Document Overview
Document Overview This page presents the official safety test report for the ETENWOLF L1 Mini Torch, issued by Waltek Testing Group Co., Ltd. under reference number WTH25D05118914L. The document is a full compliance test report covering both the UL 1576:2022 + R:Dec 16, 2024 standard…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Lighting Gear
Document Overview
This page presents the official safety test report for the ETENWOLF L1 Mini Torch, issued by Waltek Testing Group Co., Ltd. under reference number WTH25D05118914L. The document is a full compliance test report covering both the UL 1576:2022 + R:Dec 16, 2024 standard for Flashlights and Lanterns and the CSA C22.2 No. 250.5:22 (Edition 1) standard. The report scope covers safety construction, component requirements, battery system evaluation, marking, and flammability performance for a battery-powered flashlight product.
| Field | Detail |
|---|---|
| Report Reference No. | WTH25D05118914L |
| Document Type | Safety Test Report |
| Issuing Body | Waltek Testing Group Co., Ltd. |
| Date of Sample Receipt | 2025-05-20 |
| Date of Testing | 2025-05-23 to 2025-06-05 |
| Date of Issue | 2025-06-26 |
| Overall Test Result | Pass |
Product Information
The product evaluated in this report is the ETENWOLF L1 Mini Torch, manufactured and supplied by Guangdong Bestek Technology Co., Ltd. The unit is a compact, battery-powered mini torch designed for personal and portable lighting use. Below is a full summary of the product’s technical specifications as recorded in the test report.
| Attribute | Value |
|---|---|
| Product Name | Mini Torch |
| Model | L1 |
| Trade Mark | N/A |
| Charging Input | 5V, 1A, 5W |
| Battery Model | XD122050-1500mAh |
| Battery Voltage | 3.8V |
| Battery Capacity | 1500 mAh |
| Battery Energy | 5.7 Wh |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The product label, located on the outer surface of the unit, displays the model designation L1, rated charging parameters (5V, 1A, 5W), manufacturer name, and a date code in YYMM format. For example, the code 2505 indicates May 2025.
Key Details
The test report follows the two-standard matrix format combining UL 1576 and CSA C22.2 No. 250.5:22 requirements. Each clause was evaluated and assigned a verdict of Pass (P), Fail (F), or Not Applicable (N/A). The following table summarises the key clauses assessed during testing of the L1 Mini Torch.
| Clause | Requirement Area | Verdict |
|---|---|---|
| 5.1.1 | General component safety requirements — fire, electric shock, and personal injury risk | Pass |
| 5.1.2 | Specific component requirements reference | Pass |
| 5.1.3 | Component standard compliance conditions (scope, intended use, ratings) | Pass |
| 5.1.4 | Exceptions to component standard compliance | N/A |
| 5.1.5 | Most unfavorable battery pack configuration | N/A |
| 5.2.1 | Internal wiring — insulated conductors at hazardous voltages | Pass |
| 5.2.1.2 | Alternative conductor compliance path (UL 44, UL 83, UL 66) | Pass |
| 5.2.3.1 | Marking and labeling systems (CSA C22.2 No. 0.15 / UL 969) | Pass |
| 5.2.4.1 | Printed wiring board flammability — V-1 or better per UL 94 | Pass |
| 5.2.4.2 | PWB bonding exception for non-hazardous voltage circuits | N/A |
| 5.2.5.1 | Power switching semiconductor device insulation | Pass |
The compiled report was prepared by Desmond Li (Project Engineer) and approved by Deval Qin (Designated Reviewer) at Waltek Testing Group Co., Ltd. All test verdicts were recorded under the standard notation system where P denotes the sample met the requirement and N/A denotes the clause does not apply to this product configuration.
Standards & Compliance
The ETENWOLF L1 Mini Torch was evaluated against the following safety standards. Both standards apply to battery-powered flashlights and lanterns sold in North American markets and address construction safety, component requirements, marking, flammability, and electrical performance.
