Document Overview
Document Overview This article covers the CE Electromagnetic Compatibility (EMC) Certification issued for the P300PLUS inflator pump. The certificate was issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., a third-party testing laboratory based in Shenzhen, China. Field Details Registration Number WTH25H09255944 Reference Number WTH25H09255944E…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This article covers the CE Electromagnetic Compatibility (EMC) Certification issued for the P300PLUS inflator pump. The certificate was issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., a third-party testing laboratory based in Shenzhen, China.
| Field | Details |
|---|---|
| Registration Number | WTH25H09255944 |
| Reference Number | WTH25H09255944E |
| Certificate Type | CE-EMC (Electromagnetic Compatibility) |
| Issuing Body | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Applicable EU Directive | EMC Directive 2014/30/EU |
| Issue Date | September 30, 2025 |
| Signed By | Tony Wu, General Manager |
The certification confirms that the product has been tested and found compliant with the essential EMC requirements prescribed by the relevant EU harmonisation legislation, authorising the affixing of the CE marking under the sole responsibility of the manufacturer.
Product Information
The certified product is the P300PLUS inflator pump, an electric inflation tool designed for portable use. Below are the key product details as recorded on the certificate.
| Field | Details |
|---|---|
| Product Name | Inflator Pump |
| Model | P300PLUS |
| Trade Mark | N/A |
| Rated Input | DC 5V / 2A |
| Applicant / Holder | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The P300PLUS operates on a low-voltage DC input of 5V/2A, classifying it within the scope of household appliances and similar electric tools for EMC assessment purposes.
Key Details
The following table summarises the test standards applied during the EMC evaluation of the P300PLUS inflator pump, along with a description of each standard’s scope.
| Standard | Description |
|---|---|
| EN IEC 55014-1: 2021 | Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission (based on CISPR 14-1:2016 + COR1:2016) |
| EN IEC 55014-2: 2021 | Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 2: Immunity – Product family standard (based on CISPR 14-2:2015) |
| EN IEC 61000-3-2: 2019+A1:2021 | Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
| EN 61000-3-3: 2013+A2:2021 | Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
All four standards were assessed and the product was found in full compliance. The test results are documented in the referenced test reports under registration number WTH25H09255944.
Standards & Compliance
The P300PLUS inflator pump achieved compliance with the EU EMC Directive 2014/30/EU, which establishes the electromagnetic compatibility requirements for electrical and electronic equipment placed on the European market.
- Emissions testing was conducted per EN IEC 55014-1:2021, covering conducted and radiated disturbances from the product.
- Immunity testing was conducted per EN IEC 55014-2:2021, verifying the product’s resistance to electromagnetic disturbances.
- Harmonic current emissions were evaluated per EN IEC 61000-3-2:2019+A1:2021, confirming limits for input currents up to 16 A per phase are met.
- Voltage fluctuations and flicker were assessed per EN 61000-3-3:2013+A2:2021, confirming compliance for low-voltage supply system connection.
Upon completion of the required technical documentation and the EU Declaration of Conformity, the CE marking may be affixed to the product under the sole responsibility of the manufacturer, Guangdong Bestek Technology Co., Ltd.
Validity & Certification Body
The certificate was issued on September 30, 2025 and is valid based on the test report(s) referenced under registration number WTH25H09255944 and reference number WTH25H09255944E.
| Field | Details |
|---|---|
| Issuing Laboratory | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Laboratory Tel | 0755-84616666 |
| Service Tel | 400-0066-989 |
| Laboratory Email | [email protected] |
| Authorised Signatory | Tony Wu, General Manager |
| Issue Date | September 30, 2025 |
| Scope | Single or multiple specimens of the P300PLUS inflator pump; does not imply assessment of entire production |
It is important to note that this certificate is based on one or several specimens of the product and does not constitute an assessment of the entire production batch. The manufacturer bears sole responsibility for ongoing conformity of the production.
Frequently Asked Questions
- What does the CE-EMC certificate for the P300PLUS cover?
-
The CE-EMC certificate (Reference No. WTH25H09255944E) confirms that the P300PLUS inflator pump complies with the EU EMC Directive 2014/30/EU. It covers electromagnetic emissions and immunity testing under EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC 61000-3-2:2019+A1:2021, and EN 61000-3-3:2013+A2:2021, ensuring the product does not cause harmful electromagnetic interference and is adequately immune to such interference.
- Who issued the CE-EMC certificate for the P300PLUS inflator pump?
-
The certificate was issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., a third-party testing laboratory located in Shenzhen, China. The certificate was signed by Tony Wu, General Manager, on September 30, 2025.
- Does this certificate guarantee that every P300PLUS unit is compliant?
-
No. As stated in the certificate, the assessment is based on one or several specimens of the P300PLUS and does not imply an assessment of the whole production. The manufacturer, Guangdong Bestek Technology Co., Ltd., is solely responsible for ensuring ongoing production conformity.
- What is required before the CE marking can be placed on the P300PLUS?
-
Before the CE marking can be affixed to the P300PLUS, the manufacturer must prepare the necessary technical documentation and issue an EU Declaration of Conformity (DoC). The conformity assessment procedure prescribed by the applicable EU harmonisation legislation must also be completed. Only then may the CE marking be applied under the sole responsibility of the manufacturer.
Related Documents
For a complete compliance profile of the P300PLUS inflator pump, the following related certification and documentation types are recommended:
- CE-LVD (Low Voltage Directive 2014/35/EU) — Covers electrical safety requirements for devices operating within specified voltage ranges. Relevant if the P300PLUS has an AC-powered charging adapter in the supply chain.
- EU Declaration of Conformity (DoC) — A mandatory manufacturer declaration referencing all applicable EU directives and harmonised standards, required before CE marking can be applied.
- UN 38.3 Battery Transport Certification — If the P300PLUS contains a lithium-ion battery, UN 38.3 certification is required for safe transport by air, sea, and road.
- RoHS Compliance Report — Confirms the product meets RoHS Directive 2011/65/EU restrictions on hazardous substances in electrical and electronic equipment.
- REACH SVHC Declaration — Documents compliance with REACH Regulation (EC) No 1907/2006 regarding substances of very high concern.
- FCC Part 15 Certification — Required for sale of the P300PLUS in the United States market, covering unintentional RF emissions.
Document Pages
