Document Overview
Document Overview This article summarizes the CE Low Voltage Directive (CE-LVD) test report issued by Waltek Testing Group Co., Ltd. for the ETENWOLF L1 Mini Torch. The report reference number is WTH25D05118916L, covering a full compliance evaluation against applicable EN/IEC luminaire safety and electromagnetic field…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Lighting Gear
Document Overview
This article summarizes the CE Low Voltage Directive (CE-LVD) test report issued by Waltek Testing Group Co., Ltd. for the ETENWOLF L1 Mini Torch. The report reference number is WTH25D05118916L, covering a full compliance evaluation against applicable EN/IEC luminaire safety and electromagnetic field exposure standards. The document spans 79 pages and was issued on 2025-06-26 following physical testing conducted between 2025-05-23 and 2025-06-05. The sample was received on 2025-05-20.
The scope of the report covers the general safety requirements and particular requirements for portable general purpose luminaires, as well as assessment of human exposure to electromagnetic fields from lighting equipment. The overall test result is Pass.
The report was compiled by Desmond Li, Project Engineer, and approved by Deval Qin, Designated Reviewer, both of Waltek Testing Group Co., Ltd., located at No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China.
Product Information
The product under test is the L1 Mini Torch, manufactured and supplied by Guangdong Bestek Technology Co., Ltd., based at No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China. The same entity serves as both applicant and manufacturer.
| Attribute | Detail |
|---|---|
| Product Name | Mini Torch |
| Model | L1 |
| Trade Mark | N/A |
| Rated Voltage | 5 V |
| Rated Current | 1 A |
| Rated Power | 5 W |
| Ambient Temperature (ta) | 25 °C |
| IP Rating | IP20 |
| Safety Class | Class III |
| Supply Connection | Type C (USB-C port) |
| Installation Type | Portable |
| Use Environment | Indoor use only |
| Power Source | Rechargeable battery |
The L1 is a Class III portable luminaire powered via a Type C port and operated by an internal rechargeable battery. It is intended for indoor use only. Markings are attached to the outer surface of the luminaire body. Importer and manufacturer contact details are required to be marked on the product before market placement, in a language readily understood by end-users and market surveillance authorities.
Key Details
Full tests were performed on model L1. All results comply with the requirements of the standards listed on the cover page. The following summarizes the key test findings and classification results:
| Test Area | Standard / Clause | Result |
|---|---|---|
| General Test Requirements (IEC 60598-2-4 Cl. 4.4) | EN 60598-2-4:2018 | Pass |
| Classification – Type of Protection | Class III | Pass |
| Classification – Degree of Protection | IP20 | Pass |
| Ordinary luminaire for indoor use only | IEC 60598-2-4 Cl. 4.5.1 | Pass |
| Suitability for mounting on flammable surfaces | IEC 60598-2-4 Cl. 4.5.3 | Pass |
| Mandatory Markings | IEC 60598-2-4 Cl. 4.6 (3.2) | Pass |
| Language of instructions | English | Pass |
| Symbol for nature of supply | IEC 60598-2-4 Cl. 4.6 (3.3.14) | Pass |
| Integral circuit (charging + LED power) | EN 61347-2-11:2001+A1:2019 with EN 61347-1:2015+AMD1:2021 | Pass |
| Switch endurance test | EN IEC 61058-1:2018 (10,000 cycles) | Pass |
| Integral LED module assessment | EN IEC 62031:2020+A11:2021 | Pass |
| Retinal blue light hazard | IEC/TR 62778:2014 – Risk Group RG1 | Pass |
| EMF exposure assessment | EN 62493:2015+A1:2022 | Pass |
A subcontracted test was conducted for the retinal blue light hazard (clause 24.2 of IEC 60598-1) by Waltek Testing Group (Foshan) Co., Ltd. (CNAS license No. L6478). Only the most unfavorable results are recorded in the full report. The WEEE mark height is at least 7 mm; other graphical symbols are at least 5 mm; letters and numerals are at least 2 mm in height.
