Document Overview
Document Overview This page presents the RoHS Verification of Conformity issued for the ETENWOLF T200 Tire Pressure Detector. The document confirms compliance with the RoHS Directive 2011/65/EU and its amending directive (EU) 2015/863, which restricts the use of ten hazardous substances in electrical and electronic…
- Document type
- Certification Report
- Prepared by
- Michelle Torres
- Published
- Last reviewed
- Topics
- Pressure & Measurement
Document Overview
This page presents the RoHS Verification of Conformity issued for the ETENWOLF T200 Tire Pressure Detector. The document confirms compliance with the RoHS Directive 2011/65/EU and its amending directive (EU) 2015/863, which restricts the use of ten hazardous substances in electrical and electronic equipment.
- Document Type: Verification of Conformity (RoHS Certificate)
- Reference Number: WTH25X07183016C
- Registration Number: WTH25X07183016
- Date of Issue: 2025-07-25
- Issuing Body: Waltek Testing Group (Shenzhen) Co., Ltd.
- Scope: Determination of levels of ten regulated substances in electrotechnical products, covering lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), DEHP, DBP, BBP, and DIBP.
The verification confirms that the product complies on a voluntary basis with respect to the submitted sample. It does not imply assessment of the entire production line and does not authorise use of the Waltek test lab logo.
Product Information
The product covered by this certificate is the T200 Tire Pressure Detector, manufactured and applied for by Guangdong Bestek Technology Co., Ltd. Below are the key product identification details as recorded in the certificate.
| Field | Detail |
|---|---|
| Sample Name | Tire Pressure Detector |
| Model Number | T200 |
| Reference Model Number | NA |
| Brand | NA (marketed under ETENWOLF) |
| Applicant | Guangdong Bestek Technology Co., Ltd. |
| Applicant Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
| Manufacturer | Guangdong Bestek Technology Co., Ltd. |
| Manufacturer Address | No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R. China |
The T200 is a tire pressure detection device designed for vehicle tyre monitoring applications, distributed globally under the ETENWOLF brand by Guangdong Bestek Technology Co., Ltd.
Key Details
The RoHS Directive restricts ten hazardous substances. The table below lists each restricted substance, its common abbreviation, and its relevance to the T200 compliance evaluation.
| Restricted Substance | Abbreviation | Relevant IEC Test Standard |
|---|---|---|
| Lead | Pb | IEC 62321-5:2013 |
| Mercury | Hg | IEC 62321-4:2013+AMD1:2017 CSV |
| Cadmium | Cd | IEC 62321-5:2013 |
| Hexavalent Chromium | Cr(VI) | IEC 62321-7-1:2015, IEC 62321-7-2:2017 |
| Polybrominated Biphenyls | PBB | IEC 62321-6:2015 |
| Polybrominated Diphenyl Ethers | PBDE | IEC 62321-6:2015 |
| Bis(2-ethylhexyl) phthalate | DEHP | IEC 62321-8:2017 |
| Dibutyl phthalate | DBP | IEC 62321-8:2017 |
| Benzylbutyl phthalate | BBP | IEC 62321-8:2017 |
| Diisobutyl phthalate | DIBP | IEC 62321-8:2017 |
Testing was conducted by Waltek Testing Group in accordance with the listed IEC 62321 series standards. The screening methodology followed IEC 62321-3-1:2013 for X-ray fluorescence (XRF) screening, with confirmatory chemical analysis performed using the substance-specific standards listed above. All ten substances were found within permissible limits.
Additionally, the technical documentation was prepared in accordance with EN IEC 63000:2018, the harmonised European standard providing the technical documentation framework for RoHS compliance assessment, enabling the CE marking to be affixed to the equipment.
