What does WEEE compliance mean for the ETENWOLF P600?

WEEE compliance means the ETENWOLF P600 has been assessed against the EU WEEE Directive 2012/19/EU and confirmed to meet minimum targets for reuse, recycling, and recovery at end of life. It ensures the product can be responsibly dismantled and that its materials are directed toward sustainable waste treatment streams rather than landfill.

What recovery and recycling rates did the P600 achieve?

The ETENWOLF P600 achieved a total recovery rate of 88.05% and a reuse and recycling rate of 78.11%, both significantly exceeding the WEEE Directive minimum targets of 75% for recovery and 55% for reuse and recycling applicable from 15 August 2018.

Which WEEE category does the P600 fall under?

The ETENWOLF P600 is classified under WEEE Directive Annex III, Category 5: Small Equipment. This category covers compact electrical and electronic devices that do not fall under larger appliance categories.

What is the main material composition of the P600 by weight?

The ETENWOLF P600 has a total product weight of 1314.64 g. Plastic parts represent the largest material share at 59.17% (777.89 g), followed by metal parts at 31.08% (408.60 g), other components at 8.49% (111.64 g), and the printed circuit board at 1.26% (16.51 g).

Sports & Recreation

ETENWOLF P600 Electric Balloon Pump – WEEE Compliance Test Report (WTH25X11294798C)

Document Overview

Document Overview This page presents the findings of WEEE (Waste Electrical and Electronic Equipment) compliance test report number WTH25X11294798C, issued by Waltek Testing Group (Shenzhen) Co., Ltd. The report evaluates whether the ETENWOLF P600 Electric Balloon Pump meets the reuse, recycling, and recovery targets set…

Document type: Certification Report
Prepared by: Michelle Torres
Published: July 22, 2026
Last reviewed: July 22, 2026
Topics: Sports & Recreation

Document Overview

This page presents the findings of WEEE (Waste Electrical and Electronic Equipment) compliance test report number WTH25X11294798C, issued by Waltek Testing Group (Shenzhen) Co., Ltd. The report evaluates whether the ETENWOLF P600 Electric Balloon Pump meets the reuse, recycling, and recovery targets set out under the EU WEEE Directive 2012/19/EU.

Field	Details
Document Type	WEEE Compliance Test Report
Report Number	WTH25X11294798C
Issuing Body	Waltek Testing Group (Shenzhen) Co., Ltd.
Date of Sample Receipt	2025-11-11
Testing Period	2025-11-11 to 2025-11-17
Date of Issue	2025-11-19
Overall Result	Pass

Product Information

The product evaluated in this report is the ETENWOLF P600 Electric Balloon Pump, a compact electric inflation device manufactured and supplied by Guangdong Bestek Technology Co., Ltd. The unit was assessed as a complete product including all accessories for the purpose of total weight and material composition calculations.

Field	Details
Sample Name	Electric Balloon Pump
Model Number	P600
Applicant	Guangdong Bestek Technology Co., Ltd.
Manufacturer	Guangdong Bestek Technology Co., Ltd.
Manufacturer Address	No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China
Product Total Weight	1314.64 g
WEEE Category (Annex III)	Category 5 – Small Equipment
Reference Model No.	N/A

Key Details

The core assessment of this report covers the reuse, recycling, and recovery rates of the ETENWOLF P600 across all identified material categories. All results exceed the minimum targets required under the WEEE Directive 2012/19/EU effective from 15 August 2018.

Recovery and Recycling Summary

Metric	Minimum Target (%)	Assessed Result (%)	Compliance
Recovered	75	88.05	OK
Re-use and Recycled	55	78.11	OK

Material Composition and Recycling Breakdown

Component / Material	Weight (g)	Weight (%)	Recovered (%)	Re-use & Recycled (%)
Printed Circuit Board (>10 cm²) – A54	16.51	1.26	0.88	0.82
Metal Parts – A23 to A43	408.60	31.08	27.97	24.86
Plastic Parts – A1 to A22	777.89	59.17	53.25	47.34
Other – A44 to A53	111.64	8.49	5.94	5.10
Total	1314.64	100	88.05	78.11

Disassembly Information

Parameter	Details
Connection Techniques	Screws: 33 \| Cells: 0 \| Glue: 0
Disassembly Time	60 minutes
Disassembly Date	2025-11-17
Total Disassembly Components	54 parts (A1–A54)

Selective treatment components identified in the product per Annex VII of the WEEE Directive include a printed circuit board with surface area greater than 10 cm² (component A54, 5.00 cm × 3.80 cm, weighing 16.51 g). Sticker, solder, paint, and printing materials were excluded from the assessment due to insignificant weight and difficulty of separation. Plastics containing brominated flame retardants were not assessed.