Standards & Compliance
The L1 Mini Torch was evaluated against the following harmonized European and international standards:
| Standard | Title | Role in Assessment |
|---|---|---|
| EN IEC 60598-1:2021+A11:2022 | Luminaires – Part 1: General requirements and tests | Primary safety standard; general requirements |
| EN 60598-2-4:2018 | Luminaires – Part 2: Particular requirements, Section 4 – Portable general purpose luminaires | Particular requirements for portable luminaires |
| EN 62493:2015+A1:2022 | Assessment of lighting equipment related to human exposure to electromagnetic fields | EMF exposure evaluation |
| EN 61347-2-11:2001+A1:2019 | Lamp controlgear – Part 2-11: Particular requirements for electronic controlgear for battery-supplied LED modules | Integral charging circuit assessment |
| EN 61347-1:2015+AMD1:2021 | Lamp controlgear – Part 1: General and safety requirements | Used in conjunction with EN 61347-2-11 |
| EN IEC 61058-1:2018 | Switches for appliances – Part 1: General requirements | Switch endurance (10,000 cycles) |
| EN IEC 62031:2020+A11:2021 | LED modules for general lighting – Safety specifications | Integral LED module assessment |
| IEC/TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires | Retinal blue light hazard classification (RG1) |
The product’s CE marking is supported by compliance with the Low Voltage Directive (LVD) through this test report. All applicable clauses returned a Pass verdict. Clauses marked N/A were confirmed as not applicable to the product type and construction.
Validity & Certification Body
The test report WTH25D05118916L was issued on 2025-06-26 by Waltek Testing Group Co., Ltd. The results are valid for the specific sample tested. The report is not reproducible in part without prior written permission from Waltek, and is invalid without the specific stamp of the test institute and the signatures of the compiler and approver.
| Field | Detail |
|---|---|
| Report Reference No. | WTH25D05118916L |
| Date of Issue | 2025-06-26 |
| Date of Test | 2025-05-23 to 2025-06-05 |
| Date of Sample Receipt | 2025-05-20 |
| Testing Laboratory | Waltek Testing Group Co., Ltd. |
| Lab Address | No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China |
| Lab Phone | +86-769-2267 6998 |
| Lab Fax | +86-769-2267 6828 |
| Lab Website | http://www.waltek.com.cn |
| Subcontracted Lab | Waltek Testing Group (Foshan) Co., Ltd. – CNAS No. L6478 |
| Compiled By | Desmond Li, Project Engineer |
| Approved By | Deval Qin, Designated Reviewer |
| Overall Result | Pass |
Waltek Testing Group is a recognized third-party testing and certification body operating in China. The CNAS accreditation of the Foshan branch (license No. L6478) validates the subcontracted blue light hazard test results included in this report.
Frequently Asked Questions
- What does this CE-LVD test report confirm for the ETENWOLF L1?
-
Report WTH25D05118916L confirms that the L1 Mini Torch passed all applicable safety tests required under the CE Low Voltage Directive. Testing covered general luminaire safety (EN IEC 60598-1:2021+A11:2022), portable luminaire particular requirements (EN 60598-2-4:2018), and electromagnetic field exposure assessment (EN 62493:2015+A1:2022), all returning a Pass verdict.
- What is the safety class and IP rating of the L1 Mini Torch?
-
The L1 is classified as Class III, meaning it operates on safety extra-low voltage (SELV) supplied via a Type C port from a rechargeable battery. Its ingress protection rating is IP20, providing protection against solid objects greater than 12 mm but no specific protection against water. It is rated for indoor use only.
- What is the blue light hazard risk group for the L1?
-
The retinal blue light hazard assessment, conducted in accordance with IEC/TR 62778:2014, classified the L1 as Risk Group 1 (RG1). RG1 indicates no photobiological hazard under normal behavioral limitations, making it safe for general consumer and indoor use.
- Is the ETENWOLF L1 compliant with EU regulations for lighting equipment?
-
Yes. The L1 Mini Torch has been tested and found compliant with the harmonized European standards applicable under the CE Low Voltage Directive, as documented in Waltek test report WTH25D05118916L dated 2025-06-26. This supports the product’s CE marking for placement on the European market.
Related Documents
For a complete compliance picture of the L1 Mini Torch, the following related certification and documentation types are relevant:
- CE-EMC Test Report – Electromagnetic compatibility testing under the EMC Directive (2014/30/EU), covering radiated and conducted emissions as well as immunity.
- CE Declaration of Conformity (DoC) – The formal declaration by the manufacturer confirming compliance with all applicable EU directives, required for CE marking.
- RoHS Compliance Report – Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) in accordance with EU RoHS Directive 2011/65/EU.
- UN38.3 Battery Safety Test Report – Required for transport of products containing lithium rechargeable batteries, covering altitude, thermal, vibration, shock, and short-circuit tests per UN38.3.
- REACH SVHC Declaration – Substance of Very High Concern declaration confirming compliance with EU REACH Regulation (EC) No 1907/2006.
- FCC / KC Certification – Market access certifications for the United States and South Korea respectively, covering radio frequency and electronic safety requirements.
Document Pages