| Standard | Title | Edition / Revision |
|---|---|---|
| UL 1576 | Standard for Safety — Flashlights and Lanterns | 2022 + R: Dec 16, 2024 |
| CSA C22.2 No. 250.5:22 | Flashlights and Lanterns (Canadian standard) | Edition 1, 2022 |
Supporting component standards referenced during evaluation include:
- UL 758 — Appliance Wiring Material
- CSA C22.2 No. 210 — Appliance Wiring Material
- UL 44 / CSA C22.2 No. 38 — Thermoset-Insulated Wires and Cables
- UL 83 / CSA C22.2 No. 75 — Thermoplastic-Insulated Wires and Cables
- UL 969 — Marking and Labeling Systems
- UL 796 — Printed-Wiring Boards
- UL 94 — Tests for Flammability of Plastic Materials (V-1 rating required)
- UL 157 — Gaskets and Seals
- UL 746E — Polymeric Materials — Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed Wiring Boards
- CSA C22.2 No. 0.23 / UL 2595 — Hazardous Voltage definitions
The printed wiring board used in the L1 achieved a flammability rating of V-1 or better as required by UL 94 and CAN/CSA C22.2 No. 0.17, confirming suitability for use in consumer lighting products.
Validity & Certification Body
The test report reference WTH25D05118914L was issued on 2025-06-26 by Waltek Testing Group Co., Ltd., an accredited third-party safety testing laboratory based in Dongguan, Guangdong, China.
| Field | Detail |
|---|---|
| Testing Laboratory | Waltek Testing Group Co., Ltd. |
| Laboratory Address | No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China |
| Laboratory Website | http://www.waltek.com.cn |
| Telephone | +86-769-2267 6998 |
| Fax | +86-769-2267 6828 |
| Report Compiled By | Desmond Li, Project Engineer |
| Report Approved By | Deval Qin, Designated Reviewer |
| Report Issue Date | 2025-06-26 |
| Total Report Pages | 48 |
The test report is valid solely for the sample(s) tested and may not be reproduced in part without prior written permission from Waltek Testing Group Co., Ltd. The report is only valid when accompanied by the specific stamp of the test institute and the original signatures of the compiler and approver. Results apply exclusively to the model L1 as submitted for testing.
Frequently Asked Questions
- What does the UL 1576 test report for the L1 Mini Torch confirm?
-
The UL 1576 test report (reference WTH25D05118914L) confirms that the ETENWOLF L1 Mini Torch meets the safety requirements of UL 1576:2022 + R:Dec 16, 2024 and CSA C22.2 No. 250.5:22 (Edition 1) for battery-powered flashlights and lanterns. It covers construction safety, component compliance, marking permanence, printed wiring board flammability, and electrical performance.
- What are the charging specifications for the L1 Mini Torch?
-
The L1 Mini Torch is rated for charging at 5V, 1A, with a maximum power of 5W. The internal battery is model XD122050-1500mAh, rated at 3.8V with a capacity of 1500 mAh (5.7 Wh).
- Who conducted the UL 1576 testing and when was it completed?
-
Testing was conducted by Waltek Testing Group Co., Ltd. in Dongguan, Guangdong, China. The sample was received on 2025-05-20, testing ran from 2025-05-23 to 2025-06-05, and the report was issued on 2025-06-26. The report was compiled by Desmond Li and approved by Deval Qin.
- Does the L1 Mini Torch comply with both US and Canadian safety standards?
-
Yes. The ETENWOLF L1 Mini Torch was tested against both UL 1576 (United States) and CSA C22.2 No. 250.5:22 (Canada), achieving a Pass result under both standards, making it suitable for the North American market.
Related Documents
To support a complete compliance and market-access profile for the ETENWOLF L1 Mini Torch, the following related certification and test report types are recommended:
- UN 38.3 Battery Transport Test Report — Required for air and sea shipping of lithium battery products. The L1 contains a 3.8V / 1500 mAh Li-ion cell and will require a valid UN 38.3 report for international logistics.
- CE Declaration of Conformity (DoC) — Required for sale in the European Economic Area, covering Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC) requirements applicable to portable lighting products.
- FCC Part 15 Test Report — Required for US market entry if the device contains any intentional or unintentional radio frequency emitters or digital circuitry, assessed under FCC Part 15 rules.
- RoHS Compliance Report — Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) in the product’s electrical and electronic components for EU and global market compliance.
- REACH SVHC Declaration — Substances of Very High Concern declaration relevant for the product’s plastic enclosure, wiring insulation, and battery cell materials.
- KC Certification (Korea) — Required for the South Korean market; covers electrical safety of portable battery-powered consumer electronics under the KC mark scheme.
- IP Rating Test Report — An ingress protection (IP) assessment under IEC 60529 would be relevant if the L1 is marketed with any water or dust resistance claims.
Document Pages