Standards & Compliance
The T200 was tested against the following standards and directives. All tests were conducted by Waltek Testing Group (Shenzhen) Co., Ltd.
| Standard / Directive | Scope |
|---|---|
| IEC 62321-3-1:2013 | Electrotechnical products – Screening by XRF spectrometry |
| IEC 62321-4:2013+AMD1:2017 CSV | Determination of mercury in polymers, metals, and electronics |
| IEC 62321-5:2013 | Determination of cadmium, lead, and chromium in polymers and electronics; mercury in polymers |
| IEC 62321-6:2015 | Determination of polybrominated biphenyls and polybrominated diphenyl ethers |
| IEC 62321-7-1:2015 | Determination of hexavalent chromium in polymers and electronics (colorimetric method) |
| IEC 62321-7-2:2017 | Determination of hexavalent chromium in metallic coatings |
| IEC 62321-8:2017 | Determination of eight phthalates (DEHP, DBP, BBP, DIBP and others) |
| EN IEC 63000:2018 | Technical documentation for assessment of electrical and electronic products with respect to RoHS |
| RoHS Directive 2011/65/EU | Restriction of hazardous substances in electrical and electronic equipment |
| (EU) 2015/863 | Amendment adding four phthalates (DEHP, BBP, DBP, DIBP) to the restricted substances list |
Compliance with the above standards provides presumption of conformity with the essential requirements of the RoHS Directive, and supports affixing the CE marking on the T200 product and its packaging.
Validity & Certification Body
The Verification of Conformity for the T200 was issued on 2025-07-25 and is valid with reference to the sample submitted for testing. As a voluntary conformity document, its continued relevance depends on the product design remaining unchanged from the tested sample.
| Field | Detail |
|---|---|
| Date of Issue | 2025-07-25 |
| Signed By | Jandy So / GM |
| Registration No. | WTH25X07183016 |
| Reference No. | WTH25X07183016C |
| Certification Body | Waltek Testing Group (Shenzhen) Co., Ltd. |
| Website | http://www.waltek.com.cn |
| Telephone | +86-755-33663308 |
| Fax | +86-755-33663309 |
| [email protected] |
Waltek Testing Group is an accredited third-party testing laboratory headquartered in Shenzhen, China, providing testing, inspection, and certification services for consumer electronics and electrotechnical products in accordance with international standards. The verification covers only the submitted sample and does not constitute factory audit or ongoing production surveillance.
Frequently Asked Questions
- What does the T200 RoHS certificate confirm?
- The certificate (Reference No. WTH25X07183016C) confirms that the T200 Tire Pressure Detector has been tested and found compliant with RoHS Directive 2011/65/EU and its amendment (EU) 2015/863. All ten restricted hazardous substances — including lead, mercury, cadmium, hexavalent chromium, PBB, PBDE, DEHP, DBP, BBP, and DIBP — were found within the permissible concentration limits in the tested sample.
- Which testing laboratory issued this RoHS certificate?
- The certificate was issued by Waltek Testing Group (Shenzhen) Co., Ltd., an accredited third-party laboratory based in Shenzhen, China. The document was signed by Jandy So, GM, on 2025-07-25. Waltek can be contacted at +86-755-33663308 or via email at [email protected].
- Does RoHS compliance allow the T200 to carry the CE mark?
- Yes. Compliance with the RoHS Directive 2011/65/EU, supported by technical documentation prepared in accordance with EN IEC 63000:2018, is one of the requirements enabling the CE marking to be affixed to the T200. However, CE marking may also require compliance with other applicable EU Directives relevant to the product category.
- Does this certificate cover the entire production run of the T200?
- No. As stated in the certificate, this Verification of Conformity is issued on a voluntary basis and refers only to the sample submitted for testing. It does not imply an assessment of the whole production and does not permit use of the Waltek test lab logo. Manufacturers are responsible for ensuring ongoing production conformity.
Related Documents
For a comprehensive compliance profile of the T200 Tire Pressure Detector, the following related certification documents are recommended:
- CE Declaration of Conformity (DoC) — A full EU Declaration of Conformity covering all applicable EU Directives (RED, LVD, EMC) in addition to RoHS, required for CE marking on the T200.
- REACH SVHC Compliance Declaration — Confirms that substances of very high concern under the EU REACH Regulation (EC) No 1907/2006 are below 0.1% w/w in the T200 and its components.
- FCC ID / FCC Declaration of Conformity — Required for radio frequency or electronic devices sold in the United States; covers electromagnetic interference and RF exposure for the T200.
- IEC 62368-1 or IEC 60950-1 Safety Test Report — Electrical safety test report demonstrating that the T200 meets international electrical safety requirements.
- EMC Test Report (EN 55032 / EN 55035 / EN 61000 series) — Electromagnetic compatibility testing supporting the CE marking and confirming the T200 does not cause or suffer from unacceptable electromagnetic interference.
Document Pages
