ETENWOLF P300 / P300 PLUS Inflator Pump – CE LVD Test Report WTH25X09255938J

Document Overview

Document Overview This page presents the CE Low Voltage Directive (LVD) test report issued for the ETENWOLF P300 / P300 PLUS inflator pump. The report was prepared by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory, and covers safety and electromagnetic field…

Document type
Certification Report
Prepared by
Michelle Torres
Published
Last reviewed
Topics
Sports & Recreation

Document Overview

This page presents the CE Low Voltage Directive (LVD) test report issued for the ETENWOLF P300 / P300 PLUS inflator pump. The report was prepared by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory, and covers safety and electromagnetic field exposure evaluations required for CE marking under the EU Low Voltage Directive.

  • Reference No.: WTH25X09255938J
  • Test Report Form No.: WTX_EN IEC 60335_1_2023B
  • Date of Receipt of Sample: 2025-09-25
  • Date of Test: 2025-09-25 to 2025-09-28
  • Date of Issue: 2025-09-29
  • Overall Test Result: PASS
  • Issuing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd., 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
  • Tested By: John Zhong / Project Engineer
  • Approved By: Harvid Wei / Manager

The test results documented herein apply exclusively to the sample(s) submitted for testing. The report may not be reproduced except in full and with prior written permission from Waltek Testing Group.

Product Information

The product evaluated is a portable electric inflator pump designed for household and indoor use. Full product details extracted from the test report are listed below.

Field Detail
Product Name Inflator Pump
Brand / Trademark ETENWOLF
Model No. P300 / P300 PLUS
Rated Input Voltage 5 V DC
Rated Input Current 2.0 A
Supply Connection DC Connector
Equipment Class Class III (Safety Extra-Low Voltage)
Installation Type Portable appliance, indoor use only
Ingress Protection IPX0 (no water protection rating required)
Country of Manufacture China
Applicant / Manufacturer Guangdong Bestek Technology Co., Ltd., No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China

As a Class III appliance, the P300 operates at safety extra-low voltage and is powered via a DC connector, eliminating risks associated with mains voltage exposure to the user.

Key Details

The test report covers a full clause-by-clause evaluation against the applicable standards. The table below summarises the key test clauses, requirements, and verdicts recorded during testing.

Clause (EN IEC 60335-1) Requirement / Test Area Verdict
Clause 5 General Conditions for Tests (nature of supply, test sequence) Pass
Clause 6.1 Classification – Protection against electric shock (Class III) Pass
Clause 6.2 Protection against harmful ingress of water (IPX0) N/A
Clause 7.1 Marking – Rated voltage, current, manufacturer identity, model reference Pass
Clause 7.1 Marking – Class III symbol (battery-operated / rechargeable battery appliance) Pass
Clause 7.1 Symbol IEC 60417-5172 (Class II) – Not applicable to Class III N/A
Clause 7.1 Detachable power supply part markings Pass
EN 62233:2008 Measurement of electromagnetic fields (EMF) for human exposure Pass

Marking label requirements specify that when the product is placed on the EU market, both the importer name/address and manufacturer name/address must be affixed to the product. The CE mark minimum height is 5 mm and the WEEE symbol minimum height is 7 mm.

Label reference information confirmed on the sample:

  • Product: Inflator Pump
  • Model: P300
  • Input: 5 V / 2.0 A
  • Manufacturer: Guangdong Bestek Technology Co., Ltd., Heyuan City, Guangdong, P.R. China
  • Made in China

Standards & Compliance

The P300 / P300 PLUS inflator pump was evaluated against the following standards as part of its CE LVD certification process.

Standard Title Scope
EN IEC 60335-1:2023+A11:2023 Household and Similar Electrical Appliances – Safety – Part 1: General Requirements Primary safety standard covering construction, protection, marking, and testing requirements for household electrical appliances
EN 62233:2008 Measurement Methods for Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human Exposure Defines measurement methods for EMF emissions to assess human exposure compliance

Both standards are harmonised under the EU Low Voltage Directive (LVD) 2014/35/EU and support CE marking obligations for electrical equipment placed on the European market. The product fully complies with all applicable clauses of these standards.

Key compliance points confirmed:

  • Class III equipment construction verified — operates at safety extra-low voltage
  • All required marking and labelling obligations met per Clause 7
  • EMF human exposure levels within permissible limits per EN 62233:2008
  • General safety construction requirements satisfied per EN IEC 60335-1:2023

Validity & Certification Body

The test report was issued on 2025-09-29 by Waltek Testing Group (Shenzhen) Co., Ltd. Details of the certification body and report validity are provided below.

Field Detail
Report Reference No. WTH25X09255938J
Date of Issue 2025-09-29
Testing Period 2025-09-25 to 2025-09-28
Testing Laboratory Waltek Testing Group (Shenzhen) Co., Ltd.
Laboratory Address 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
Laboratory Website http://www.waltek.com.cn
Tel +86-755-33663308
Fax +86-755-33663309
Email [email protected]
Sub-contracting No sub-contracting to other laboratories
Report Validity Valid as issued; report is invalid without the official stamp of the test institute and authorised signatures

Waltek Testing Group is an internationally recognised testing and certification body providing compliance services across consumer electronics, household appliances, and industrial products. The report bears authorised signatures from the Project Engineer and the Laboratory Manager, confirming its authenticity.

