Document Overview
Document Overview This page presents the laser safety test report issued for the ETENWOLF L2 Tactical Flashlight. The document is a formal Test Report — not a certificate — covering laser radiation classification under the international standard IEC 60825-1:2014: Safety of laser products – Part…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Compliance & Certification
Document Overview
This page presents the laser safety test report issued for the ETENWOLF L2 Tactical Flashlight. The document is a formal Test Report — not a certificate — covering laser radiation classification under the international standard IEC 60825-1:2014: Safety of laser products – Part 1: Equipment classification and requirements.
- Report Number: GZEE260300105631
- SR Number: 60825-1_V1.1
- Issue Date: 2026-03-24
- Total Pages: 18
- Issuing Laboratory: SGS-CSTC Standards Technical Services Co., Ltd. — Guangzhou Branch, 198 Kezhu Road, Science City, Economic & Technology Development Area, Guangzhou, Guangdong, China
- Scope: Measurement and classification of accessible laser radiation emitted by the product under normal operation and reasonably foreseeable single fault conditions
- Test Period: 2026-03-11 to 2026-03-18
- Date of Receipt of Test Item: 2026-03-11
The report was reviewed by Alex Tan (Reviewer) and Simon Chen (Project Engineer) of the E&E Safety Laboratory at SGS Guangzhou.
Product Information
The product evaluated in this report is the ETENWOLF L2 Tactical Flashlight, a portable, battery-only lighting and laser device designed for tactical use. Key product details are listed below.
| Field | Details |
|---|---|
| Product Name | Tactical Flashlight |
| Trade Mark / Brand | ETENWOLF |
| Model / Type Reference | L2 |
| Applicant | Guangdong Bestek Technology Co., Ltd., No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan, Guangdong, China |
| Rated Voltage / Current | DC 5 V; 2 A |
| Laser Wavelength | 650 nm (red laser) |
| Installation / Use Classification | Portable |
| Supply Connection | Battery only |
| Functions | Emits red laser and LED light when powered; only red laser was evaluated in this report |
The laser diode component used inside the product is detailed below:
| Item | Manufacturer / Trademark | Type / Model | Technical Data |
|---|---|---|---|
| Laser Diode | Fengruicheng Technology Shenzhen Co., Ltd. | FRC650-2-060170070-25 | 3 V; 650 nm; Max. 0.9 mW |
Key Details
The product was tested for accessible emission levels and classified according to IEC 60825-1:2014. The overall test result confirmed that the L2 belongs to Class 2.
Test Conditions
- Environment: Dark room
- Temperature: 20–25 °C
- Relative Humidity: Max. 75%
- Operation Mode: Normal operation simulating intentional optical power emission
Measurement Geometry
- Evaluation Method: Default (simplified) evaluation — Condition 3
- Aperture Diameter: 7 mm (for Condition 3)
- Measurement Distance: 100 mm from the apparent source (for Condition 3)
- Reference Point: Surface of diffuser (for Condition 3)
- Note: Condition 1 was not considered because aided viewing of collimated beams with telescopic optics will not increase the hazard
Classification Test Results Summary
| Clause | Requirement | Verdict |
|---|---|---|
| 4.3 | Classification rules — general | Pass |
| 4.3 a | Radiation of a single wavelength | Pass |
| 4.3 b | Radiation of multiple wavelengths | N/A |
| 4.3 c | Radiation from extended sources | N/A |
| 4.3 d | Non-uniform / non-circular / multiple apparent source | N/A |
| 4.3 e (1) | Time base 0.25 s — selected for Class 2 evaluation | Pass |
| 4.3 e (2) | Time base 100 s — selected for Class 1 evaluation | Pass |
| 4.3 f | Repetitively pulsed or modulated lasers | N/A |
| 5.1 | Compliance under reasonably foreseeable single fault conditions | Pass |
| 5.3 | Determination of product class | Pass |
| 5.4.1 | Measurement geometry — general | Pass |
| 5.4.2 | Default (simplified) evaluation | Pass |
Decision Rule Applied
No decision rule is specified by the IEC standard when comparing measurement results with applicable limits. Conformity decisions were made without applying measurement uncertainty — this is the simple acceptance (accuracy method) decision rule.
