Document Overview
Document Overview This article covers the official CE Electromagnetic Compatibility (EMC) test report issued for the ETENWOLF L1 Mini Torch. The report was prepared by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited third-party testing laboratory, under internal form reference HCT/RF-23-21. Field Detail Reference…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Lighting Gear
Document Overview
This article covers the official CE Electromagnetic Compatibility (EMC) test report issued for the ETENWOLF L1 Mini Torch. The report was prepared by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited third-party testing laboratory, under internal form reference HCT/RF-23-21.
| Field | Detail |
|---|---|
| Reference Number | WTH25H05118915E |
| Document Type | CE-EMC Test Report |
| Test Report Form No. | TRF EN IEC 55015:2019+A11:2020-EMC-001-V01 |
| Issuing Body | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Date of Issue | 2025-05-22 |
| Date of Sample Receipt | 2025-05-12 |
| Test Period | 2025-05-15 to 2025-05-19 |
| Overall Test Result | Pass |
The report confirms that the product meets the electromagnetic compatibility requirements necessary for CE marking and sale within the European Economic Area. The scope covers conducted disturbance voltage at mains terminals, radiated electromagnetic disturbance, and radiated disturbances across the applicable frequency ranges.
Product Information
The Equipment Under Test (EUT) evaluated in this report is the ETENWOLF L1 Mini Torch, a compact portable lighting device designed and manufactured by Guangdong Bestek Technology Co., Ltd. ETENWOLF is the global brand under which this and related inflation tools and lighting gear products are marketed.
| Attribute | Value |
|---|---|
| Product Name | Mini Torch |
| Model Number | L1 |
| Applicant | Guangdong Bestek Technology Co., LTD |
| Manufacturer | Guangdong Bestek Technology Co., LTD |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Brand | ETENWOLF |
The ETENWOLF L1 is a mini torch (flashlight) intended for consumer and portable use. As an electrical lighting device powered via mains or battery circuitry, it falls within the scope of lamp control gear and lighting equipment EMC standards, specifically those governing electromagnetic emissions.
Key Details
The test report WTH25H05118915E covers three primary EMC emission test categories for the ETENWOLF L1. All three categories returned a passing result against their respective limits.
| Test Category | Standard Applied | Result |
|---|---|---|
| Disturbance Voltage at Mains Terminals | EN IEC 55015:2019+A11:2020 | Pass |
| Radiated Electromagnetic Disturbance | EN IEC 55015:2019+A11:2020 | Pass |
| Radiated Disturbances | EN IEC 55015:2019+A11:2020 | Pass |
| Immunity for Lighting Equipment | EN IEC 61547:2023 | Pass |
| Harmonic Current Emissions | EN IEC 61000-3-2:2019+A1:2021 | Pass |
| Voltage Fluctuations and Flicker | EN 61000-3-3:2013+A2:2021 | Pass |
The laboratory conducted EUT setup, instrument setup, and measurement under controlled conditions. Corrected amplitude and margin calculations were performed for radiated disturbance tests, confirming all measured emissions remained within the permitted limits defined by the applicable standards. Measurement uncertainty was accounted for in accordance with standard laboratory practice.
The test was performed and approved by the following laboratory personnel:
- Tested by: Snow Zeng
- Approved by: Tony Wu
Standards & Compliance
The ETENWOLF L1 Mini Torch was evaluated against the following harmonized European standards, which support CE marking under the applicable EU directives for electromagnetic compatibility and lighting equipment:
| Standard | Title / Scope | Version |
|---|---|---|
| EN IEC 55015:2019+A11:2020 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting equipment and similar equipment | 2019 + Amendment A11:2020 |
| EN IEC 61547:2023 | Equipment for general lighting purposes — EMC immunity requirements | 2023 |
| EN IEC 61000-3-2:2019+A1:2021 | Electromagnetic compatibility — Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) | 2019 + Amendment A1:2021 |
| EN 61000-3-3:2013+A2:2021 | Electromagnetic compatibility — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems | 2013 + Amendment A2:2021 |
These standards are harmonized under the EU EMC Directive 2014/30/EU. Compliance with EN IEC 55015 is specifically required for lighting equipment sold in the European market and demonstrates that the product does not generate excessive electromagnetic interference that could affect other equipment or radio services.
