Document Overview
Document Overview This article covers the FCC Supplier’s Declaration of Conformity (SDoC) issued for the ETENWOLF P600 Electric Balloon Pump. The document was issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., a recognized testing laboratory, and bears the reference number WTH25H11294796E (Registration No. WTH25H11294796).…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Sports & Recreation
Document Overview
This article covers the FCC Supplier’s Declaration of Conformity (SDoC) issued for the ETENWOLF P600 Electric Balloon Pump. The document was issued by Waltek Testing Group HCT (Shenzhen) Co., Ltd., a recognized testing laboratory, and bears the reference number WTH25H11294796E (Registration No. WTH25H11294796). The certification was completed on November 20, 2025, confirming compliance with FCC Rules and Regulations for marketing the product in the United States. The scope of this certificate covers radio frequency emissions testing under 47 CFR Part 15, Subpart B.
Product Information
The certified product is the ETENWOLF P600 Electric Balloon Pump, an electric inflation device designed for balloon inflation applications. Key technical specifications are as follows:
| Attribute | Details |
|---|---|
| Product Name | Electric Balloon Pump |
| Model | P600 |
| Trade Mark | N/A |
| Input Power | AC 110–120 V, 60 Hz, 660 W |
| Applicant / Holder | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The following table summarises the core certification details extracted directly from the official document:
| Field | Value |
|---|---|
| Registration No. | WTH25H11294796 |
| Reference No. | WTH25H11294796E |
| Certificate Type | FCC Verification of Conformity (VoC) / SDoC |
| Issuing Laboratory | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Authorised Signatory | Tony Wu, General Manager |
| Issue Date | November 20, 2025 |
| Applicable Regulation | 47 CFR Part 15, Subpart B (October 2020 edition) |
| Measurement Procedure | ANSI C63.4:2014 + A1:2017 |
| Labelling Requirement | Must comply with Section 15.19(a) labelling requirements |
| FCC Logo Usage | Voluntary; permitted only for products fully compliant with SDoC procedures |
The Verification of Conformity (VoC) is issued on the basis of a single test of a representative sample of the device. It does not imply an assessment of the entire production lot. The responsible party (Guangdong Bestek Technology Co., Ltd.) is required to provide test reports and supporting compliance documentation upon request by the Federal Communications Commission (FCC).
Standards & Compliance
The ETENWOLF P600 was tested and found compliant with the following regulatory standards and measurement procedures:
- 47 CFR Part 15, Subpart B (October 2020) — Unintentional radiators; governs limits for radio frequency emissions from digital devices to prevent harmful interference with authorised radio communications.
- ANSI C63.4:2014 + Amendment A1:2017 — American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz; defines the measurement procedures used during emissions testing.
- FCC Section 15.19(a) — Labelling requirements mandating that the device carry the prescribed FCC compliance statement.
- FCC Section 2.906 — Supplier’s Declaration of Conformity (SDoC) procedure required prior to marketing the device in the United States.
Compliance was verified through electromagnetic emissions testing conducted by Waltek Testing Group HCT (Shenzhen) Co., Ltd. The device is classified as an unintentional radiator subject to SDoC authorisation under the FCC framework.
Validity & Certification Body
The Verification of Conformity (VoC) was issued on November 20, 2025. As an SDoC-based certification, its validity is contingent on the responsible party maintaining compliance with FCC rules and being able to produce test reports and supporting documentation upon FCC request at any time. Any change to the product design, components, or manufacturing process that could affect RF emissions may require re-testing.
| Certification Body Detail | Information |
|---|---|
| Laboratory Name | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Contact Phone | 0755-84616666 |
| Service Hotline | 400-0066-989 |
| [email protected] | |
| Authorised Signatory | Tony Wu, General Manager |
| Date of Issue | November 20, 2025 |
| Scope of Assessment | Single sample test; does not cover entire production |
Frequently Asked Questions
- Q: What does the FCC SDoC certification mean for the ETENWOLF P600?
- The FCC Supplier’s Declaration of Conformity (SDoC) means that the ETENWOLF P600 Electric Balloon Pump has been tested by an accredited laboratory and found to comply with the FCC’s limits for unintentional radio frequency emissions under 47 CFR Part 15, Subpart B. This certification is required before the product can be legally marketed and sold in the United States.
- Q: What is Reference No. WTH25H11294796E?
- Reference No. WTH25H11294796E is the unique document identifier assigned by Waltek Testing Group HCT (Shenzhen) Co., Ltd. to the Verification of Conformity issued for the P600. It corresponds to Registration No. WTH25H11294796 and can be used to retrieve the associated test report and compliance documentation from the laboratory or the responsible party.
- Q: Does FCC Part 15 Subpart B certification cover wireless transmission?
- No. 47 CFR Part 15, Subpart B specifically covers unintentional radiators — devices that generate radio frequency energy incidentally as a by-product of their operation but are not designed to transmit wirelessly. The P600 Electric Balloon Pump falls into this category. Devices intentionally transmitting RF signals would require a different FCC authorisation pathway.
- Q: Can the FCC SDoC certificate be invalidated?
- Yes. The Verification of Conformity is based on a single sample test and does not guarantee compliance of every unit produced. The responsible party, Guangdong Bestek Technology Co., Ltd., is obligated to ensure ongoing compliance. Any product design changes that affect RF emissions, or failure to produce supporting test documentation upon FCC request, may invalidate the SDoC and require the device to be retested before continued sale in the US market.
Related Documents
The following certification types are commonly required or recommended for an electric balloon pump such as the ETENWOLF P600 sold across global markets. Obtaining a complete certification package ensures regulatory compliance and builds consumer trust:
- CE Mark (EMC + LVD) — Required for sale in the European Union and EEA. Covers electromagnetic compatibility under EN 55014 and electrical safety under EN 60335 for household appliances.
- UL / ETL Safety Certification — North American product safety certification verifying compliance with UL 60335 or equivalent standards for electrical appliances.
- RoHS Compliance Certificate — Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) per EU RoHS Directive 2011/65/EU, required for EU market entry.
- REACH Compliance Declaration — Addresses the safe use of chemicals in the product in accordance with EU REACH Regulation (EC) No 1907/2006.
- KC Certification (Korea) — Mandatory for electrical products sold in South Korea, covering electromagnetic compatibility and electrical safety under KC Mark requirements.
- PSE Certification (Japan) — Required for electrical appliances sold in Japan, issued under the Electrical Appliance and Material Safety Act (DENAN).
Document Pages
