Document Overview
Document Overview This page presents the official CE Low Voltage Directive (LVD) test report issued for the ETENWOLF P300 PLUS inflator pump. The document is a full safety compliance test report, not a short-form certificate, covering all applicable general safety requirements and electromagnetic field measurement…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Sports & Recreation
Document Overview
This page presents the official CE Low Voltage Directive (LVD) test report issued for the ETENWOLF P300 PLUS inflator pump. The document is a full safety compliance test report, not a short-form certificate, covering all applicable general safety requirements and electromagnetic field measurement requirements under the relevant European harmonised standards.
| Field | Detail |
|---|---|
| Document Type | Test Report (CE-LVD) |
| Reference Number | WTH25X09255943J |
| Test Report Form No. | WTX_EN IEC 60335_1_2023B |
| Issuing Body | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Date of Receipt of Sample | 2025-09-25 |
| Date of Testing | 2025-09-25 to 2025-09-28 |
| Date of Issue | 2025-10-13 |
| Overall Test Result | Pass |
| Total Pages | 127 |
The report was prepared by John Zhong (Project Engineer) and approved by Harvid Wei (Manager) at the Waltek Shenzhen facility. The results apply exclusively to the sample(s) submitted for testing and may not be reproduced in part without prior written permission from Waltek Testing Group.
Product Information
The product evaluated in this report is the P300 PLUS inflator pump, designed for household and similar electrical applications. The unit is manufactured and supplied by Guangdong Bestek Technology Co., Ltd., operating under the ETENWOLF brand.
| Attribute | Detail |
|---|---|
| Product Name | Inflator Pump |
| Model Number | P300PLUS |
| Trademark / Brand | ETENWOLF (label reference on file) |
| Rated Voltage | 5 V |
| Rated Current | 2.0 A |
| Applicant | Guangdong Bestek Technology Co., LTD |
| Applicant Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Manufacturer | Guangdong Bestek Technology Co., LTD |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The P300 PLUS is a compact, electrically powered inflator pump intended for consumer use. Its low-voltage 5 V / 2.0 A rating places it within the scope of the applicable household appliance safety standards. The label markings on the production unit must, at minimum, contain all information shown on the reference label recorded in the test report.
Key Details
The testing programme covered the full scope required for CE-LVD compliance of a household electrical inflator pump. Both standards listed below were applied to the same physical sample(s) during the test window of 2025-09-25 to 2025-09-28.
| Test Area | Standard Applied | Result |
|---|---|---|
| General electrical safety — household and similar appliances | EN IEC 60335-1:2023+A11:2023 | Pass |
| Electromagnetic field (EMF) measurement — human exposure | EN 62233:2008 | Pass |
Key procedural notes recorded in the report:
- Testing was conducted entirely in-house at the Waltek Shenzhen laboratory — no test items were subcontracted to external laboratories.
- The sample count and identification details are documented on pages 1–2 of the 127-page report.
- The test report form number WTX_EN IEC 60335_1_2023B confirms the use of the current 2023 revision of the IEC 60335-1 test template.
- The report is invalid unless it bears the specific stamp of the test institute and the original signatures of the preparer and approver.
Standards & Compliance
The P300 PLUS was evaluated against the following European harmonised standards, which support compliance with the CE Low Voltage Directive (LVD) 2014/35/EU:
| Standard | Title | Scope Relevance |
|---|---|---|
| EN IEC 60335-1:2023+A11:2023 | Household and Similar Electrical Appliances – Safety – Part 1: General Requirements | Primary safety standard covering insulation, temperature limits, mechanical strength, and protection against electric shock for household electrical appliances |
| EN 62233:2008 | Measurement Methods for Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human Exposure | Defines measurement procedures for EMF emissions to ensure human exposure remains within safe limits during normal appliance operation |
Both standards are harmonised under the EU’s Low Voltage Directive (LVD) 2014/35/EU. Compliance with these standards provides a presumption of conformity with the essential safety requirements of the directive, enabling the CE marking to be affixed to the product for sale within the European Economic Area.
