Document Overview
Document Overview This article covers the CE Low Voltage Directive (LVD) certification document issued for the P300 inflator pump. The certification is governed by European Directive LVD 2014/35/EU and was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-09-29. Field Detail Document Type CE…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Sports & Recreation
Document Overview
This article covers the CE Low Voltage Directive (LVD) certification document issued for the P300 inflator pump. The certification is governed by European Directive LVD 2014/35/EU and was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-09-29.
| Field | Detail |
|---|---|
| Document Type | CE LVD Verification of Compliance |
| Registration No. | WTH25X09255938 |
| Reference No. | WTH25X09255938J |
| Issuing Body | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Issue Date | 2025-09-29 |
| Applicable Directive | LVD 2014/35/EU |
| Scope | Inflator pump for household and similar electrical appliance use |
Product Information
The certified product is the ETENWOLF P300 inflator pump, manufactured by Guangdong Bestek Technology Co., Ltd. The unit operates at 5 V / 2.0 A and is classified as a household and similar electrical appliance. Full product details are listed below.
| Field | Detail |
|---|---|
| Product Name | Inflator Pump |
| Model No. | P300 |
| Trade Name | — |
| Rated Voltage | 5 V |
| Rated Current | 2.0 A |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The following table summarises the core certification data extracted from the original verification document (Reg. No. WTH25X09255938) for the P300 inflator pump.
| Item | Detail |
|---|---|
| Registration No. | WTH25X09255938 |
| Reference No. | WTH25X09255938J |
| Test Result | Found in compliance with LVD 2014/35/EU |
| Assessment Basis | One or several specimens; does not imply assessment of whole production |
| CE Marking Responsibility | After preparation of technical documentation and EU Declaration of Conformity, CE marking may be affixed under the sole responsibility of the manufacturer |
| Authorised Signatory | Jandy So, Manager |
| Report Version | Ver.08.25 |
Standards & Compliance
The P300 inflator pump was tested against the following harmonised European standards, which give presumption of conformity with the essential requirements of LVD 2014/35/EU.
| Standard | Title |
|---|---|
| EN IEC 60335-1:2023+A11:2023 | Household and Similar Electrical Appliances – Safety – Part 1: General Requirements |
| EN 62233:2008 | Measurement Methods for Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human Exposure |
Compliance with these standards satisfies the essential health and safety requirements of European Directive LVD 2014/35/EU. The conformity assessment procedure prescribed by applicable EU harmonisation legislation must be performed by the manufacturer prior to affixing the CE mark.
Validity & Certification Body
The verification document was issued on 2025-09-29 and is based on test specimens evaluated at the time of testing. It does not constitute ongoing production surveillance. Details of the issuing laboratory are provided below.
| Field | Detail |
|---|---|
| Issuing Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Telephone | +86-755-3366 3308 |
| Fax | +86-755-3366 3309 |
| Website | http://www.waltek.com.cn |
| [email protected] | |
| Signatory | Jandy So, Manager |
| Issue Date | 2025-09-29 |
| Document Version | Ver.08.25 |
| Trademark Note | WALTEK is a registered trademark. Utilisation and application require prior approval. Integral publication of this verification and adjoining report(s) is allowed. |
Frequently Asked Questions
- What does the CE LVD certification mean for the P300 inflator pump?
-
CE LVD certification means the P300 inflator pump has been tested and found compliant with European Directive LVD 2014/35/EU, confirming it meets the essential safety requirements for electrical equipment sold within the European Economic Area.
- Which test standards were applied during the CE LVD evaluation?
-
The product was evaluated against EN IEC 60335-1:2023+A11:2023 (general safety requirements for household electrical appliances) and EN 62233:2008 (electromagnetic field measurement with regard to human exposure). Both are harmonised standards under LVD 2014/35/EU.
- What are the registration and reference numbers for this certification?
-
The Registration Number is WTH25X09255938 and the Reference Number is WTH25X09255938J, both issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-09-29.
- Does this certificate cover the P300 PLUS model as well?
-
The certification document on file lists Model No. P300. If you require confirmation of coverage for the P300 PLUS variant, please contact ETENWOLF directly or request the applicable test report referencing the P300 PLUS model designation.
Related Documents
For a complete compliance profile of the P300 / P300 PLUS inflator pump, the following complementary certification types are recommended:
- CE EMC Certificate – Covers electromagnetic compatibility requirements under Directive 2014/30/EU, complementing this LVD certification.
- CE RED Certificate – Required if the product includes any radio or wireless communication features under Directive 2014/53/EU.
- RoHS Compliance Report – Confirms restriction of hazardous substances under RoHS Directive 2011/65/EU.
- REACH SVHC Declaration – Addresses substance of very high concern obligations under REACH Regulation (EC) No 1907/2006.
- UN 38.3 Test Report – Applicable if the product contains a lithium battery, covering transport safety requirements.
- FCC / IC Certification – Required for market access in the United States and Canada.
Document Pages