Frequently Asked Questions

What does the CE LVD certification mean for the ETENWOLF P300 inflator pump?

CE LVD (Low Voltage Directive) certification confirms that the P300 inflator pump has been independently tested and verified to meet the electrical safety requirements set by the European Union under Directive 2014/35/EU. The pump passed all applicable clauses of EN IEC 60335-1:2023+A11:2023, making it legally compliant for sale within the EU and EEA markets.

What is the report reference number for the P300 CE LVD test, and when was it issued?

The test report reference number is WTH25X09255938J. Testing was conducted from 2025-09-25 to 2025-09-28 at Waltek Testing Group (Shenzhen) Co., Ltd., and the report was officially issued on 2025-09-29.

Why is the P300 classified as a Class III appliance?

Class III classification means the P300 operates at Safety Extra-Low Voltage (SELV), supplied via a DC connector rated at 5 V / 2.0 A. This classification provides an inherent level of protection against electric shock without requiring additional insulation layers, as the operating voltage itself is too low to pose a direct shock hazard under normal conditions.

Does the P300 inflator pump comply with EMF human exposure limits?

Yes. The P300 was tested according to EN 62233:2008, the standard governing measurement of electromagnetic fields from household appliances with regard to human exposure. The pump passed this evaluation, confirming that EMF emissions during normal operation are within the limits considered safe for users.

Related Documents

The CE LVD test report is one component of the broader compliance documentation package for the ETENWOLF P300 / P300 PLUS inflator pump. The following related certification types are typically required or recommended for this product category:

  • CE EMC Declaration (Electromagnetic Compatibility) – Tests conducted under EN 55014-1 and EN 55014-2 to verify emission and immunity compliance for the EU market.
  • CE RED Certification (Radio Equipment Directive) – Applicable if the product incorporates Bluetooth, Wi-Fi, or other wireless communication modules.
  • UN 38.3 Battery Transport Certification – Required for products containing lithium-ion or lithium-polymer battery cells to comply with international transport safety regulations.
  • RoHS Compliance Report – Confirms the product is free from restricted hazardous substances (lead, mercury, cadmium, etc.) as required by EU RoHS Directive 2011/65/EU.
  • REACH SVHC Declaration – Substance of Very High Concern declaration confirming compliance with REACH Regulation (EC) No 1907/2006.
  • FCC Declaration of Conformity – Required for market entry into the United States, covering radio frequency emissions.
  • KC Certification – Required for the South Korean market under the KC safety and EMC framework.

Document Pages

Document Page 1
Document Page 2
Document Page 3
Document Page 4
Document Page 5
Document Page 6
Document Page 7
Document Page 8
Document Page 9
Document Page 10
Document Page 11
Document Page 12
Document Page 13
Document Page 14
Document Page 15
Document Page 16
Document Page 17
Document Page 18
Document Page 19
Document Page 20
Document Page 21
Document Page 22
Document Page 23
Document Page 24
Document Page 25
Document Page 26
Document Page 27
Document Page 28
Document Page 29
Document Page 30
Document Page 31
Document Page 32
Document Page 33
Document Page 34
Document Page 35
Document Page 36
Document Page 37
Document Page 38
Document Page 39
Document Page 40
Document Page 41
Document Page 42
Document Page 43
Document Page 44
Document Page 45
Document Page 46
Document Page 47
Document Page 48
Document Page 49
Document Page 50
Document Page 51
Document Page 52
Document Page 53
Document Page 54
Document Page 55
Document Page 56
Document Page 57
Document Page 58
Document Page 59
Document Page 60
Document Page 61
Document Page 62
Document Page 63
Document Page 64
Document Page 65
Document Page 66
Document Page 67
Document Page 68
Document Page 69
Document Page 70
Document Page 71
Document Page 72
Document Page 73
Document Page 74
Document Page 75
Document Page 76
Document Page 77
Document Page 78
Document Page 79
Document Page 80
Document Page 81
Document Page 82
Document Page 83
Document Page 84
Document Page 85
Document Page 86
Document Page 87
Document Page 88
Document Page 89
Document Page 90
Document Page 91
Document Page 92
Document Page 93
Document Page 94
Document Page 95
Document Page 96
Document Page 97
Document Page 98
Document Page 99
Document Page 100
Document Page 101
Document Page 102
Document Page 103
Document Page 104
Document Page 105
Document Page 106
Document Page 107
Document Page 108
Document Page 109
Document Page 110
Document Page 111
Document Page 112
Document Page 113
Document Page 114
Document Page 115
Document Page 116
Document Page 117
Document Page 118
Document Page 119
Document Page 120
Document Page 121
Document Page 122
Document Page 123
Document Page 124
Document Page 125
Document Page 126