The following table records all eight UN38.3 test items conducted on the P100 battery pack model 1S1P-1500, along with the result for each. All tests were conducted in accordance with UN38.3 Revision 8.
| # | Test Item | Chinese Name | Result |
|---|---|---|---|
| T.1 | Altitude Simulation | 高度模拟 | ✅ Pass |
| T.2 | Thermal Test | 温度试验 | ✅ Pass |
| T.3 | Vibration | 振动 | ✅ Pass |
| T.4 | Shock | 冲击 | ✅ Pass |
| T.5 | External Short Circuit | 外部短路 | ✅ Pass |
| T.6 | Impact / Crush | 撞击 / 挤压 | ✅ Pass |
| T.7 | Overcharge | 过充电 | ✅ Pass |
| T.8 | Forced Discharge | 强制放电 | ✅ Pass |
Overall Result: All 8 test items passed. The battery pack is certified as safe for transport under UN38.3 Rev.8 requirements.
The test report was reviewed and authorised by Qin Linwei (秦林伟), Designated Reviewer (授权签字人), on 2025-04-27.
Standards & Compliance
The 1S1P-1500 battery pack for the ETENWOLF P100 was tested against the following international standard:
- UN38.3 (Revision 8) — United Nations Manual of Tests and Criteria for lithium metal and lithium-ion batteries intended for transport. This standard requires batteries to pass a series of eight abuse and environmental tests before they may be transported commercially by any mode.
The applicable test methods and their significance are summarised below:
| Test | Purpose |
|---|---|
| Altitude Simulation (T.1) | Simulates low-pressure conditions during air transport (11.6 kPa, 6 hours) |
| Thermal Test (T.2) | Assesses battery stability under rapid temperature cycling (−40°C to +75°C) |
| Vibration (T.3) | Evaluates resistance to transport vibration over a 3-hour frequency sweep |
| Shock (T.4) | Confirms structural integrity under mechanical shock pulses |
| External Short Circuit (T.5) | Verifies safe response to external short circuit at elevated temperature |
| Impact / Crush (T.6) | Tests cell and pack integrity under mechanical deformation |
| Overcharge (T.7) | Confirms the cell withstands overcharge conditions safely |
| Forced Discharge (T.8) | Validates safety during reverse-polarity forced discharge |
Validity & Certification Body
The test summary report WTH25D04093611B was issued on 2025-04-27 and remains valid as long as the battery construction, chemistry, and key parameters remain unchanged from those tested. Any modification to cell chemistry, capacity, voltage, physical dimensions, or pack configuration would necessitate re-testing.
Testing Laboratory:
- Name: Waltek Testing Group Co., Ltd. (深圳沃特检验集团股份有限公司)
- Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China
- Tel: +86-769-2267 6998
- Email: [email protected]
- Website: www.waltek.com.cn
Authorised Signatory: Qin Linwei (秦林伟), Designated Reviewer (授权签字人)
Standard Revision Applied: UN38.3 Rev.8 (Manual of Tests and Criteria, 8th Revised Edition)
Report Number: WTH25D04093611B
Frequently Asked Questions
- Q: What does UN38.3 certification mean for the P100 battery pack?
- UN38.3 certification confirms that the P100 lithium-ion battery pack has passed all eight mandatory transport safety tests defined by the United Nations. This certification is required by international carriers and customs authorities before lithium batteries may be shipped by air, sea, or road. All eight tests in report WTH25D04093611B were passed.
- Q: Which revision of UN38.3 was used for this test?
- The test was conducted in accordance with UN38.3 Revision 8, which is the most current edition of the Manual of Tests and Criteria applicable at the time of testing.
- Q: Who manufactured the battery pack inside the P100?
- The 1S1P-1500 battery pack was manufactured by Guangdong Bestek Technology Co., LTD, located at No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China. The test was independently verified by Waltek Testing Group.
- Q: What are the key electrical specifications of the P100 battery pack?
- The P100 battery pack (model 1S1P-1500) is rated at 3.7 V, 1500 mAh, with a total energy of 5.55 Wh. It is a prismatic lithium-ion cell in a single-cell, single-parallel (1S1P) configuration, with an approximate mass of 55.3 g.
Related Documents
For a complete compliance and safety documentation portfolio for the ETENWOLF P100 inflation tool, the following related certification types are recommended:
- IEC 62133 — Safety requirements for portable sealed secondary lithium cells and batteries. Complements UN38.3 for product-level battery safety certification.
- CE Declaration of Conformity — Required for sale in the European Economic Area, covering the full P100 device under applicable EU directives (LVD, EMC, Battery Directive).
- FCC ID Certification — Required for sale in the United States, confirming electromagnetic compliance of the P100 device.
- KC Certification — Required for sale in South Korea, covering electrical safety and EMC for the P100 and its battery.
- RoHS Compliance Report — Confirms that the P100 battery pack and device are free from restricted hazardous substances per EU RoHS Directive 2011/65/EU.
- REACH SVHC Declaration — Confirms absence of substances of very high concern per REACH Regulation (EC) No 1907/2006.
- MSDS / Safety Data Sheet — Material Safety Data Sheet for the lithium-ion cells used in the P100, required by many freight forwarders alongside the UN38.3 summary.
Document Pages