Standards & Compliance
The ETENWOLF L2 was evaluated against the following international standard:
| Standard | Title | Clause Scope |
|---|---|---|
| IEC 60825-1:2014 | Safety of laser products – Part 1: Equipment classification and requirements | Full classification requirements including Clauses 4 and 5 |
The standard defines laser product classes from Class 1 (safe under all conditions of normal use) through Class 4 (high-power lasers). Class 2 — which applies to this product — covers visible-light lasers (400–700 nm) with output up to 1 mW. Eye protection is normally afforded by the natural aversion response, including the blink reflex.
The test also references the optional evaluation framework under the IEC 62471 series for photobiological safety, though this clause was marked not applicable (N/A) for this product configuration.
Validity & Certification Body
This test report was issued by SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch — one of the world’s leading testing, inspection, and certification organisations — operating under internationally recognised laboratory accreditation.
- Report Number: GZEE260300105631
- Report Date: 2026-03-24
- Laboratory Name: SGS-CSTC Standards Technical Services Co., Ltd. — Guangzhou Branch
- Laboratory Address: 198 Kezhu Road, Science City, Economic & Technology Development Area, Guangzhou, Guangdong, China
- Reviewing Personnel: Alex Tan (Reviewer), Simon Chen (Project Engineer), E&E Safety Laboratory
- Validity Note: This report reflects the test results for the submitted sample as of the test dates stated. Any change to the product design, laser diode component, or operating parameters may require re-testing.
The report covers 18 pages in total. The extracted text presented here covers Pages 1–7. The complete report is held by the applicant, Guangdong Bestek Technology Co., Ltd., and is available for regulatory submission purposes.
Frequently Asked Questions
- What does Class 2 laser classification mean for the ETENWOLF L2?
-
Class 2 indicates that the red laser emitted by the ETENWOLF L2 operates in the visible wavelength range (650 nm) with power not exceeding 1 mW. Under IEC 60825-1:2014, normal eye protection is provided by the human blink reflex. Deliberate staring into the beam is not recommended.
- Which standard was used to classify the laser in the L2 Tactical Flashlight?
-
The product was tested and classified under IEC 60825-1:2014, the internationally recognised standard for the safety of laser products. The classification method used was the default (simplified) evaluation under Condition 3, with a 7 mm aperture at 100 mm measurement distance.
- Who conducted the laser safety testing for the ETENWOLF L2?
-
Testing was performed by SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch, with the report reviewed by Alex Tan and Simon Chen of the E&E Safety Laboratory. The test period ran from 2026-03-11 to 2026-03-18, and the report was issued on 2026-03-24 under Report No. GZEE260300105631.
- Does the L2 only emit laser light, or does it have other lighting modes?
-
The ETENWOLF L2 can emit both a red laser and LED light when powered. However, only the red laser emission at 650 nm was evaluated in this laser safety report. The LED function was outside the scope of this specific test.
Related Documents
For a complete regulatory compliance picture of the ETENWOLF L2 Tactical Flashlight, the following related certification and test report types are relevant:
- CE Declaration of Conformity — covering applicable EU directives including the Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC) Directive
- FCC ID / SDOC Report — required for radio frequency or electronic device compliance in the United States market; see FCC
- RoHS Compliance Report — restriction of hazardous substances in electrical and electronic equipment; see RoHS Directive
- REACH Declaration — substance compliance for the EU chemical regulation framework
- UN 38.3 Battery Test Report — if the product ships with a lithium battery, UN 38.3 transport testing is required
- KC Certification — required for sale in South Korea under the Korean Certification mark scheme
- IEC 62471 Photobiological Safety Report — optional but recommended for the LED light function of the L2, which was not evaluated in the present laser report
Document Pages
