Document Overview
Key Findings The ETENWOLF P200 Electric Ball Pump successfully completed a 100-hour charge/discharge lifespan test across all three samples, with no functional failures, stable performance throughout, and all accuracy checks passing. Product: ETENWOLF P200 Electric Ball Pump (Needle-Type) Report No.: 2025041301 Test Period: 2025-03-21 to…
- Document type
- Test Report
- Prepared by
- Jessica Lin
- Published
- Last reviewed
- Topics
- Mechanical Reliability
Key Findings
The ETENWOLF P200 Electric Ball Pump successfully completed a 100-hour charge/discharge lifespan test across all three samples, with no functional failures, stable performance throughout, and all accuracy checks passing.
- Product: ETENWOLF P200 Electric Ball Pump (Needle-Type)
- Report No.: 2025041301
- Test Period: 2025-03-21 to 2025-04-13
- Samples: 3 PCS (C0321-1# through C0321-3#)
- Test Duration: 100 hours continuous charge/discharge cycling
- Load Condition: 4 psi discharge load
- Verdict: PASS — all samples stable, appearance normal, accuracy OK
Test Overview
| Field | Details |
|---|---|
| Test Title | P200 Electric Ball Pump Lifespan Test |
| Product No. / Name | Electric Ball Pump (Needle Type) — ETENWOLF P200 |
| Model / Type Specification | P200 |
| Report No. | 2025041301 |
| Test Date | 2025-03-21 to 2025-04-13 |
| Sample Quantity / No. | 3 PCS |
| Test Type | Reliability Test |
| Test Standard | Internal Control Standard |
| Test Purpose | Evaluate the reliability of the electric ball pump’s service lifespan |
| Acceptance Criteria | No failure of function; observe operational stability |
Test Equipment & Setup
| Item | Details |
|---|---|
| Test Equipment | Power supply / Basketball / Load (4 psi) |
| Room Temperature | 23 °C |
| Relative Humidity | 60 % |
| Power Source | 12 V |
| Discharge Load | 4 psi |
| Target Test Duration | 100 hours (cumulative charge/discharge cycles) |
Test Procedure
- Pre-test: Fully charge each of the 3 sample units before commencing the test.
- Discharge cycle: Connect the sample to a 4 psi load and operate until the battery is fully depleted.
- Charge cycle: Recharge the sample to full capacity.
- Repeat: Continue charge/discharge cycling until a cumulative total of 100 operating hours is reached.
- Monitoring: Record charge time, discharge time, and any anomalies at each cycle.
- Post-test: Inspect appearance, verify all button functions, and perform accuracy testing on each sample.
- Acceptance criteria: No functional failures; continuous stable operation; appearance normal; accuracy test result OK.
Test Data & Results
| Sample ID | Test Duration (Hours) | Issue Description / Observations |
|---|---|---|
| C0321-1# to C0321-3# | 100 | Post-lifespan test observations: 1. Appearance — no abnormalities detected. 2. Battery charge/discharge function normal. Initial charge time approx. 2 hours; initial discharge time approx. 1 hour 10 minutes. After lifespan test: charge time approx. 3 hours; discharge time approx. 1 hour. 3. Sample performance remained stable throughout the lifespan test; continuous stable operation maintained; accuracy test: OK. |
Test pictures captured during the evaluation covered three stages: During Testing, During Charging, and Accuracy Testing.
Conclusion
| Field | Details |
|---|---|
| Overall Assessment | After 100-hour operational lifespan testing, the P200 Electric Ball Pump samples demonstrated continuous stable operation. Appearance, all button functions, and accuracy testing all passed. |
| Standard Applied | Internal Control Standard — No failure of function |
| Test Conditions | 23 °C, 60 % RH, 12 V power source, 4 psi load |
| Samples Tested | 3 PCS (C0321-1# to C0321-3#) |
| Verdict | PASS ■ Qualified |
Document Information
| Role | Name (Pinyin) | Date |
|---|---|---|
| Tested By | Li Guanghua | 2025-04-13 |
| Checked By | Zhang Ronggui | 2025-04-13 |
| Approved By | Mai Shaoqiang | 2025-04-13 |
| Field | Details |
|---|---|
| Form No. | BTK-R-Q142/AO |
| Sheet Name | P200-成品寿命测试 (Sheet 1 of 2) |
| Source File | P200电动球泵-成品寿命测试报告-2025.4.13.xlsx |
Frequently Asked Questions
How many hours does the ETENWOLF P200 Electric Ball Pump lifespan test cover?
The P200 lifespan test runs for a cumulative 100 hours of charge/discharge cycling under a 4 psi load, verifying that the pump maintains continuous stable operation without any functional failures throughout its rated service life.
Does the P200 battery performance change after the 100-hour lifespan test?
Minor changes were observed. Before the test, the initial charge time was approximately 2 hours and discharge time approximately 1 hour 10 minutes. After 100 hours of cycling, charge time extended to approximately 3 hours while discharge time remained close to 1 hour — both within acceptable operational ranges, and all accuracy checks passed.
What is the verdict of the P200 finished product lifespan test?
All three P200 samples passed. After 100 hours of continuous charge/discharge cycling, appearance showed no abnormalities, all button functions operated normally, and accuracy testing confirmed the pump met the internal control standard of no functional failure.
What test standard does the P200 lifespan test follow?
The test follows ETENWOLF’s internal control standard, which requires no failure of function and observable operational stability across the full 100-hour test duration. The test was conducted at 23 °C and 60 % relative humidity with a 12 V power source.
Related Products
Explore the full ETENWOLF P200 Electric Ball Pump test series and related products:
- ETENWOLF P200 Electric Ball Pump — Product Page
- P200 Inflation Time and Accuracy Test Report (P200-打球时间和精度)
For international test standards referenced in reliability testing, see the IEC and ISO standards bodies.