Document Overview
Document Overview This article documents the CE Electromagnetic Compatibility (EMC) certification issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd. for the ETENWOLF L1 Mini Torch. The certification confirms compliance with the 2014/30/EU European Electromagnetic Compatibility Directive, permitting the affixing of the CE marking on…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Lighting Gear
Document Overview
This article documents the CE Electromagnetic Compatibility (EMC) certification issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd. for the ETENWOLF L1 Mini Torch. The certification confirms compliance with the 2014/30/EU European Electromagnetic Compatibility Directive, permitting the affixing of the CE marking on the product.
- Document Type: CE-EMC Certification
- Issuing Body: Waltek Testing Group HCT (Shenzhen) Co., Ltd.
- Registration No.: WTH25H05118915
- Reference No.: WTH25H05118915E
- Issue Date: May 22, 2025
- Applicable Directive: 2014/30/EU (EMC Directive)
- Scope: Electromagnetic disturbance emissions, immunity, harmonic current, and voltage fluctuation limits for the L1 Mini Torch lighting product.
Product Information
The L1 Mini Torch is a compact lighting device designed and manufactured by Guangdong Bestek Technology Co., LTD. Below are the key product details as recorded in the certification document.
| Field | Detail |
|---|---|
| Product Name | Mini Torch |
| Model | L1 |
| Trade Mark | N/A |
| Rating (Charging) | DC 5V |
| Rating (Battery) | DC 3.8V |
| Applicant / Holder | Guangdong Bestek Technology Co., LTD |
| Manufacturer | Guangdong Bestek Technology Co., LTD |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R.China |
Key Details
The L1 Mini Torch was evaluated against four EN/IEC harmonized standards covering electromagnetic emissions and immunity. The test findings confirmed full compliance with all applicable limits under the 2014/30/EU EMC Directive. The table below summarizes the test standards applied and their scope.
| Standard | Scope | Result |
|---|---|---|
| EN IEC 55015:2019+A11:2020 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (based on CISPR 15:2013 + IS1:2013 + IS2:2013) | PASS |
| EN IEC 61547:2023 | Equipment for general lighting purposes – EMC immunity requirements (IEC 61547:2009) | PASS |
| EN IEC 61000-3-2:2019+A1:2021 | Electromagnetic compatibility (EMC) – Limits for harmonic current emissions (equipment input current ≤16 A per phase) | PASS |
| EN 61000-3-3:2013+A2:2021 | Electromagnetic compatibility (EMC) – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤16 A per phase and not subject to conditional connection | PASS |
Note: This certification statement is based on a single evaluation of the sampled product. It does not imply an assessment of the entire production run. Other relevant EU Directives must also be observed.
Standards & Compliance
The L1 Mini Torch CE-EMC certification is grounded in the following harmonized European standards, which provide presumption of conformity with the essential requirements of the 2014/30/EU EMC Directive.
- EN IEC 55015:2019+A11:2020 — Governs radio disturbance characteristics specific to electrical lighting equipment. This is the primary emissions standard for luminaires and torches, derived from CISPR 15.
- EN IEC 61547:2023 — Defines EMC immunity requirements for general lighting equipment, ensuring the product withstands electromagnetic disturbances in typical operating environments.
- EN IEC 61000-3-2:2019+A1:2021 — Sets limits on harmonic current emissions injected into the public supply network by equipment drawing up to 16 A per phase.
- EN 61000-3-3:2013+A2:2021 — Limits voltage changes, fluctuations, and flicker caused by equipment connected to public low-voltage networks, for devices with rated current ≤16 A per phase.
Compliance with these standards enables the manufacturer to affix the CE marking on the L1 Mini Torch and supports free circulation of the product within the European Economic Area (EEA).
Validity & Certification Body
The CE-EMC certificate for the L1 Mini Torch was issued on May 22, 2025, signed by Tony Wu, Project Manager at Waltek Testing Group HCT (Shenzhen) Co., Ltd.
| Field | Detail |
|---|---|
| Certification Body | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Contact Phone | 0755-84616666 |
| Service Hotline | 400-0066-989 |
| [email protected] | |
| Website | http://[email protected] |
| Registration No. | WTH25H05118915 |
| Reference No. | WTH25H05118915E |
| Issue Date | May 22, 2025 |
| Signatory | Tony Wu / Project Manager |
| Validity Note | Based on single sample evaluation; does not certify full production. Other applicable EU Directives must be separately observed. |
CE-EMC certificates of this type do not carry a fixed expiry date, but manufacturers are expected to maintain technical documentation and re-evaluate upon any product design change. Ongoing market surveillance by EU authorities may require updated documentation at any time.
Frequently Asked Questions
- Q: What does the CE-EMC certificate (Ref: WTH25H05118915E) confirm for the L1 Mini Torch?
- This certificate confirms that the L1 Mini Torch has been tested and found compliant with the electromagnetic compatibility requirements of the 2014/30/EU EMC Directive. The product was evaluated against four harmonized standards — EN IEC 55015, EN IEC 61547, EN IEC 61000-3-2, and EN 61000-3-3 — and passed all tests, authorizing the use of the CE marking.
- Q: Which test standards were applied during the CE-EMC evaluation of the L1 Mini Torch?
- The L1 was tested to four harmonized European standards: EN IEC 55015:2019+A11:2020 (radio disturbance for lighting equipment), EN IEC 61547:2023 (immunity for general lighting), EN IEC 61000-3-2:2019+A1:2021 (harmonic current emissions), and EN 61000-3-3:2013+A2:2021 (voltage fluctuations and flicker).
- Q: Does this CE-EMC certification cover the entire production batch of the L1 Mini Torch?
- No. As explicitly stated in the certificate, the evaluation was performed on a single sample of the L1 Mini Torch. It does not constitute an assessment of the whole production. Manufacturers are responsible for ensuring that all units shipped conform to the tested design through internal quality control processes.
- Q: Is a CE-EMC certificate sufficient for selling the L1 Mini Torch in Europe?
- CE-EMC certification under 2014/30/EU is one required component for EU market access for lighting products. However, other applicable directives — such as the Low Voltage Directive (2014/35/EU), RoHS Directive (2011/65/EU), or battery regulations — may also apply and must be separately satisfied. The L1 certificate itself notes that other relevant directives must be observed.
Related Documents
For a complete regulatory compliance picture of the L1 Mini Torch, the following related certification and documentation types are recommended:
- CE-LVD Certificate — Low Voltage Directive (2014/35/EU) certification, required for electrically powered lighting products operating within defined voltage ranges.
- CE Declaration of Conformity (DoC) — The manufacturer’s formal declaration combining all applicable CE directives, which must accompany the product in the EU market.
- RoHS Compliance Certificate — Restriction of Hazardous Substances (2011/65/EU) compliance documentation, confirming the L1 Mini Torch does not contain restricted substances above threshold limits.
- UN 38.3 Battery Transport Test Report — Since the L1 operates on a DC 3.8V battery, UN 38.3 certification for lithium battery safety during transportation is likely required.
- REACH Declaration — Compliance statement under REACH Regulation (EC) No 1907/2006 confirming no Substances of Very High Concern (SVHCs) are present above 0.1% w/w.
- FCC ID or FCC SDoC — Required for US market distribution; evaluates radio frequency emissions from the L1 Mini Torch under FCC Part 15 rules.
Document Pages
