Document Overview
Key Findings The ETENWOLF P600 Electric Balloon Pump successfully passed ISTA-2A transport vibration testing across all three axes (X, Y, Z) with no functional or cosmetic anomalies observed after a 1-hour random vibration sequence. Product: P600 Electric Balloon Pump (Model B6) Standard: ISTA-2A Test Mode:…
- Document type
- Test Report
- Prepared by
- Jessica Lin
- Published
- Last reviewed
- Topics
- Mechanical Reliability
Key Findings
The ETENWOLF P600 Electric Balloon Pump successfully passed ISTA-2A transport vibration testing across all three axes (X, Y, Z) with no functional or cosmetic anomalies observed after a 1-hour random vibration sequence.
- Product: P600 Electric Balloon Pump (Model B6)
- Standard: ISTA-2A
- Test Mode: Random vibration, 3-axis (X, Y, Z)
- Duration: 1 hour
- Vibration Frequency: 4 Hz
- Test Speed (CMP): 240 G
- Vibration Amplitude: 25.4 mm
- Sample Size: 3 pcs
- Verdict: PASS — normal airflow, normal startup function, no cosmetic defects
Test Overview
| Field | Detail |
|---|---|
| Test Type | Transport Vibration Test |
| Standard / Test Class | ISTA-2A |
| Report Number | 2025051601 |
| Report Date | 2025-05-16 |
| Page | 1 |
| Product Name | ETENWOLF P600 Electric Balloon Pump (B6) |
| Manufacturer | BTK |
| Surface Treatment | / |
| Sample Quantity | 3 PCS |
| Test Reason | New Product |
| Test Objective | To verify the resistance of the sample under transportation and use-environment vibration conditions |
| Laboratory Environment | Temperature: 22 °C; Humidity: 55% RH |
Test Equipment & Setup
| Parameter | Value |
|---|---|
| Instrument Name | Vibration Testing Machine |
| Test Pattern | Random Mode |
| Test Duration | 1 H |
| Random Directions | X, Y, Z |
| Vibration Frequency | 4 Hz |
| Test Speed (CMP) | 240 G |
| Vibration Amplitude | 25.4 mm |
| Test Requirement | Performance evaluation under vibration environment; verify stability and durability during use |
Test Procedure
- Pre-test inspection: Record appearance and functional baseline of all 3 samples; confirm laboratory environment at 22 °C and 55% RH.
- Sample placement: Mount samples on the vibration testing machine per the vibration placement diagram (振动摆放图) and connect to the vibration control chart (振动控制图).
- Vibration execution: Run random-mode vibration at 4 Hz, 240 G CMP, 25.4 mm amplitude for 1 hour across axes X, Y, and Z per ISTA-2A protocol.
- Post-test functional check: Power on each sample and verify airflow output is normal.
- Post-test cosmetic check: Inspect all samples for any surface damage, deformation, or loose components.
- Acceptance criteria: All samples must power on normally, produce normal airflow, and exhibit no cosmetic anomalies to receive a PASS judgment.
Test Data & Results
| Stage | Check Item | Observation |
|---|---|---|
| Pre-vibration | Sample placement & vibration control setup | Samples positioned per vibration placement diagram; vibration control chart connected and confirmed |
| Post-vibration | Power-on airflow | Airflow normal after power-on (开机风量正常) |
| Post-vibration | Overall performance | Performance normal; no cosmetic abnormalities; startup function normal |
Test result summary (测试结果): After transport vibration testing, B6 samples exhibited normal performance, no cosmetic anomalies, and normal power-on function across all 3 units.
Conclusion
| Item | Detail |
|---|---|
| Result | PASS |
| Standard | ISTA-2A |
| Conditions | Random mode, 4 Hz, 240 G CMP, 25.4 mm amplitude, 1 H, axes X/Y/Z, 22 °C, 55% RH |
| Samples Tested | 3 PCS (B6 Electric Balloon Pump) |
| Verdict | ■ Pass — normal airflow, normal startup, no cosmetic defects |
Document Information
| Role | Name |
|---|---|
| Approval (核准) | Mai Shaoqiang |
| Review (审查) | Zhang Ronggui |
| Tester (试验人) | Li Guanghua |
| Form Number | BTK-R-Q-087A/1 |
Frequently Asked Questions
What vibration standard does the ETENWOLF P600 Electric Balloon Pump comply with?
The P600 was tested to ISTA-2A, an internationally recognized transport simulation standard. The test ran for 1 hour in random mode across X, Y, and Z axes at 4 Hz, 240 G CMP, and 25.4 mm amplitude, and all 3 samples passed.
Did the P600 balloon pump show any damage after the vibration test?
No. After completing the full 1-hour ISTA-2A random vibration sequence, all three P600 samples powered on normally, produced normal airflow, and showed no cosmetic anomalies or structural damage.
What laboratory conditions were used during the P600 vibration test?
The test was conducted at 22 °C and 55% RH. The vibration testing machine operated in random mode at a frequency of 4 Hz, a speed of 240 G CMP, and an amplitude of 25.4 mm for a total duration of 1 hour.
Why was the P600 transport vibration test conducted?
The test was initiated as part of new-product verification to simulate the vibration stresses the P600 Electric Balloon Pump may encounter during transportation and normal use, confirming its structural stability and functional durability before market release.