Validity & Certification Body
The test report reference WTH25X09255943J was issued on 2025-10-13 by Waltek Testing Group (Shenzhen) Co., Ltd. Test reports of this type do not carry an expiry date in the traditional certificate sense; however, their validity is contingent on the product remaining unchanged from the tested configuration and on the continued applicability of the referenced standards.
| Field | Detail |
|---|---|
| Report Reference No. | WTH25X09255943J |
| Date of Issue | 2025-10-13 |
| Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Lab Address | 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70, Bao’an District, Shenzhen, Guangdong, China |
| Lab Website | http://www.waltek.com.cn |
| Lab Telephone | +86-755-33663308 |
| Lab Fax | +86-755-33663309 |
| Lab Email | [email protected] |
| Prepared By | John Zhong, Project Engineer |
| Approved By | Harvid Wei, Manager |
| Subcontracted Testing | No |
Waltek Testing Group is a recognised third-party testing and certification organisation operating across multiple international standards. The Shenzhen facility conducted all tests for this report without engaging subcontractors, ensuring a single chain of custody for the sample and test data throughout the evaluation period.
Frequently Asked Questions
- What does the CE-LVD test report WTH25X09255943J confirm about the P300 PLUS?
-
The report confirms that the P300 PLUS inflator pump was independently tested by Waltek Testing Group and found to comply with EN IEC 60335-1:2023+A11:2023 and EN 62233:2008. This supports the manufacturer’s CE Declaration of Conformity under the Low Voltage Directive 2014/35/EU, confirming the product meets European essential safety requirements for household electrical appliances.
- Which specific safety areas are covered by EN IEC 60335-1:2023+A11:2023?
-
EN IEC 60335-1:2023+A11:2023 is the core general safety standard for household and similar electrical appliances. It addresses protection against electric shock, insulation integrity, temperature rise limits during normal and fault conditions, mechanical and structural strength, moisture resistance, and the adequacy of product markings and instructions. All of these areas were evaluated for the P300 PLUS during the test period of 2025-09-25 to 2025-09-28.
- Why is the EN 62233:2008 EMF standard included in a safety test for an inflator pump?
-
EN 62233:2008 is required to assess the electromagnetic field exposure that the appliance may generate for the user during normal operation. Even low-voltage motor-driven products like an inflator pump can produce localised EMF. Including this standard in the test scope ensures that exposure levels remain within the limits considered safe for the general public under the EU’s applicable health and safety framework.
- Is the P300 PLUS test report still valid if the product design changes?
-
No. Test report WTH25X09255943J is specific to the sample configuration tested in September–October 2025. Any significant design, component, or material change to the P300 PLUS would require a technical assessment, and potentially a new or supplementary test report, to maintain valid CE conformity. The report also becomes affected if the harmonised standards it references are withdrawn or superseded without transition provisions.
Related Documents
For a comprehensive CE compliance and market access dossier for the P300 PLUS inflator pump, the following related certification and documentation types are typically required or recommended alongside this LVD test report:
- CE-EMC Test Report — Electromagnetic compatibility testing under Directive 2014/30/EU, typically covering EN 55014-1 (emissions) and EN 55014-2 (immunity) for motor-driven household appliances.
- CE Declaration of Conformity (DoC) — The manufacturer’s formal declaration that the P300 PLUS meets all applicable EU directive requirements, signed and dated, referencing this test report.
- RoHS Compliance Report / Certificate — Confirms the product complies with EU Directive 2011/65/EU restricting hazardous substances such as lead, mercury, cadmium, and certain flame retardants in electrical and electronic equipment.
- REACH SVHC Declaration — Substance of Very High Concern declaration under EU REACH Regulation (EC) No 1907/2006, confirming that no SVHC substances above the 0.1% threshold are present in the product.
- UN38.3 Battery Transport Test Report — If the P300 PLUS incorporates a lithium-ion or lithium-polymer battery, a UN38.3 test report is required for international air and sea freight compliance.
- FCC / IC Certification — Required for sale in the United States and Canada respectively, covering radio frequency and unintentional emissions from the device’s motor and electronics.
- KC Certification — Required for sale in the Republic of Korea under the KC safety and EMC framework for electrical appliances.
- Technical Construction File (TCF) — The internal engineering dossier maintained by the manufacturer, which assembles this test report together with risk assessments, drawings, and the DoC as required under LVD Annex IV.
Document Pages
