Document Overview
Document Overview This article is based on the official User Manual (Version 1.0) for the ETENWOLF Sports Mate P400 Balloon Pump. The manual is issued by the manufacturer, Mozhen Technology (Shenzhen) Co., Ltd, and covers safe operation, balloon inflation methods, and product specifications for end…
- Document type
- User Manual
- Prepared by
- Daniel Wright
- Published
- Last reviewed
- Topics
- User Manual
Document Overview
This article is based on the official User Manual (Version 1.0) for the ETENWOLF Sports Mate P400 Balloon Pump. The manual is issued by the manufacturer, Mozhen Technology (Shenzhen) Co., Ltd, and covers safe operation, balloon inflation methods, and product specifications for end users. The EU Authorised Representative on record is SUCCESS COURIER SL, located at Calle Rio Tormes Num.1, Planta 1, Derecha, Oficina 3, Fuenlabrada, Madrid, 28947, Spain (Reference: OST_EU_20230615000062). Users are advised to read all instructions and safety warnings in full before operating the device.
Product Information
The ETENWOLF Sports Mate P400 is a high-volume electric balloon pump designed for continuous and single-use balloon inflation. It is compatible with both foil and round latex balloons of various sizes.
| Attribute | Detail |
|---|---|
| Model | P400 (Sports Mate) |
| Product Type | Electric Balloon Pump |
| Power Supply | AC 100–120V |
| Power Plug Type | Kind prevail (plug type per regional standard) |
| Manufacturer | Mozhen Technology (Shenzhen) Co., Ltd |
| Manufacturer Address | CN-503, Floor 5, Building 4, Tianan Yungu Industrial Park Phase II, Gangtou Community, Bantian Street, Longgang District, Shenzhen |
| Country of Origin | P.R.C. (China) |
| Manual Version | V1.0 |
| Customer Support | [email protected] | (1) 877-838-0209 Mon–Fri 8AM–5PM PST |
| Website | www.etenwolf.com |
Key Details
Component Overview
The P400 pump includes the following components:
- Power Switch — Three-position switch: Auto, Off, Touch-on
- Inflation Nozzle — Main nozzle for round balloons over 12 inches
- Adapter for Foil Balloons — Dedicated attachment for foil/Mylar balloons
- Adapter for Round Balloons (Under 12 inches) — Smaller attachment for standard latex balloons
- Cable Storage Compartment — Built-in storage for the power cable
- Power Plug — Regional plug configuration
Operating Modes
| Mode | Best Use Case |
|---|---|
| Auto | Continuous inflation of many balloons in sequence |
| Touch-on | Single or small number of balloons; operator-controlled |
| Off | Device powered down |
Step-by-Step Inflation Instructions
- Pinch both sides of the balloon mouth with your fingers.
- Wrap the balloon mouth over the nozzle or appropriate adapter.
- Inflate the balloon by pressing down on the inflation port.
- Release the port when the balloon has reached the desired size.
Adapter Usage Guide
| Balloon Type | Accessory to Use | Switch Mode |
|---|---|---|
| Foil / Mylar balloons | Foil balloon adapter | Auto or Touch-on |
| Round balloons under 12 inches | Round balloon adapter (small) | Auto or Touch-on |
| Round balloons over 12 inches | Main inflation nozzle (no adapter) | Auto or Touch-on |
Installation Note: Both adapters must be installed by rotating them clockwise before use to ensure a secure fit.
Standards & Compliance
Important Safety Requirements
The following mandatory usage requirements apply to the P400 Balloon Pump as stated in the official user manual:
- Power supply must be AC 100–120V only. Do not use with other voltage ratings.
- This is a high-volume pump. Do not operate continuously for more than 2 hours to prevent overheating and potential damage.
- Keep the pump out of the reach of children at all times.
- Do not obstruct the inflation port or blowhole. Maintain ventilation during operation.
Safety Warnings
- Never leave the pump unattended while it is in use.
- Do not use or store the pump in wet or damp conditions.
- Never allow sand, small rocks, or debris to be drawn into the inflation port or blowhole during operation.
- Never look directly into or point the inflation port or blowhole toward eyes while the pump is running.
- Never insert hands or fingers into the inflation port or blowhole at any time.
The product carries an EU Authorised Representative registration (OST_EU_20230615000062), indicating compliance with applicable EU product safety and market access requirements.
Validity & Certification Body
This user manual is published at Version 1.0 and is valid for the P400 model as manufactured by Mozhen Technology (Shenzhen) Co., Ltd. There is no explicit expiry date on the manual itself; however, users are encouraged to check the official website for the most current version.
| Field | Detail |
|---|---|
| Document Version | V1.0 |
| EU Authorised Representative | SUCCESS COURIER SL |
| EU Rep Address | Calle Rio Tormes Num.1, Planta 1, Derecha, Oficina 3, Fuenlabrada, Madrid, 28947, Spain |
| EU Rep Reference Number | OST_EU_20230615000062 |
| EU Rep Contact | [email protected] |
| Manufacturer | Mozhen Technology (Shenzhen) Co., Ltd, Shenzhen, China |
| Extended Warranty Registration | Register at www.etenwolf.com for a 1-year extended warranty |
Frequently Asked Questions
- Q: What is the difference between Auto mode and Touch-on mode on the P400?
- A: Auto mode is designed for inflating large quantities of balloons continuously without needing to hold down a button — ideal for events and parties. Touch-on mode requires the operator to press the inflation port manually for each balloon, giving more control when inflating just one or a few balloons.
- Q: Can I use the P400 to inflate foil (Mylar) balloons?
- A: Yes. The P400 includes a dedicated foil balloon adapter. Install the adapter by turning it clockwise onto the nozzle before use, then select either Auto or Touch-on mode. Do not use the bare nozzle for foil balloons, as it is sized for large round latex balloons over 12 inches.
- Q: How long can I run the P400 continuously before it needs to rest?
- A: The manual specifies a maximum continuous operating time of 2 hours. Exceeding this limit may cause the pump to overheat, which can lead to permanent damage. Allow the unit to cool down before resuming use.
- Q: What should I do if I need support or have a warranty question?
- A: Contact ETENWOLF customer support by email at [email protected] or by phone at (1) 877-838-0209, available Monday through Friday, 8AM–5PM PST. To activate a 1-year extended warranty, register your product at www.etenwolf.com.
Related Documents
For a complete compliance and product documentation set for the ETENWOLF Sports Mate P400, the following related documents are recommended:
- CE Declaration of Conformity — Confirms the P400 meets EU safety, health, and environmental protection requirements under applicable EU directives.
- FCC Declaration of Conformity — Required for electrical devices sold in the United States market; covers electromagnetic compatibility (EMC).
- RoHS Compliance Certificate — Verifies restriction of hazardous substances in electrical and electronic equipment, as required under EU RoHS Directive 2011/65/EU.
- REACH Compliance Statement — Confirms the product and its components comply with EU REACH Regulation (EC) No 1907/2006 regarding chemical safety.
- Product Safety Test Report (IEC 60335 or equivalent) — Independent laboratory test results for household and similar electrical appliances safety standards per IEC guidelines.
- Quick Start Guide / Packaging Insert — Condensed version of key inflation steps for inclusion in retail packaging.
Document Pages