Standards & Compliance

The ETENWOLF P600 was evaluated against the following regulatory framework and directive requirements.

Standard / Directive	Description	Result
EU WEEE Directive 2012/19/EU	Waste Electrical and Electronic Equipment – reuse, recycling, and recovery targets	Pass
WEEE Directive 2012/19/EU – Annex II	Selective treatment for materials and components	Compliant
WEEE Directive 2012/19/EU – Annex III	Product category classification – Category 5: Small Equipment	Compliant
WEEE Directive 2012/19/EU – Annex VII	Selective treatment components identification (PCB >10 cm²)	Compliant
Council Directive 96/59/EC	Disposal of polychlorinated biphenyls and polychlorinated terphenyls (PCB/PCT)	Referenced

The disassembly procedure was conducted in accordance with the treatment requirements of Annex II of the WEEE Directive. Manual operation and disassembly tools were applied to simulate end-of-life treatment facility conditions. The objective was to demonstrate that separated components and materials can be reused, recycled, and recovered.

Materials subject to selective treatment under Annex II that were considered during assessment include: PCB-containing capacitors, mercury-containing components, batteries, printed circuit boards, toner cartridges, plastics with brominated flame retardants, asbestos, cathode ray tubes, chlorofluorocarbons (CFC), hydrochlorofluorocarbons (HCFC), hydrofluorocarbons (HFC), hydrocarbons (HC), gas discharge lamps, and liquid crystal displays.

Validity & Certification Body

This test report was prepared and issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited testing laboratory operating under internationally recognized quality and testing standards.

Field	Details
Report Number	WTH25X11294798C
Date of Issue	2025-11-19
Testing Laboratory	Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Address	1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
Laboratory Website	http://www.waltek.com.cn
Telephone	+86-755-33663308
Fax	+86-755-33663309
Email	[email protected]
Signed By	Hugo Chen, Waltek Testing Group (Shenzhen) Co., Ltd.

Important notes regarding this report:

The results apply only to the specific sample(s) tested.
This report may not be reproduced in part without prior written permission from Waltek Testing Group.
The report is invalid without the specific stamp of the test institute and signatures of both compiler and approver.
Applicant-provided information regarding sample identity and authenticity has not been independently verified by Waltek.
If not stamped with an accreditation recognized seal, this report is limited to scientific research, education, and internal quality control use only.

Frequently Asked Questions

What does WEEE compliance mean for the ETENWOLF P600?: WEEE compliance means the ETENWOLF P600 has been assessed against the EU WEEE Directive 2012/19/EU and confirmed to meet minimum targets for reuse, recycling, and recovery at end of life. It ensures the product can be responsibly dismantled and that its materials are directed toward sustainable waste treatment streams rather than landfill.
What recovery and recycling rates did the P600 achieve?: The ETENWOLF P600 achieved a total recovery rate of 88.05% and a reuse and recycling rate of 78.11%, both significantly exceeding the WEEE Directive minimum targets of 75% for recovery and 55% for reuse and recycling applicable from 15 August 2018.
Which WEEE category does the P600 fall under?: The ETENWOLF P600 is classified under WEEE Directive Annex III, Category 5: Small Equipment. This category covers compact electrical and electronic devices that do not fall under larger appliance categories.
What is the main material composition of the P600 by weight?: The ETENWOLF P600 has a total product weight of 1314.64 g. Plastic parts represent the largest material share at 59.17% (777.89 g), followed by metal parts at 31.08% (408.60 g), other components at 8.49% (111.64 g), and the printed circuit board at 1.26% (16.51 g).