Document Overview
Document Overview This document is a CE Low Voltage Directive (LVD) Certification issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory based in Shenzhen, China. The certificate confirms that the product has been evaluated against the applicable safety standard and found…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Pressure & Measurement
Document Overview
This document is a CE Low Voltage Directive (LVD) Certification issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party testing laboratory based in Shenzhen, China. The certificate confirms that the product has been evaluated against the applicable safety standard and found compliant with EU Low Voltage Directive 2014/35/EU.
- Registration No.: WTH25X07183011
- Reference No.: WTH25X07183011J
- Document Type: CE-LVD Compliance Certificate
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Issue Date: 2025-07-17
- Scope: Verification of compliance with essential safety requirements for electrical measurement equipment under the EU Low Voltage Directive
Product Information
The certified product is the ETENWOLF T200 Tire Pressure Detector, a portable battery-powered device designed for measuring tire pressure. Below are the key product details as recorded in the certification document.
| Field | Detail |
|---|---|
| Product Name | Tire Pressure Detector |
| Model | T200 |
| Trade Name | — |
| Technical Data | 3V (1.5V AAA × 2) |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No. 1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
Key Details
The following table summarizes the critical certification data extracted from the official CE-LVD certificate for the T200.
| Item | Value |
|---|---|
| Certificate Registration No. | WTH25X07183011 |
| Reference No. | WTH25X07183011J |
| Applicable Directive | Low Voltage Directive 2014/35/EU |
| Test Standard | EN 61010-1:2010+A1:2019 |
| Standard Scope | Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements |
| Power Supply | 3V DC (2 × 1.5V AAA batteries) |
| Compliance Result | Compliant |
| CE Marking | Authorized for affixing upon completion of technical documentation and Declaration of Conformity |
| Evaluation Basis | Single sample evaluation; does not imply assessment of whole production |
| Authorized Manager | Jandy So |
The certificate confirms that the referred test report demonstrates the product meets the essential requirements of the Low Voltage Directive. The manufacturer is responsible for preparing the full technical documentation and Declaration of Conformity (DoC) before affixing the CE mark.
Standards & Compliance
The T200 was tested against the following standard recognized under the EU Low Voltage Directive framework:
- EN 61010-1:2010+A1:2019 — Safety requirements for electrical equipment for measurement, control, and laboratory use, Part 1: General requirements. This harmonized standard provides presumption of conformity with the essential health and safety requirements of Directive 2014/35/EU.
The LVD applies to electrical equipment designed for use within certain voltage ranges. Although the T200 operates at 3V (battery-powered, below the LVD voltage threshold for AC), the manufacturer elected certification under EN 61010-1 to demonstrate safety compliance appropriate for a measurement instrument intended for consumer and professional use within the European market.
Other relevant EU Directives — such as the Radio Equipment Directive (RED) or the RoHS Directive — may additionally apply and must be observed independently by the manufacturer.
Validity & Certification Body
Certification Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Website: www.waltek.com.cn
- Tel: +86-755-3366 3308
- Fax: +86-755-3366 3309
- Email: [email protected]
Waltek Testing Group is an internationally recognized testing and certification organization. The WALTEK trademark is registered, and its use requires prior approval.
Certificate Issue Date: 2025-07-17
Authorized Signatory: Jandy So (Manager)
This certificate is based on a single-sample evaluation of the submitted product. It represents a point-in-time compliance assessment and does not constitute ongoing production surveillance. The certificate version is referenced as Ver. 09.24. Validity of CE compliance is contingent on the manufacturer maintaining product conformity and keeping the technical documentation up to date. Should the product design or components change materially, re-evaluation may be required.
Frequently Asked Questions
- Q: What does the CE-LVD certification mean for the ETENWOLF T200?
- CE-LVD certification means the T200 has been tested by an accredited laboratory and found compliant with the EU Low Voltage Directive 2014/35/EU. This allows the manufacturer to affix the CE mark and legally place the product on the European market, confirming it meets essential electrical safety requirements.
- Q: Which test standard was applied to the T200, and what does it cover?
- The T200 was tested to EN 61010-1:2010+A1:2019, a harmonized European standard covering safety requirements for electrical equipment used for measurement, control, and laboratory purposes. It addresses hazards such as electrical shock, fire, mechanical risks, and radiation from electrical equipment.
- Q: Is the CE mark on the T200 valid for the entire production run?
- The certificate is based on a single-sample evaluation and does not automatically cover the entire production. The manufacturer, Guangdong Bestek Technology Co., Ltd., is responsible for ensuring all production units conform to the same design and that the technical documentation and Declaration of Conformity are kept current.
- Q: Does the T200 require any other EU certifications besides CE-LVD?
- The CE-LVD certificate notes that other relevant EU Directives must also be observed. Depending on the product’s features, this could include the RoHS Directive for hazardous substance restrictions and potentially the Radio Equipment Directive if wireless functionality is present. Buyers and importers should verify the complete compliance documentation package.
Related Documents
For a complete EU compliance package for the T200 Tire Pressure Detector, the following related certification and documentation types are recommended:
- EU Declaration of Conformity (DoC) — Mandatory manufacturer declaration required before CE marking is affixed, referencing all applicable directives and standards.
- CE-EMC Certificate — Electromagnetic Compatibility testing under Directive 2014/30/EU, typically required alongside LVD for electronic measurement devices.
- RoHS Compliance Report — Confirms restriction of hazardous substances (lead, mercury, cadmium, etc.) per EU Directive 2011/65/EU as amended by 2015/863/EU.
- REACH Compliance Statement — Addresses restrictions on substances of very high concern (SVHC) under EU REACH Regulation (EC) No 1907/2006.
- UN 38.3 Test Report — If the product ships with lithium batteries in future variants, UN 38.3 transport safety certification would be required.
- FCC / IC Certification — Required for market entry into the United States and Canada respectively, if the product is sold in North American markets.
Document Pages
