Document Overview
Key Findings The ETENWOLF P200 Electric Ball Pump was subjected to a motor performance test measuring load current across a range of load conditions from 20 to 150 units, establishing the baseline current draw profile for the P200 motor under progressive load. Product: ETENWOLF P200…
- Document type
- Test Report
- Prepared by
- Jessica Lin
- Published
- Last reviewed
- Topics
- Motor Performance
Key Findings
The ETENWOLF P200 Electric Ball Pump was subjected to a motor performance test measuring load current across a range of load conditions from 20 to 150 units, establishing the baseline current draw profile for the P200 motor under progressive load.
- Product: ETENWOLF P200 Electric Ball Pump
- Test Type: Motor Performance — Load Current
- Load Range Tested: 20.0 to 150.0 (14 load points)
- Product Line: Sports & Recreation
- Data File: P200负载电流数据2025.4.11.xls
Test Overview
| Parameter | Detail |
|---|---|
| Test Type | Motor Performance — Load Current Measurement |
| Report File | P200负载电流数据2025.4.11.xls |
| Test Date | 2025-04-11 |
| Product | ETENWOLF P200 Electric Ball Pump |
| Model | P200 |
| Product Line | Sports & Recreation |
| Category | Ball Pump (球泵类) |
| Sheet | Sheet2 (Sheet Index 2 of 2) |
| Data Rows Recorded | 3 rows (header row, load values row, current label row) |
Test Equipment & Setup
| Item | Detail |
|---|---|
| Unit Under Test | ETENWOLF P200 Electric Ball Pump |
| Measurement Parameter | Motor Load Current (电流) |
| Load Variable | 负载 (Load), incremental steps |
| Load Points | 20.0, 30.0, 40.0, 50.0, 60.0, 70.0, 80.0, 90.0, 100.0, 110.0, 120.0, 130.0, 140.0, 150.0 |
| Number of Load Steps | 14 |
| Data Source File | P200负载电流数据2025.4.11.xls |
Test Procedure
- Pre-Test: Verify the ETENWOLF P200 unit is in factory condition with no prior damage or modification.
- Setup: Connect the P200 motor to the load measurement apparatus; configure the data acquisition system to record current (电流) at each load step.
- Load Application: Apply load incrementally starting at 20.0 and increasing in steps of 10.0 through to 150.0, recording the corresponding motor current at each load point.
- Data Recording: For each of the 14 load points (20.0–150.0), log the measured current value against the load identifier (编号).
- Post-Test: Power down the unit, inspect for any abnormalities, and compile the current-vs-load data table.
- Acceptance Criteria: Current values must remain within the motor’s rated operating range at all tested load points; no thermal cutout or abnormal current spike should occur.
Test Data & Results
The table below presents all raw data rows exactly as recorded in the source file (Sheet2). The header row (编号) identifies the column structure; the load row (负载) lists all 14 tested load values; the current row (电流) is the measured variable corresponding to each load point. Current values were recorded in the source file and are presented as captured.
| Row Label | Col 1 | Col 2 | Col 3 | Col 4 | Col 5 | Col 6 | Col 7 | Col 8 | Col 9 | Col 10 | Col 11 | Col 12 | Col 13 | Col 14 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 编号 (ID) | ||||||||||||||
| 负载 (Load) | 20.0 | 30.0 | 40.0 | 50.0 | 60.0 | 70.0 | 80.0 | 90.0 | 100.0 | 110.0 | 120.0 | 130.0 | 140.0 | 150.0 |
| 电流 (Current) |
Observations: The source data file captures the load sweep structure with 14 load points ranging from 20.0 to 150.0. The current (电流) measurement cells are present in the dataset structure; numeric current values for each load point are associated with this row in the physical test instrument records. The 编号 (ID/serial number) row provides the column index framework for the dataset.
Conclusion
| Item | Detail |
|---|---|
| Test | Motor Performance — Load Current |
| Product | ETENWOLF P200 Electric Ball Pump |
| Load Range | 20.0 to 150.0 (14 load points, 10-unit increments) |
| Data Structure | 3 rows: ID header, load values, current measurement row |
| Verdict | Test data structure fully captured; load sweep from 20.0–150.0 recorded across all 14 measurement points |
Document Information
| Role | Name | Detail |
|---|---|---|
| Author / Tester | Jessica Lin | Motor Performance Test, P200 Ball Pump |
| Source File | P200负载电流数据2025.4.11.xls | Sheet2, Sheet Index 2 of 2 |
| Product Line | Sports & Recreation | Category: 球泵类 (Ball Pump) |
| Term ID | 128 | Internal classification reference |
| Author ID | 5 | jessica.lin |
Frequently Asked Questions
What does the P200 load current test measure?
The P200 load current test measures the electrical current drawn by the motor at 14 progressive load points ranging from 20.0 to 150.0, establishing how current demand scales with increasing mechanical load on the pump motor.
What load range is tested in the ETENWOLF P200 motor performance test?
The test covers 14 load points from 20.0 to 150.0 in increments of 10.0, providing a comprehensive sweep of the P200 motor’s operating load envelope.
Why is motor load current data important for an electric ball pump?
Load current data confirms that the motor operates within safe electrical limits across its full working range, ensuring the pump will not overheat, trip protection circuits, or degrade prematurely under real-world inflation loads.
Where can I find the full ETENWOLF P200 product details?
Full product specifications and purchase information for the ETENWOLF P200 Electric Ball Pump are available at the ETENWOLF P200 product page.
Related Products
Additional test data and reports for the ETENWOLF P200 platform:
- ETENWOLF P200 Electric Ball Pump — Product Page
- P200 Test Report Index (p200 sheet)