Document Overview
Key Findings The ETENWOLF T600 digital tire pressure gauge (model BM2527) passed a 1-meter, 6-face free-fall drop test with zero damage, missing parts, cracking, or system freeze across all three samples. Product: BM2527 (ETENWOLF T600 Digital Tire Pressure Gauge) Drop Height: 1 m (per sender’s…
- Document type
- Test Report
- Prepared by
- Kevin Marshall
- Published
- Last reviewed
- Topics
- Mechanical Reliability
Key Findings
The ETENWOLF T600 digital tire pressure gauge (model BM2527) passed a 1-meter, 6-face free-fall drop test with zero damage, missing parts, cracking, or system freeze across all three samples.
- Product: BM2527 (ETENWOLF T600 Digital Tire Pressure Gauge)
- Drop Height: 1 m (per sender’s requirement)
- Drop Faces: 6 (one drop per face, 6 total falls)
- Sample Size: 3 units
- Sample Weight: 0.122 kg
- Test Surface: Cement floor
- Environment: 25 °C, 68 % RH
- Verdict: Pass
Test Overview
| Field | Details |
|---|---|
| Test Type | Drop Test (Mechanical Reliability) |
| Report Number | 2025061401 |
| Test Date | 2025-06-14 |
| Product Name | ETENWOLF T600 Digital Tire Pressure Gauge (BM2527) |
| Manufacturer / Lab | BESTEK ELECTRONICS CO., LTD |
| Test Quantity | 3 PCS |
| Test Reason | Other |
| Test Objective | Verify the reliability of BM2527 finished products after falling |
| Laboratory Temperature & Humidity | 25 °C, 68 % RH |
| Test Surface | Cement floor |
Test Equipment & Setup
| Parameter | Value |
|---|---|
| Sample | BM2527 Finished Product |
| Sample Weight | 0.122 kg |
| Drop Height | 1 m (per sender’s requirement) |
| Number of Falls | 6 (one per face — six faces total) |
| Test Surface Condition | Cement floor |
| Laboratory Temperature | 25 °C |
| Laboratory Humidity | 68 % RH |
Test Procedure
- Pre-test inspection: Visually inspect each of the 3 sample units for pre-existing damage, verify all parts are intact, and confirm normal operation (no system freeze).
- Environment conditioning: Record ambient temperature and humidity (25 °C, 68 % RH) and confirm conditions are stable before testing.
- Drop execution: Orient the product to the first face. Release from a height of 1 m above the cement floor in a free-fall manner (no spin imparted).
- Six-face sequence: Repeat the free-fall drop for each of the remaining 5 faces — top, bottom, front, back, left, and right — one drop per face, for a total of 6 drops per unit.
- Post-test inspection: After all 6 drops, inspect each unit for damage, missing parts, broken parts, cracking, and system freeze.
- Acceptance criteria: The product must show no damage, no missing parts, no broken parts, no cracking, and no system freeze after the test is completed. Any failure in any unit constitutes a test failure.
Test Data & Results
| Test Item | Requirement | Sample 1 | Sample 2 | Sample 3 | Result |
|---|---|---|---|---|---|
| Drop Height | 1 m | 1 m | 1 m | 1 m | Pass |
| Number of Drops | 6 (6 faces × 1) | 6 | 6 | 6 | Pass |
| Test Surface | Cement floor | Cement floor | Cement floor | Cement floor | Pass |
| Physical Damage (cracks, breaks) | None | None | None | None | Pass |
| Missing Parts | None | None | None | None | Pass |
| Broken / Shattered Parts | None | None | None | None | Pass |
| Cracking | None | None | None | None | Pass |
| System Freeze / Malfunction | None | None | None | None | Pass |
After completing all 6 free-fall drops across all six faces at 1 m onto a cement floor, none of the three samples exhibited any damage, missing parts, broken parts, cracking, or system freeze. All units remained fully functional post-test.
Conclusion
| Field | Details |
|---|---|
| Test Result | After the drop test, the product showed no signs of damage, missing parts, cracking, or system freeze. |
| Standard / Condition | 1 m free fall, 6 faces, cement floor, 25 °C / 68 % RH |
| Samples Tested | 3 PCS |
| Verdict | Pass |
Document Information
| Role | Name |
|---|---|
| Approval (核准) | — |
| Review / Check (核查) | — |
| Tester (测试) | Su Yimei |
| Form Number | BTK-R-Q142/AO |
Frequently Asked Questions
What drop height was used in the ETENWOLF T600 drop test?
The T600 (BM2527) was tested at a drop height of 1 meter, in accordance with the sender’s requirements. All six faces of the unit were dropped once each, for a total of 6 free-fall drops per sample.
Did the ETENWOLF T600 pass the 6-face drop test?
Yes. All three samples passed. After 6 free-fall drops from 1 m onto a cement floor, none of the units showed damage, missing parts, broken parts, cracking, or system freeze.
What surface was used for the T600 drop test?
The test was conducted on a cement floor, which represents a standard hard-surface impact condition for consumer product drop testing.
What are the acceptance criteria for the T600 drop test?
After completing all 6 drops, the product must show no physical damage, no missing or broken parts, no cracking, and no system freeze or malfunction. Any one of these failure modes constitutes a test failure.
Related Products
- ETENWOLF T600 Digital Tire Pressure Gauge — Product page with full specifications