Document Overview
Document Overview This article is based on the official user manual for the ETENWOLF P600 electric balloon pump, version S V2.0, published under filename P600_manual_EN_20251112.pdf. The document is issued by the brand owner Mozhen Technology (Shenzhen) Co., Ltd, and the product is manufactured by Guangdong…
- Document type
- User Manual
- Prepared by
- Daniel Wright
- Published
- Last reviewed
- Topics
- User Manual
Document Overview
This article is based on the official user manual for the ETENWOLF P600 electric balloon pump, version S V2.0, published under filename P600_manual_EN_20251112.pdf. The document is issued by the brand owner Mozhen Technology (Shenzhen) Co., Ltd, and the product is manufactured by Guangdong Bestek Technology Co., Ltd. It covers safe operating procedures, product features, balloon inflation modes, and nozzle selection guidance for end users.
The manual applies to all regions where the P600 is sold, including North America (110V–120V AC) and the European Union. An EU Authorized Representative is listed for regulatory compliance purposes.
| Field | Detail |
|---|---|
| Document Type | Product User Manual |
| Version | S V2.0 |
| Filename | P600_manual_EN_20251112.pdf |
| Issuing Brand Owner | Mozhen Technology (Shenzhen) Co., Ltd |
| Manufacturer | Guangdong Bestek Technology Co., Ltd |
| Country of Origin | P.R. China |
| Publication Date | 2025-11-12 |
Product Information
The ETENWOLF P600 is a high-volume electric balloon pump designed for inflating large quantities of balloons continuously. It supports multiple balloon types through interchangeable nozzles and adapters, and offers two power switch modes alongside three balloon-type mode settings.
| Specification | Value |
|---|---|
| Model | P600 |
| Brand | ETENWOLF |
| Power Supply | AC 100–120V |
| Pump Type | High-volume electric balloon pump |
| Max Continuous Use | 2 hours |
| Certifications Shown | CE, FCC, RoHS |
| Country of Manufacture | Made in P.R.C. |
| Warranty Extension | 1-year extended warranty (register at https://etenwolf.com) |
Manufacturer Address: No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China
Brand Owner Address: CN-503, Floor 5, Building 4, Tianan Yungu Industrial Park Phase II, Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong, China
EU Authorized Representative: SUCCESS COURIER SL, Calle Rio Tormes Num.1, Planta 1, Derecha, Oficina 3, Fuenlabrada, Madrid, 28947 Spain — OST.EU.202506I5000062
Customer Support: (+1) 866-720-9226, Mon–Fri 8AM–5PM (PST) | [email protected]
Key Details
The ETENWOLF P600 includes a clearly labeled set of components and a straightforward two-switch control system. The table below maps each numbered component to its function as described in the manual.
| Item No. | Component | Function |
|---|---|---|
| 1 | Power Switch | Three positions: Auto, Off, Touch-on |
| 2 | Mode Switch | Three positions: Foil, Long, Round |
| 3 | Long Balloon Inflation Nozzle | For inflating long (modeling) balloons |
| 4 | Inflation Nozzle | General-purpose nozzle for round balloons over 12 inches |
| 5 | Cable Storage | Compartment to store the power cable when not in use |
| 6 | Adapter for Foil Balloon | Attaches to nozzle for foil/Mylar balloon inflation |
| 7 | Adapter for Round Balloon (Under 12 inches) | Fits smaller round balloons under 12 inches in diameter |
| 8 | Power Plug | AC power plug (type may vary by region) |
Power Switch Modes Explained
- Auto: Designed for inflating many balloons continuously. The pump runs without holding the switch down, making it efficient for large-volume tasks such as event decoration.
- Touch-on: Designed for single or a small number of balloons. The pump only operates while the switch is actively pressed, giving more control over inflation volume.
- Off: Stops all pump operation.
Balloon Type Mode Switch
- Foil: Optimized airflow for foil/Mylar balloons. Use with the foil balloon adapter (Item 6).
- Long: Optimized airflow for long modeling balloons. Use with the long balloon inflation nozzle (Item 3).
- Round: Optimized airflow for round latex balloons. Use nozzle (Item 4) for balloons over 12 inches, or adapter (Item 7) for balloons under 12 inches.
Step-by-Step Inflation Procedure
- Pinch the two sides of the balloon mouth with your fingers to open it.
- Wrap the mouth of the balloon over the appropriate nozzle or adapter.
- Inflate the balloon by pressing down on the inflation port (Touch-on mode) or engaging Auto mode.
- Release the port and remove the balloon when it has reached the desired size.