Validity & Certification Body
The test report WTH25H05118915E was issued on 2025-05-22 by Waltek Testing Group HCT (Shenzhen) Co., Ltd., an accredited EMC testing laboratory operating under international quality standards. The report is valid for the specific product model, configuration, and test setup documented within it. Any modification to the product hardware, firmware, or power supply configuration may require re-testing.
| Field | Detail |
|---|---|
| Issuing Laboratory | Waltek Testing Group HCT (Shenzhen) Co., Ltd. |
| Laboratory Address | Building B, Tianji Industrial Park, 1/F. & 2/F. & 3/F., No.30-9, Laiyin Road, Xinsheng Community, Longgang Subdistrict, Longgang District, Shenzhen, Guangdong, China |
| Laboratory Tel | 0755-84616666 |
| Service Tel | 400-0066-989 |
| [email protected] | |
| Report Reference No. | WTH25H05118915E |
| Internal Form Reference | HCT/RF-23-21 |
| Date of Issue | 2025-05-22 |
| Report Pages | 54 pages |
Waltek Testing Group HCT operates under the Waltek Testing Group network, which provides testing, inspection, and certification services globally. The report carries the signatures of the assigned test engineer and approving authority, confirming traceability and accountability for all measurements recorded.
Frequently Asked Questions
- What does the CE-EMC test report WTH25H05118915E confirm for the ETENWOLF L1?
-
Report WTH25H05118915E confirms that the ETENWOLF L1 Mini Torch passed all required electromagnetic compatibility emission and immunity tests. This includes conducted disturbance at mains terminals, radiated electromagnetic disturbance, harmonic current emissions, and voltage fluctuation limits, all tested against the latest applicable EN IEC harmonized standards.
- Which standards were used to test the ETENWOLF L1 for CE-EMC compliance?
-
The product was tested against four standards: EN IEC 55015:2019+A11:2020 for radio disturbance limits, EN IEC 61547:2023 for immunity, EN IEC 61000-3-2:2019+A1:2021 for harmonic current emissions, and EN 61000-3-3:2013+A2:2021 for voltage fluctuations and flicker.
- Who conducted the CE-EMC testing for the ETENWOLF L1 Mini Torch?
-
The testing was conducted by Waltek Testing Group HCT (Shenzhen) Co., Ltd., located in Longgang District, Shenzhen, Guangdong, China. The report was tested by Snow Zeng and approved by Tony Wu, and issued on 2025-05-22.
- Does this CE-EMC report allow the ETENWOLF L1 to be sold in Europe?
-
This EMC test report is one of the technical documents required to support CE marking under the EU EMC Directive 2014/30/EU. Combined with a Declaration of Conformity and any other applicable directive requirements, a passing result on this report supports the legal sale of the ETENWOLF L1 Mini Torch in European Economic Area markets.
Related Documents
For a complete compliance picture of the ETENWOLF L1 Mini Torch, the following related certification and test document types are typically required or recommended alongside the CE-EMC report:
- CE-LVD Test Report — Low Voltage Directive safety testing (EN 60598 or EN 62368-1) confirming electrical safety of the lighting product.
- CE Declaration of Conformity (DoC) — Manufacturer declaration referencing all applicable directives and harmonized standards, required for CE marking.
- RoHS Compliance Report — Confirms restriction of hazardous substances (EU RoHS Directive 2011/65/EU) including lead, mercury, cadmium, and other restricted materials.
- REACH SVHC Declaration — Substance of Very High Concern declaration under REACH Regulation (EC) No 1907/2006.
- UN38.3 Battery Test Report — If the L1 includes a rechargeable lithium battery, a UN38.3 transport safety test report is required for air and ground shipping.
- FCC ID / SDOC Report — If the product is marketed in the United States, an FCC Supplier Declaration of Conformity or FCC ID certification covering Part 15B emission limits is required.
- KC Certification — Required for sale in South Korea, covering safety and EMC requirements under the KC mark framework.
Document Pages
