ETENWOLF P600 Electric Balloon Pump Drop Test Report (100 cm, 6-Face)

Document Overview

Key Findings The ETENWOLF P600 electric balloon pump (model B6) passed a 6-face, 100 cm drop test with no housing cracks or functional failures across all three samples. Test type: Drop test (Mechanical Reliability) Drop height: 100 cm Drop faces: 6 (one drop per face,…

Document type
Test Report
Prepared by
Jessica Lin
Published
Last reviewed
Topics
Mechanical Reliability

Key Findings

The ETENWOLF P600 electric balloon pump (model B6) passed a 6-face, 100 cm drop test with no housing cracks or functional failures across all three samples.

  • Test type: Drop test (Mechanical Reliability)
  • Drop height: 100 cm
  • Drop faces: 6 (one drop per face, 6 total drops)
  • Samples tested: 3 PCS
  • Housing condition after drops: No cracks, no damage
  • Power-on function after drops: Normal airflow confirmed
  • Verdict: Reference (参考 / Reference)
  • Report number: 2025051601
  • Test date: 2025-05-16

Test Overview

Field Details
Test Type Drop Test — Mechanical Reliability
Standard / Test Reason New Product Qualification
Report Number 2025051601
Date 2025-05-16
Product ETENWOLF P600 Electric Balloon Pump (B6)
Manufacturer BTK
Sample Quantity 3 PCS
Surface Treatment —
Laboratory Temperature 22 °C
Laboratory Humidity 55% RH
Page 1.0

Test Equipment & Setup

Item Details
Instrument Name Single-arm drop testing machine (单臂跌落试验机)
Drop Height 100 cm
Number of Drop Faces 6 faces (6 drops total)
Sample Weight Recorded on file (not specified in report)
Test Class As specified in report (field present, value not populated)
Environment — Temperature 22 °C
Environment — Humidity 55% RH

Test Procedure

  1. Pre-test: Verify laboratory environment is within required conditions (22 °C, 55% RH). Record sample quantity (3 PCS) and visually inspect each unit for pre-existing damage. Photograph samples before testing (跌落前 / before drop).
  2. Setup: Mount each sample in the single-arm drop testing machine. Set drop height to 100 cm.
  3. Procedure: Drop each sample from 100 cm onto each of the 6 faces in sequence (Face 1 through Face 6), for a total of 6 drops per sample. Photograph each drop event.
  4. Post-test inspection: After all 6 drops, visually inspect the housing for cracks or damage. Power on each unit and verify normal airflow operation.
  5. Recording: Document housing condition and functional status for each sample. Record overall test result.

Acceptance Criteria: Housing must show no cracks or breakage after all 6 drops. Unit must power on and produce normal airflow.

Test Data & Results

Evaluation Item Drop 1 Drop 2 Drop 3 Drop 4 Drop 5 Drop 6
Housing condition after drop No housing damage observed (跌落后外壳无损伤)
Power-on / Airflow function Normal airflow on power-on (开机风量正常)

Observations: After 100 cm single-arm drop testing across all 6 faces, the B6 balloon pump samples showed no housing cracks or breakage and all units powered on with normal airflow function. (试验结果: B6样品经100cm单臂跌落后，外壳无开裂无破损，开机功能正常)

Conclusion

Result Standard / Requirement Test Conditions Samples Verdict
Housing: No cracks or damage. Function: Normal airflow confirmed on power-on. Housing must not crack; unit must power on normally after 6-face, 100 cm drop. 100 cm drop height, 6 faces, single-arm drop machine, 22 °C, 55% RH 3 PCS (B6 Electric Balloon Pump) Reference (参考)

Document Information

Role Name (Pinyin)
Approval (核准) Mai Shaoqiang
Review (审查) Zhang Ronggui
Tester (试验人) Li Guanghua
Form Number BTK-R-Q-087A/1
Report Number 2025051601
Page 1.0

Frequently Asked Questions

What does the drop test evaluate for the P600 balloon pump?

The drop test assesses the mechanical reliability of the P600 housing and internal components when subjected to impact forces. Specifically, it checks whether the outer shell cracks or breaks and whether the unit can still power on and deliver normal airflow after being dropped from 100 cm onto all 6 faces.

Why is the verdict listed as Reference rather than Pass?

A verdict of Reference (参考) indicates the test was conducted for informational or benchmarking purposes as part of new product qualification, rather than against a mandatory external standard. The product met all stated acceptance criteria — no housing damage and normal operation — but the result is classified as reference data rather than a formal compliance pass.

How many drops does the P600 undergo during the test?

Each sample is dropped 6 times from a height of 100 cm, once per face of the unit (top, bottom, front, back, left, right), for a total of 6 drops per sample. Three samples were tested in this report.

What laboratory conditions are required for this test?

The test is conducted at a controlled temperature of 22 °C and a relative humidity of 55% RH, using a single-arm drop testing machine calibrated to a drop height of 100 cm.

Related Products