Nozzle and Adapter Selection Guide
| Balloon Type | Accessory to Use | Power Switch | Mode Switch |
|---|---|---|---|
| Long (modeling) balloons | Long Balloon Inflation Nozzle (Item 3) | Auto or Touch-on | Long |
| Foil / Mylar balloons | Adapter for Foil Balloon (Item 6) | Auto or Touch-on | Foil |
| Round balloons over 12 inches | Inflation Nozzle (Item 4) | Auto or Touch-on | Round |
| Round balloons under 12 inches | Adapter for Round Balloon (Item 7) | Auto or Touch-on | Round |
Standards & Compliance
The ETENWOLF P600 carries the following regulatory marks and certifications as indicated on the product packaging and manual cover.
| Mark / Standard | Scope | Region |
|---|---|---|
| CE | Conformity with EU safety, health, and environmental requirements | European Union |
| FCC | Electromagnetic compatibility and radio frequency compliance | United States |
| RoHS | Restriction of hazardous substances in electrical and electronic equipment | European Union / Global |
The manual also instructs that the product must be powered by AC 100–120V only, which aligns with North American and certain international power standards. The EU Authorized Representative registration number OST.EU.202506I5000062 confirms that the product has been registered with an EU representative for post-market surveillance and regulatory compliance as required under applicable EU directives.
Users are advised to register at https://etenwolf.com to activate the 1-year extended warranty program.
Validity & Certification Body
This user manual (version S V2.0) was released on 2025-11-12 and is current as of the date of publication. There is no expiration date associated with a user manual; however, users should verify they are referencing the most current version by checking the ETENWOLF official website.
| Field | Detail |
|---|---|
| Manual Version | S V2.0 |
| Release Date | 2025-11-12 |
| Brand Owner | Mozhen Technology (Shenzhen) Co., Ltd |
| Manufacturer | Guangdong Bestek Technology Co., Ltd |
| EU Representative | SUCCESS COURIER SL, Fuenlabrada, Madrid, 28947 Spain |
| EU Rep Registration No. | OST.EU.202506I5000062 |
| Support Email | [email protected] |
| Support Phone | (+1) 866-720-9226, Mon–Fri 8AM–5PM (PST) |
| EU Support Email | [email protected] |
| Website | https://etenwolf.com |
Frequently Asked Questions
- How long can I run the ETENWOLF P600 continuously without stopping?
-
The P600 is a high-volume pump but should not be operated continuously for more than 2 hours at a time. Exceeding this limit may cause the motor to overheat and result in damage to the pump. Allow the unit to cool down before resuming use.
- What is the difference between the Auto and Touch-on switch modes?
-
The Auto mode keeps the pump running without requiring you to hold the switch, making it ideal for inflating large numbers of balloons in succession. Touch-on mode only runs the pump while you are actively pressing the switch, which gives you more precise control when inflating a single balloon or just a few at a time.
- Which nozzle or adapter should I use for foil balloons versus small round latex balloons?
-
For foil or Mylar balloons, attach the foil balloon adapter (Item 6) to the nozzle and set the Mode Switch to Foil. For round latex balloons under 12 inches, use the round balloon adapter (Item 7) with the Mode Switch set to Round. For round balloons 12 inches or larger, use the standard inflation nozzle (Item 4) with the Round mode setting.
- What voltage does the P600 require, and can I use it outside of North America?
-
The P600 is designed for AC 100–120V power supplies, which is standard in North America. If you are in a region with 220–240V power (such as most of Europe), you will need a suitable voltage converter. Always verify the local power requirements before plugging in the device. The product carries a CE mark for EU compliance, but the manual specifies 100–120V as the required input.
Related Documents
The following document types are typically associated with electric inflation tools such as the ETENWOLF P600 and may be relevant for compliance verification, procurement, or regulatory filing purposes.
- CE Declaration of Conformity — Confirms the product meets all applicable EU directives including Low Voltage Directive (LVD) and EMC Directive. Issued by the manufacturer or brand owner.
- FCC Declaration of Conformity / Test Report — Documents electromagnetic interference testing results required for legal sale in the United States market.
- RoHS Compliance Certificate — Certifies that the product and its components are free from restricted hazardous substances such as lead, mercury, and cadmium.
- IEC 62368-1 or IEC 60335 Safety Test Report — Electrical safety test report applicable to household motor-operated appliances, often required for CE marking.
- REACH Compliance Statement — Confirms no substances of very high concern (SVHC) are present above threshold levels in the product, per EU REACH regulation.
- Product Quality Inspection Report — Factory or third-party inspection report verifying the product meets specified performance and safety criteria prior to shipment.
Document Pages
