Document Overview
Document Overview This article presents the CE Low Voltage Directive (LVD) certification document for the ETENWOLF T300/T300PLUS electronic tire pressure gauge. The certification was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory based in Shenzhen, China. The document confirms compliance…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- European Union: CE / RoHS / REACH / WEEE
Document Overview
This article presents the CE Low Voltage Directive (LVD) certification document for the ETENWOLF T300/T300PLUS electronic tire pressure gauge. The certification was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory based in Shenzhen, China.
The document confirms compliance with the Low Voltage Directive 2014/35/EU, which is a mandatory requirement for placing electrical and electronic products on the European market. The CE marking may be affixed to the product following preparation of the required technical documentation and Declaration of Conformity.
| Field | Detail |
|---|---|
| Document Type | CE-LVD Certification |
| Registration No. | WTH25X07183006 |
| Reference No. | WTH25X07183006J |
| Issuing Body | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Issue Date | 2025-07-17 |
| Applicable Directive | Low Voltage Directive 2014/35/EU |
Product Information
The certified product is an electronic tire pressure gauge designed for accurate measurement of tire inflation levels. The T300/T300PLUS models are manufactured and distributed by Guangdong Bestek Technology Co., Ltd, operating under the ETENWOLF brand for global inflation tools and lighting gear markets.
| Field | Detail |
|---|---|
| Product Name | Electronic Tire Pressure Gauge |
| Model(s) | T300 / T300PLUS |
| Trade Name | — |
| Power Supply | 3V (1.5V AAA × 2 batteries) |
| Applicant | Guangdong Bestek Technology Co., Ltd |
| Manufacturer | Guangdong Bestek Technology Co., Ltd |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The T300 and T300PLUS are battery-powered measurement instruments intended for consumer and professional use. Their low-voltage, battery-only operation places them within the scope of both LVD measurement equipment safety standards.
Key Details
The certification is founded on testing conducted against the applicable harmonised European standard. The results confirm that the T300/T300PLUS meets all essential safety requirements under the Low Voltage Directive 2014/35/EU.
| Parameter | Value |
|---|---|
| Registration No. | WTH25X07183006 |
| Reference No. | WTH25X07183006J |
| Test Standard | EN 61010-1:2010+A1:2019 |
| Standard Scope | Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements |
| Rated Voltage | 3V (1.5V AAA × 2) |
| Compliance Result | In compliance with Low Voltage Directive 2014/35/EU |
| CE Marking Eligibility | Yes — CE marking may be affixed after Declaration of Conformity is prepared |
| Evaluation Basis | Single sample evaluation; does not imply assessment of whole production |
It is noted in the certificate that other relevant EU Directives must also be observed by the manufacturer. This typically includes the Electromagnetic Compatibility Directive (EMC 2014/30/EU) and the RoHS Directive (2011/65/EU) where applicable.
Standards & Compliance
The T300/T300PLUS was tested against the following harmonised standard recognised under the Low Voltage Directive 2014/35/EU:
- EN 61010-1:2010+A1:2019 — Safety requirements for electrical equipment for measurement, control, and laboratory use, Part 1: General requirements. This standard covers protection against electric shock, fire hazards, mechanical hazards, and radiation for battery-powered and mains-connected measurement instruments.
Compliance with EN 61010-1:2010+A1:2019 provides a presumption of conformity with the essential health and safety requirements set out in Annex I of the Low Voltage Directive 2014/35/EU.
For a complete CE marking declaration, the manufacturer is required to also prepare a technical file and sign a Declaration of Conformity (DoC) in accordance with Annex IV of the LVD. Additional directives that may apply to this product category include:
Validity & Certification Body
The certification was signed and issued on 2025-07-17 by Jandy So, Manager at Waltek Testing Group (Shenzhen) Co., Ltd. The certificate is version-stamped Ver.09.24 and carries Registration No. WTH25X07183006.
| Field | Detail |
|---|---|
| Certificate Issue Date | 2025-07-17 |
| Signed By | Jandy So, Manager |
| Testing Laboratory | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Laboratory Website | http://www.waltek.com.cn |
| Laboratory Tel | +86-755-3366 3308 |
| Laboratory Fax | +86-755-3366 3309 |
| Laboratory Email | [email protected] |
| Trademark Notice | WALTEK is a registered trademark; use requires prior approval |
The certificate is based on a single-sample evaluation of the submitted product. It does not constitute an ongoing production audit or quality management system assessment. Manufacturers are advised to maintain technical documentation and update certifications when product changes occur.
Frequently Asked Questions
- What does the CE-LVD certification mean for the T300/T300PLUS?
-
CE-LVD certification confirms that the T300/T300PLUS electronic tire pressure gauge has been tested and found compliant with the Low Voltage Directive 2014/35/EU. This allows the CE marking to be affixed to the product, indicating it meets EU safety requirements and may be legally sold across European Economic Area markets.
- Which test standard was used to certify the T300/T300PLUS?
-
The product was tested against EN 61010-1:2010+A1:2019, the harmonised standard covering safety requirements for electrical measurement, control, and laboratory equipment. This standard is recognised as giving presumption of conformity with the essential requirements of the LVD 2014/35/EU.
- Who issued the CE-LVD certificate for the T300/T300PLUS?
-
The certificate was issued by Waltek Testing Group (Shenzhen) Co., Ltd., Registration No. WTH25X07183006, Reference No. WTH25X07183006J, on 2025-07-17. The certifying manager is Jandy So.
- Does CE-LVD certification cover all regulatory requirements for EU sale?
-
CE-LVD covers the low voltage safety aspect. For full EU market compliance, the T300/T300PLUS may also need to comply with additional directives such as the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. The certificate explicitly notes that other relevant directives must be observed by the manufacturer.
Related Documents
For a comprehensive compliance and regulatory file for the T300/T300PLUS electronic tire pressure gauge, the following related certification and documentation types are recommended:
- CE-EMC Certificate — Electromagnetic Compatibility testing under EN 55032 / EN 55035 and Directive 2014/30/EU, required alongside LVD for full CE marking on electronic measurement devices.
- RoHS Test Report — Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) under RoHS Directive 2011/65/EU, mandatory for EU market access.
- REACH Compliance Declaration — Confirms compliance with REACH Regulation (EC) No 1907/2006 regarding Substances of Very High Concern (SVHC).
- FCC Declaration of Conformity — Required for the US market if the device emits radio frequency energy; covers Part 15 requirements of the FCC rules.
- UN 38.3 Battery Test Report — If the product is shipped with batteries, a UN 38.3 test report is required for transport safety of lithium or alkaline battery cells.
- KC Certification — Required for the South Korean market under the KC mark scheme, covering electrical safety and EMC for electronic consumer products.
- EU Declaration of Conformity (DoC) — A mandatory manufacturer-signed document listing all applicable directives and standards, required to legally affix the CE mark per LVD Annex IV.
Document Pages
