Document Overview
Document Overview This document is a RoHS Compliance Certificate issued under EU Directive 2011/65/EU and its amendment (EU) 2015/863. It was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-11-27. The certificate confirms that the product has been tested against all ten regulated hazardous…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Pressure & Measurement
Document Overview
This document is a RoHS Compliance Certificate issued under EU Directive 2011/65/EU and its amendment (EU) 2015/863. It was issued by Waltek Testing Group (Shenzhen) Co., Ltd. on 2025-11-27.
The certificate confirms that the product has been tested against all ten regulated hazardous substances as defined by the RoHS Directive, covering lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), and the four phthalates DEHP, DBP, BBP, and DIBP added under the 2015/863 amendment.
The scope of this certificate extends to two product models — the T300 (primary sample) and the T300PLUS (reference model) — both classified as electronic tire pressure gauges. The certificate also covers the expanded color variants including grey and blue, reflecting the updated new RoHS color scope.
| Field | Detail |
|---|---|
| Document Type | RoHS Compliance Certificate |
| Registration No. | WTH25X07183013R1 |
| Reference No. | WTH25X07183013R1C |
| Date of Issue | 2025-11-27 |
| Issuing Body | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Directive | RoHS 2011/65/EU & Amendment (EU) 2015/863 |
Product Information
The product covered by this certificate is the ETENWOLF T300 / T300PLUS Electronic Tire Pressure Gauge, an electrotechnical consumer product used for measuring and managing tire pressure. Both the T300 and T300PLUS share the same compliance scope under this certificate.
| Field | Detail |
|---|---|
| Sample Name | Electronic Tire Pressure Gauge |
| Model No. | T300 |
| Reference Model No. | T300PLUS |
| Brand | ETENWOLF |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Applicant Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Color Variants Covered | Standard variants plus grey and blue (new RoHS expanded scope) |
Key Details
The following table lists the ten regulated substances tested under the RoHS Directive 2011/65/EU and amendment (EU) 2015/863, along with the applicable test standard used to determine each substance’s concentration level in the T300 / T300PLUS.
| Regulated Substance | Abbreviation | Test Standard | Result |
|---|---|---|---|
| Lead | Pb | IEC 62321-4:2013+AMD1:2017 CSV | Compliant |
| Mercury | Hg | IEC 62321-4:2013+AMD1:2017 CSV | Compliant |
| Cadmium | Cd | IEC 62321-3-1:2013 | Compliant |
| Hexavalent Chromium | Cr(VI) | IEC 62321-7-1:2015 / IEC 62321-7-2:2017 | Compliant |
| Polybrominated Biphenyls | PBB | IEC 62321-6:2015 | Compliant |
| Polybrominated Diphenyl Ethers | PBDE | IEC 62321-6:2015 | Compliant |
| Bis(2-ethylhexyl) phthalate | DEHP | IEC 62321-8:2017 | Compliant |
| Dibutyl Phthalate | DBP | IEC 62321-8:2017 | Compliant |
| Benzylbutyl Phthalate | BBP | IEC 62321-8:2017 | Compliant |
| Diisobutyl Phthalate | DIBP | IEC 62321-8:2017 | Compliant |
The technical documentation was prepared in accordance with EN IEC 63000:2018, which provides the framework for technical documentation supporting RoHS compliance declarations. CE marking may be applied on the basis of this conformity.
Standards & Compliance
The T300 and T300PLUS were tested against the following IEC standards for the determination of regulated substance levels in electrotechnical products:
- IEC 62321-3-1:2013 — Screening of homogeneous materials using X-ray fluorescence spectrometry (XRF); primarily used for cadmium, lead, and bromine screening.
- IEC 62321-4:2013+AMD1:2017 CSV — Determination of mercury and lead in polymers, metals, and electronics by CV-AAS, CV-AFS, ICP-OES, and ICP-MS.
- IEC 62321-5:2013 — Determination of cadmium, lead, and chromium in polymers and electronics, and cadmium and lead in metals by AAS, AFS, ICP-OES, and ICP-MS.
