ETENWOLF FL1 Kids Rechargeable Flashlight IPX5 Waterproof Test Report

Document Overview

Key Findings The FL1 Kids Rechargeable Flashlight passed IPX5-level waterproof testing with zero internal water ingress detected across all three samples after 10 minutes of low-pressure water jet spray from any angle. Product: FL1 Kids Rechargeable Flashlight (Children’s Flashlight) Report No.: 2025072501 Test Date: 2025-07-25…

Document type
Certification Report
Prepared by
Ryan Cooper
Published
Last reviewed
Topics
Waterproof Testing

Key Findings

The FL1 Kids Rechargeable Flashlight passed IPX5-level waterproof testing with zero internal water ingress detected across all three samples after 10 minutes of low-pressure water jet spray from any angle.

  • Product: FL1 Kids Rechargeable Flashlight (Children’s Flashlight)
  • Report No.: 2025072501
  • Test Date: 2025-07-25
  • Standard: Internal Control Standard (IPX5 equivalent)
  • Samples: 3 PCS
  • Result: PASS — all samples functional post-test, no internal moisture found
  • IPX5 Rating: Confirmed — protected against water jets from any direction

Test Overview

Field Detail
Test Type Waterproof Testing (Reliability Test)
Test Standard Internal Control Standard — IPX5 Level Evaluation
Report No. 2025072501
Test Date 2025-07-25
Product No. / Name FL1 Kids Rechargeable Flashlight (儿童手电筒)
Model / Type Specification FL1
Manufacturer ETENWOLF
Sample Quantity / No. 3 PCS
Test Purpose Evaluate whether the sample meets IPX5 waterproof rating requirements
Test Environment Room Temperature: 23 °C, Relative Humidity: 60%, Power Source: 12 V

Test Equipment & Setup

Item Detail
Test Equipment Box-type Oscillating Tube High-pressure Water Jet All-in-One Machine (箱式摆管强冲水一体机)
Test Method Low-pressure water jet sprayed at the enclosure from any angle
Test Duration 10 minutes continuous spray
Ambient Temperature 23 °C
Relative Humidity 60%
Power Source 12 V
Target IPX Level IPX5

Test Procedure

  1. Pre-test: Confirm sample count (3 PCS, model FL1). Verify the test equipment (box-type oscillating tube water jet machine) is calibrated and powered at 12 V. Record ambient conditions: 23 °C, 60% RH.
  2. Setup: Place each FL1 flashlight sample inside the test chamber in its normal operating orientation.
  3. Procedure: Direct a low-pressure water jet at the enclosure from any angle for a continuous duration of 10 minutes per sample, per IPX5 test methodology.
  4. Post-test inspection: Power on each sample to verify illumination function is intact. Disassemble each sample and inspect the interior for any signs of water ingress or moisture.
  5. Acceptance Criteria: Sample passes if (a) the flashlight powers on and illuminates normally after the test, and (b) no internal water traces are found upon disassembly. Failure is recorded if water ingress is detected or the device fails to function.

Test Data & Results

Phase Observation
Pre-test Samples confirmed visually intact; equipment control diagram verified (设备控制图)
During Test Low-pressure water jet applied from any angle for 10 minutes continuously
Post-test — Function Check Device powers on and illuminates normally (开机能照明)
Post-test — Internal Inspection Disassembly reveals no internal water ingress (拆机内部无渗水)
Overall Result All 3 FL1 samples passed; internal cavity dry; IPX5 waterproof level achieved

Observations: After the 10-minute low-pressure spray test, all three FL1 Kids Rechargeable Flashlight samples operated normally when switched on. Upon disassembly, no water traces were found inside any sample. The results confirm the product meets the IPX5 waterproof protection rating as defined by the internal control standard.

Conclusion

Field Detail
Result ■ Pass (合格)
Standard Internal Control Standard — IPX5 Level
Test Conditions 23 °C, 60% RH, 12 V power source; low-pressure water jet from any angle, 10 minutes
Samples Tested 3 PCS — FL1 Kids Rechargeable Flashlight
Functional Check All samples illuminate normally post-test
Internal Inspection No water ingress detected in any sample upon disassembly
Verdict The FL1 Children’s Flashlight achieves IPX5 waterproof protection and meets internal quality requirements

Document Information

Role Name Date
Tested By (测试/日期) Tan Jianghua 2025-07-25
Checked By (审核/日期) — —
Approved By (核准/日期) — —
Field Detail
Form No. BTK-R-Q142/AO
Product Line Lighting Gear
Source File FL1手电筒-防水性能测试报告-2025.7.25.xlsx
Sheet FL1 (Sheet 1 of 1)

Frequently Asked Questions

What does IPX5 waterproof protection mean for the FL1 flashlight?

IPX5 is the fifth level of the IEC ingress protection scale for water resistance. It means the FL1 flashlight is protected against water jets projected from any direction at low pressure. In practical terms, the flashlight can withstand rain, splashing, and directed streams of water without water entering the housing or affecting function.

How was the waterproof test conducted?

Each of the three FL1 samples was placed in a box-type oscillating tube water jet machine. A low-pressure water jet was applied to the enclosure from any angle for 10 continuous minutes at room temperature (23 °C, 60% RH) using a 12 V power source. After the test, each sample was powered on to verify illumination, then disassembled to inspect the interior for water ingress.

What is the difference between IPX5 and higher ratings like IPX7 or IPX8?

IPX5 protects against water jets but not submersion. IPX7 allows submersion up to 1 metre for 30 minutes, and IPX8 covers deeper or longer submersion as specified by the manufacturer. For a children’s everyday flashlight like the FL1, IPX5 is appropriate for use in rain or wet outdoor conditions, though the light should not be fully submerged in water.

Is this test report based on an international standard?

The test was conducted against ETENWOLF’s internal control standard, which is aligned with IPX5 criteria consistent with IEC 60529 ingress protection classifications. For full regulatory compliance in specific markets, additional third-party certification may be required.

Related Products