Document Overview
Document Overview This article summarises the official CE and Low Voltage Directive (LVD) test report issued for the ETENWOLF P200 electric ball pump. The report was prepared by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory, and carries reference number WTH25X05134193J. Document…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Sports & Recreation
Document Overview
This article summarises the official CE and Low Voltage Directive (LVD) test report issued for the ETENWOLF P200 electric ball pump. The report was prepared by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory, and carries reference number WTH25X05134193J.
- Document Type: CE / CE-LVD Safety Test Report
- Report Number: WTH25X05134193J
- Test Report Form No.: WTX_EN IEC 60335_1_2023B
- Date of Sample Receipt: 2025-05-27
- Test Period: 2025-05-27 to 2025-06-03
- Date of Issue: 2025-06-05
- Overall Test Result: PASS
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd., 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
The results presented in this report relate exclusively to the sample(s) tested. The report may not be reproduced, except in full, without the written approval of the issuing laboratory.
Product Information
The tested product is the ETENWOLF P200 electric ball pump, designed for inflating sports balls and similar inflatables in household and indoor environments.
| Attribute | Detail |
|---|---|
| Product Name | Ball Pump |
| Model Number | P200 |
| Brand / Trademark | ETENWOLF |
| Rated Input Voltage | 5 V DC |
| Rated Input Current | 2.0 A |
| Supply Connection | DC Connector |
| Equipment Class | Class III (extra-low voltage) |
| IP Rating | IPX0 (no ingress protection) |
| Installation / Use | Portable appliance, indoor use only |
| Country of Manufacture | China |
| Applicant / Manufacturer | Guangdong Bestek Technology Co., Ltd., No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
As a Class III appliance, the P200 operates at safety extra-low voltage (SELV), eliminating direct mains connection and reducing electric shock risk to a minimum. The product is intended for household and similar indoor use only, consistent with the scope of EN IEC 60335-1.
Key Details
The following table summarises the clause-by-clause test findings extracted from the full 127-page report for the ETENWOLF P200.
| Clause (EN IEC 60335-1) | Requirement / Test Area | Verdict |
|---|---|---|
| 5 | General Conditions for Tests (supply nature, test sequence) | Pass |
| 6.1 | Classification – Protection against electric shock: Class III | Pass |
| 6.2 | Protection against harmful ingress of water: IPX0 | N/A |
| 7 – Marking & Instructions | Rated voltage, current, manufacturer identification, model reference | Pass |
| 7 – Class III symbol | IEC 60417-5180 symbol where required (battery-powered exemption applies) | Pass |
| 7 – Detachable power supply | Marking for appliances supplied via detachable power supply part | Pass |
| EN 62233:2008 | EMF measurement – human exposure from household appliances | Pass |
Key label requirements confirmed on the product:
- Model: P200
- Input: 5 V / 2.0 A
- Manufacturer name and address (Guangdong Bestek Technology Co., Ltd.)
- Importer name and address fields provided for EU market placement
- CE mark minimum height 5 mm; WEEE mark minimum height 7 mm
- Made in China declaration
No subcontracting of test items to external laboratories was recorded. All testing was conducted at the Waltek Shenzhen facility.
Standards & Compliance
The ETENWOLF P200 was evaluated against the following harmonised European standards:
| Standard | Title | Relevance |
|---|---|---|
| EN IEC 60335-1:2023+A11:2023 | Household and Similar Electrical Appliances – Safety – Part 1: General Requirements | Primary LVD safety standard; covers construction, marking, protection against electric shock, mechanical hazards, and thermal requirements |
| EN 62233:2008 | Measurement Methods for Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human Exposure | Ensures EMF emissions remain within safe limits for users |
Both standards support CE marking under the EU Low Voltage Directive (LVD) 2014/35/EU and are aligned with the IEC international framework. Compliance with these harmonised standards provides a presumption of conformity with the essential health and safety requirements of the LVD.
The verdict across all applicable clauses was Pass. Clauses marked N/A were confirmed as not applicable to a Class III, IPX0, portable indoor appliance of this type.
Validity & Certification Body
Issuing Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd.
Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China
Tel: +86-755-33663308 | Fax: +86-755-33663309 | Email: [email protected]
Website: www.waltek.com.cn
Report Personnel:
- Tested by: John Zhong, Project Engineer
- Approved by: Harvid Wei, Manager
Report Issue Date: 2025-06-05
Validity: This test report is valid for the specific sample(s) tested under reference number WTH25X05134193J. The report is issued without an explicit expiry date; however, it remains applicable as long as the product design, components, and manufacturing process remain unchanged. Any modification to the product may require re-testing to maintain CE conformity. The report is invalid without the specific stamp of the test institute and the authorised signatures.
For EU market placement, the importer’s name and address must be affixed to the product in addition to the manufacturer details already present on the label.
Frequently Asked Questions
- What does CE/LVD certification mean for the ETENWOLF P200?
- CE marking under the Low Voltage Directive (LVD) 2014/35/EU confirms that the ETENWOLF P200 meets the essential health and safety requirements for electrical equipment sold in the European Economic Area. The LVD specifically covers electrical safety risks such as electric shock, fire, and mechanical hazards.
- Which test standards were applied to the P200, and why do they matter?
- The P200 was tested to EN IEC 60335-1:2023+A11:2023 (general household appliance safety) and EN 62233:2008 (electromagnetic field human exposure). These are the harmonised EU standards for this product category and passing them provides legal presumption of conformity with LVD requirements.
- Is the P200 safe to use indoors around children?
- The P200 is classified as a Class III appliance, meaning it operates at safety extra-low voltage (5 V / 2.0 A via DC connector). This is the safest electrical classification under EN IEC 60335-1. The product is specifically rated for household and indoor use. Always follow the operating instructions and keep small accessories away from young children.
- Where can I find the full test report for the P200?
- The complete 127-page test report carries reference number WTH25X05134193J and was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-06-05. For official documentation requests, contact Waltek at [email protected] or reach out to ETENWOLF directly via etenwolfinflationtools.com.
Related Documents
The following certification and compliance documents are relevant to the ETENWOLF P200 electric ball pump and may be required depending on target market:
- EU Declaration of Conformity (DoC) – Required for legal CE marking; references the harmonised standards passed in this report.
- EMC Test Report (EN 55014 / EN IEC 55014) – Electromagnetic compatibility testing for household appliances, complementing the LVD report for full CE compliance.
- RoHS Compliance Report – Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) in line with EU Directive 2011/65/EU.
- REACH SVHC Declaration – Substances of Very High Concern screening report for EU chemical regulation compliance.
- UN 38.3 Battery Transport Test – If the P200 includes or is sold with a rechargeable battery pack, UN 38.3 certification is required for international shipping.
- FCC / IC Declaration – Required for sale in the United States and Canada; covers radio frequency emissions if any wireless features are present.
- KC Certification – Required for the South Korean market under the KC safety framework.
Document Pages