- IEC 62321-6:2015 — Determination of polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) in polymers by GC-MS.
- IEC 62321-7-1:2015 — Determination of hexavalent chromium in colorless and colored morphology in polymers and electronics by a colorimetric method.
- IEC 62321-7-2:2017 — Determination of hexavalent chromium in polymers and electronics by ion chromatography (IC).
- IEC 62321-8:2017 — Determination of phthalates (DEHP, DBP, BBP, DIBP) in polymers by GC-MS and pyrolysis-GC-MS.
- EN IEC 63000:2018 — Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances.
Compliance with these standards satisfies the essential requirements of RoHS Directive 2011/65/EU and amendment (EU) 2015/863, permitting the application of CE marking to the product.
Validity & Certification Body
This certificate was issued on 2025-11-27 and is valid subject to the product design, materials, and manufacturing processes remaining unchanged. The certificate covers the specific test specimens submitted; it does not constitute an assessment of the entire production line.
The signatory authority is Jandy So, General Manager of Waltek Testing Group (Shenzhen) Co., Ltd.
| Field | Detail |
|---|---|
| Issuing Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Website | http://www.waltek.com.cn |
| Telephone | +86-755-33663308 |
| Fax | +86-755-33663309 |
| [email protected] | |
| Signatory | Jandy So / GM |
| Date of Issue | 2025-11-27 |
| Registration No. | WTH25X07183013R1 |
| Reference No. | WTH25X07183013R1C |
Waltek Testing Group is an accredited third-party testing laboratory operating in Shenzhen, China, providing compliance testing and certification services for electrotechnical and consumer products entering the EU and other international markets.
Frequently Asked Questions
- What does this RoHS certificate confirm for the T300 and T300PLUS?
-
It confirms that the ETENWOLF T300 and T300PLUS electronic tire pressure gauges have been tested and found compliant with EU RoHS Directive 2011/65/EU and amendment (EU) 2015/863. All ten regulated hazardous substances — including lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs, DEHP, DBP, BBP, and DIBP — were found within permitted limits.
- Does the grey and blue color variant of the T300 / T300PLUS also carry RoHS compliance?
-
Yes. This certificate explicitly extends to the grey and blue color variants of the T300 / T300PLUS under the expanded new RoHS scope. Both color variants are covered under Reference No. WTH25X07183013R1C.
- Can the T300 / T300PLUS be sold in the EU based on this certificate?
-
RoHS compliance is a prerequisite for CE marking and EU market access for electrotechnical products. This certificate, combined with appropriate technical documentation under EN IEC 63000:2018, supports the manufacturer’s right to affix the CE mark. Other applicable EU directives must also be satisfied before the product is placed on the EU market.
- Who issued this certificate and how can it be verified?
-
The certificate was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory. It can be referenced using Registration No. WTH25X07183013R1 or Reference No. WTH25X07183013R1C. For verification, contact Waltek directly at [email protected] or visit http://www.waltek.com.cn.
Related Documents
The following certification and compliance documents are typically required alongside a RoHS certificate for a product such as the ETENWOLF T300 / T300PLUS electronic tire pressure gauge:
- CE Declaration of Conformity — A manufacturer’s self-declaration covering all applicable EU directives, including RoHS, LVD, and EMC, required for CE marking.
- REACH SVHC Declaration — Confirms that the product does not contain substances of very high concern above 0.1% w/w as defined under the REACH Regulation (EC) No 1907/2006.
- FCC Declaration of Conformity — Required for sale in the United States if the product includes any radio frequency or electronic emissions components.
- UN 38.3 Test Report — If the T300 or T300PLUS includes a lithium battery, a UN 38.3 transport safety test report is required for international shipping compliance.
- KC Certification — Required for the Korean market under the Korean Certification scheme for electrical and electronic products.
- EMC Test Report — Electromagnetic compatibility testing report supporting CE and FCC declarations.
- Calibration Certificate — A measurement accuracy and calibration report relevant for a precision instrument such as a tire pressure gauge.
Document Pages
