P300/P300PLUS Inflator Pump REACH SVHC Compliance Test Report – 251 Substances Verified

Document Overview

Document Overview This test report (Report No. WTH25X09255942C) certifies compliance with the European Commission Regulation 1907/2006 (REACH Act) for the P300 and P300PLUS inflator pump. The document was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on October 20, 2025. The test evaluated two hundred…

Document type: Certification Report
Prepared by: Michelle Torres
Published: July 22, 2026
Last reviewed: July 24, 2026
Topics: European Union: CE / RoHS / REACH / WEEE

Document Overview

This test report (Report No. WTH25X09255942C) certifies compliance with the European Commission Regulation 1907/2006 (REACH Act) for the P300 and P300PLUS inflator pump. The document was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on October 20, 2025.

The test evaluated two hundred and fifty-one (251) Substances of Very High Concern (SVHC) and four (4) potential substances listed on ECHA’s candidate list. According to the specified scope and analytical technique, all tested substances were found at concentrations less than 0.1% in the submitted samples.

Test Conclusion: All SVHC substances, potential substances, and SVHC intentions are below the regulatory threshold of 0.1% in all tested components.

Product Information

Product Name: Inflator Pump
Model Numbers: P300, P300PLUS
Brand: Not Applicable (NA)
Reference Model: NA

Manufacturer: Guangdong Bestek Technology Co., LTD
Manufacturing Address: No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R.China

The P300 and P300PLUS inflator pumps are portable inflation devices designed for consumer and professional use. The products underwent comprehensive material testing across multiple metal and non-metal components including housings, motors, electronic parts, and rubber seals.

Key Details

The test covered 70+ individual components organized into six test groups (T01-T06). Samples were received in two batches on September 23 and October 11, 2025, with testing conducted between September 23-29 and October 11-14, 2025.

Group No.	Substance Category	Result (%w/w)	Reporting Limit
T01	251 Substances of SVHC and 4 potential substances	ND	0.1%
T02	251 Substances of SVHC and 4 potential substances	ND	0.1%
T03	251 Substances of SVHC and 4 potential substances	ND	0.1%
T04	251 Substances of SVHC and 4 potential substances	ND	0.1%
T05	251 Substances of SVHC and 4 potential substances	ND	0.1%
T06	251 Substances of SVHC and 4 potential substances	ND	0.1%

ND = Not Detected (below 0.1% concentration threshold)

Component Categories Tested:

Metal Components (T01-T02): Screws, axles, coils, stators, shells, pins, switches, inductance coils, solder, and battery contacts
Non-metal Components (T03-T06): Plastic housings, rubber seals, gaskets, o-rings, foam padding, circuit boards, and adhesive materials

Standards & Compliance

The P300/P300PLUS testing was conducted according to European Commission Regulation 1907/2006 (REACH Act), evaluating against the current candidate list published on ECHA’s official website.

Test Methods Applied:

EPA 3550C:2007 – Ultrasonic extraction
US EPA 8270D:2018 – Semivolatile organic compounds by GC/MS
US EPA 3052:1996 – Microwave assisted acid digestion
US EPA 3050B:1996 – Acid digestion of sediments, sludges, and soils
US EPA 6010D:2018 – Inductively coupled plasma-optical emission spectrometry
BS EN ISO 14362-1:2017 – Aromatic amines derived from azo colorants
BS EN ISO 14362-3:2017 – Method for determination of certain aromatic amines
ISO 17234-1:2020 – Determination of certain phthalates
ISO 17234-2:2011 – Determination of phthalates by HPLC
ISO 17353:2004 – Determination of selected phthalates
AfPS GS 2019:01 PAK – Polycyclic aromatic hydrocarbons

The comprehensive testing confirms that the P300 and P300PLUS inflator pumps meet all REACH requirements for substances of very high concern.

Validity & Certification Body

Testing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China

Contact Information:
Tel: +86-755-33663308
Fax: +86-755-33663309
Email: [email protected]
Website: http://www.waltek.com.cn

Report Details:
Report Number: WTH25X09255942C
Issue Date: October 20, 2025
Sample Receipt Dates: September 23, 2025 & October 11, 2025
Testing Period: September 23-29, 2025 & October 11-14, 2025

Authorized Signatory: Hugo Chen
Signed for and on behalf of Waltek Testing Group (Shenzhen) Co., Ltd.

This report is valid at the time of issuance and reflects the specific samples tested. The REACH candidate list is updated regularly, and manufacturers should verify compliance against the current list for ongoing production.

Frequently Asked Questions

Q: What does REACH SVHC compliance mean for the P300/P300PLUS?
A: REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) is an EU regulation that identifies Substances of Very High Concern (SVHC). This test report confirms that all 251 tested substances in the P300 and P300PLUS are below the 0.1% concentration threshold, meaning the products comply with EU chemical safety requirements.

Q: How many components were tested in this report?
A: The test evaluated over 70 individual components across six test groups (T01-T06), including metal parts like screws, coils, and stators, as well as non-metal components such as plastic housings, rubber seals, and electronic circuit boards.

Q: Is this certification required for selling in Europe?
A: Yes, REACH compliance is mandatory for products containing articles sold in the European Economic Area. This report demonstrates that the P300/P300PLUS meets these requirements and can be legally marketed in EU member states.

Q: How often should REACH testing be updated?
A: The ECHA candidate list is updated twice per year (typically in January and July). Manufacturers should monitor updates and retest if new substances are added or if product materials change significantly.