Document Overview
Document Overview This document is a RoHS Verification of Conformity certificate issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-06-06. It confirms that the submitted product sample complies with the RoHS Directive 2011/65/EU and its amending directive (EU) No 2015/863. The scope of compliance…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Lighting Gear
Document Overview
This document is a RoHS Verification of Conformity certificate issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-06-06. It confirms that the submitted product sample complies with the RoHS Directive 2011/65/EU and its amending directive (EU) No 2015/863. The scope of compliance covers the determination of levels of ten regulated hazardous substances in electrotechnical products. CE marking may be applied to demonstrate regulatory compliance. This verification is voluntary in nature and applies only to the tested sample; it does not constitute assessment of the entire production line nor authorize use of the Waltek test laboratory logo.
Product Information
The certified product is the ETENWOLF L1 Mini Torch, a compact portable lighting device. Full product details as recorded in the certificate are as follows:
| Field | Details |
|---|---|
| Sample Name | Mini Torch |
| Model Number | L1 |
| Reference Model No. | NA |
| Brand | NA (manufactured for ETENWOLF) |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Applicant Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The certificate verifies that the L1 Mini Torch was tested for the following ten regulated hazardous substances as required under the RoHS Directive:
| # | Regulated Substance | Abbreviation |
|---|---|---|
| 1 | Lead | Pb |
| 2 | Mercury | Hg |
| 3 | Cadmium | Cd |
| 4 | Hexavalent Chromium | Cr(VI) |
| 5 | Polybrominated Biphenyls | PBB |
| 6 | Polybrominated Diphenyl Ethers | PBDE |
| 7 | Bis(2-ethylhexyl) Phthalate | DEHP |
| 8 | Dibutyl Phthalate | DBP |
| 9 | Benzylbutyl Phthalate | BBP |
| 10 | Diisobutyl Phthalate | DIBP |
All ten substances were found to be within permissible concentration limits. Technical documentation was prepared in accordance with EN IEC 63000:2018, enabling the affixing of the CE marking on the product.
| Field | Value |
|---|---|
| Registration No. | WTH25X05118918 |
| Reference No. | WTH25X05118918C |
| Date of Issue | 2025-06-06 |
| Authorized Signatory | Jandy So / GM |
Standards & Compliance
The L1 Mini Torch was tested against the following IEC standards for the determination of regulated hazardous substances in electrotechnical products:
| Standard | Scope |
|---|---|
| IEC 62321-3-1:2013 | Screening — X-ray fluorescence spectrometry |
| IEC 62321-4:2013+AMD1:2017 CSV | Mercury — CV-AAS, CV-AFS, ICP-OES, ICP-MS |
| IEC 62321-5:2013 | Cadmium, lead, chromium — AAS, AFS, ICP-OES, ICP-MS |
| IEC 62321-6:2015 | Polybrominated biphenyls and polybrominated diphenyl ethers — GC-MS |
| IEC 62321-7-1:2015 | Hexavalent chromium — colorimetric method for polymers and electronics |
| IEC 62321-7-2:2017 | Hexavalent chromium — colorimetric method for metals |
| IEC 62321-8:2017 | Phthalates — GC-MS (DEHP, DBP, BBP, DIBP) |
| EN IEC 63000:2018 | Technical documentation for assessment of EEE with respect to the restriction of hazardous substances |
Compliance with these standards gives presumption of conformity with the essential requirements of the RoHS Directive 2011/65/EU as amended by (EU) 2015/863. Note that other relevant EU Directives must also be observed as applicable.
Validity & Certification Body
This Verification of Conformity was issued by:
| Field | Details |
|---|---|
| Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Website | www.waltek.com.cn |
| Tel | +86-755-33663308 |
| Fax | +86-755-33663309 |
| [email protected] | |
| Date of Issue | 2025-06-06 |
| Authorized Signatory | Jandy So, General Manager |
Scope of Validity: This certificate applies solely to the specific sample of the L1 Mini Torch submitted for testing. It is a voluntary verification of conformity and does not imply ongoing production surveillance or quality audits. The Waltek test laboratory logo may not be used in connection with this certificate. Manufacturers and importers remain responsible for ensuring continued compliance of production units.
Frequently Asked Questions
- Q: What does the RoHS certificate for the L1 Mini Torch confirm?
-
The RoHS certificate (Reference No. WTH25X05118918C) confirms that the ETENWOLF L1 Mini Torch complies with the EU RoHS Directive 2011/65/EU and its amendment (EU) 2015/863. It verifies that all ten regulated hazardous substances — including lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs, DEHP, DBP, BBP, and DIBP — are present at or below the maximum permitted concentration values in the product materials.
- Q: Can the CE marking be applied to the L1 Mini Torch based on this certificate?
-
Yes. The certificate explicitly states that CE marking may be affixed to the L1 Mini Torch to demonstrate compliance with the RoHS Directive, provided that the required technical documentation has been prepared in accordance with EN IEC 63000:2018 and all other applicable EU Directives are also observed.
- Q: Who conducted the RoHS testing and when was the certificate issued?
-
The testing was conducted by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory based in Shenzhen, China. The certificate was issued on 2025-06-06 and signed by Jandy So, General Manager. The Registration Number is WTH25X05118918 and the Reference Number is WTH25X05118918C.
- Q: Does this certificate cover all units of the L1 Mini Torch in production?
-
No. This Verification of Conformity applies only to the specific sample submitted to Waltek Testing Group for evaluation. It is issued on a voluntary basis and does not constitute an assessment of the entire production batch or ongoing manufacturing quality. ETENWOLF and Guangdong Bestek Technology Co., Ltd. are responsible for ensuring all production units maintain the same material compliance.
Related Documents
The following additional certification and compliance documents are relevant for the L1 Mini Torch and are recommended for a complete regulatory compliance portfolio:
- CE Declaration of Conformity — A formal self-declaration covering all applicable EU Directives (Low Voltage Directive, EMC Directive, and RoHS Directive) required for CE marking on the EU market.
- FCC Certification — Required for sale in the United States, covering electromagnetic compatibility and radio frequency emissions for electronic devices.
- UN 38.3 Test Report — If the L1 Mini Torch includes a lithium-ion or lithium polymer battery, a UN 38.3 transport safety test report is mandatory for international shipping.
- REACH SVHC Declaration — A substance declaration confirming that no Substances of Very High Concern (SVHCs) under the REACH Regulation (EC) No 1907/2006 are present above the 0.1% threshold.
- IEC 60598 / IEC 62560 Safety Test Report — Product safety testing report for lighting equipment, verifying electrical and mechanical safety requirements.
- KC Certification — Required for the South Korean market, covering safety and electromagnetic compatibility for electronic products.
Document Pages
